1. Important Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Ensure all parts are present and undamaged before assembly.
- Assemble the plant stand on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly to avoid damaging components.
- Place the assembled stand on a flat, stable surface to prevent tipping.
- Distribute plant weight evenly across the shelves.
- Keep small parts away from children during assembly.
- This product is designed for displaying plants and light decorative items. Do not use it as a climbing structure or for heavy loads.
2. Package Contents
Verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.
Image: Detailed diagram of all components and their respective dimensions.
This image illustrates the various parts included in the package, along with their dimensions. It shows different sizes of wooden shelves, metal support frames, and hardware required for assembly. The main components are labeled with numbers 1 through 4 for the wooden boards, and the metal frames are also visible.
Components List:
- Metal Support Frames (Curved and Straight sections)
- Wooden Shelves (Various sizes: e.g., 52x28cm, 24x18cm, 18x18cm, 24x12cm)
- Screws (Assorted sizes for different connections)
- Allen Wrench
- Hanging Hooks (for suspended plants)
- Anti-scratch Foot Pads
3. Assembly Instructions (Setup)
Follow these steps carefully to assemble your BACEKOLL plant stand. It is recommended to have a second person assist with assembly for easier handling.
- Unpack and Identify Parts: Lay out all components on a clean, soft surface. Refer to the "Package Contents" section and the provided diagram to identify each part.
- Assemble Base Frames: Begin by connecting the lower straight metal frames using the appropriate screws. Ensure they are securely fastened but do not fully tighten yet.
- Attach Lower Shelves: Place the largest wooden shelves onto the assembled base frames. Secure them with screws, ensuring the holes align.
- Connect Curved Frames: Attach the curved metal frames to the base structure. These frames form the main vertical support and the staggered design.
- Install Remaining Shelves: Systematically attach the smaller wooden shelves to the curved and straight metal frames, following the design shown in the product images. Ensure each shelf is level and securely fastened.
- Attach Hanging Hooks: If desired, attach the hanging hooks to the designated points on the upper metal frames for suspended plants.
- Tighten All Screws: Once all parts are in place and the stand is stable, go back and fully tighten all screws. Do not overtighten.
- Apply Foot Pads: Attach the anti-scratch foot pads to the bottom of the metal frames to protect your floor.
Image: The BACEKOLL 9-Tier Plant Stand fully assembled and decorated with plants in a living room setting.
This image provides a visual reference for the completed assembly, showing the staggered shelf design and the overall aesthetic of the plant stand in a home environment.
4. Usage (Operating)
Your BACEKOLL plant stand is designed for versatile use and optimal plant display.
- Placement: Ideal for living rooms, corners, balconies, hallways, gardens, or patios. Ensure the chosen location is level and stable.
- Plant Capacity: The 9-tier design can accommodate 9 or more potted plants, depending on their size.
- Optimal Light Exposure: The staggered arrangement of shelves allows for better light exposure for all your plants.
- Weight Distribution: Distribute the weight of your plants and decorative items evenly across the shelves to maintain stability. Avoid placing excessively heavy items on a single shelf.
- Multifunctional Use: Beyond plants, this stand can serve as a decorative display shelf for books, photos, trophies, or other small ornaments.
Image: Two BACEKOLL plant stands demonstrating their versatility as decorative shelving units in a living room.
This image showcases the plant stand's adaptability, illustrating how it can be used for various decorative purposes beyond just holding plants, such as flanking a television or displaying other household items.
5. Care and Maintenance
Proper care will ensure the longevity and appearance of your plant stand.
- Cleaning: Wipe the metal frames and wooden shelves with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Water Resistance: The wooden shelves are treated for water resistance. However, promptly wipe away any standing water to prevent long-term damage.
- Rust Prevention: The metal frame features a baking paint finish designed to resist rust. Avoid scratching the paint to maintain this protection.
- Screw Tightness: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Environmental Conditions: While suitable for indoor and covered outdoor areas, prolonged exposure to extreme weather conditions (heavy rain, direct intense sunlight) may affect the product's lifespan.
Image: Close-up details highlighting the robust construction, rust-preventative paint, and water-resistant properties of the wooden shelves.
This image visually confirms the quality features of the plant stand, including the thickness of the iron pipes, the protective baking paint finish, and the water-resistant surface of the wooden boards, all contributing to its durability and ease of maintenance.
6. Troubleshooting
If you encounter any issues with your plant stand, refer to the following common problems and solutions:
- Stand is Unstable/Wobbly:
- Ensure all screws are fully tightened.
- Verify the stand is placed on a completely flat and level surface.
- Check if any foot pads are missing or unevenly applied.
- Ensure weight is distributed evenly across the shelves.
- Parts Do Not Align During Assembly:
- Loosen all screws slightly, adjust the parts to align, then retighten.
- Double-check that you are using the correct parts for each step as per the assembly diagram.
- Ensure no parts are installed backward.
- Missing or Damaged Parts:
- Carefully re-check the packaging.
- Contact BACEKOLL customer support with your model number and a description of the missing/damaged part.
7. Specifications
| Brand | BACEKOLL |
| Model Number | B0CYKSQPSH |
| Material | Metal, Wood |
| Color | Black (Frame), Wood Grain (Shelves) |
| Overall Height | Approximately 160 cm (63 inches) |
| Number of Tiers | 9 |
| Assembly Required | Yes |
| Features | Space-saving design, Staggered shelves, Heavy-duty iron pipes, Baking paint (rust-resistant), Water-resistant wood, Anti-scratch foot pads |
8. Warranty and Support
BACEKOLL is committed to providing quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase.
For any questions, missing parts, or assistance with assembly or product use, please contact BACEKOLL customer support through your retailer or the official brand website. Provide your model number (B0CYKSQPSH) when contacting support to expedite assistance.