1. Safety Information
Please read all safety and operating instructions carefully before using this product. Proper use of the Jugbow Dog Training Collar is essential for your dog's safety and comfort.
- Collar Fit: Ensure the collar fits snugly but not too tightly. You should be able to fit two fingers comfortably between the collar and your dog's neck.
- Wear Duration: The receiver collar should not be worn continuously for more than 12 hours. Prolonged wear can cause skin irritation.
- Skin Health: Regularly check your dog's neck for any signs of irritation, redness, or sores. If irritation occurs, discontinue use and consult a veterinarian.
- Supervision: Always supervise your dog when they are wearing the training collar.
- Age & Weight: Suitable for dogs with neck sizes from 7.8 - 24.4 inches and weights from 10 - 120 lbs.
2. Package Contents
The Jugbow DT-61NBU Dog Training Collar package includes the following items:
- 1 x Receiver Collar
- 1 x Remote Control
- 2 x Metal Prongs (long and short)
- 2 x Silicone Caps for Metal Prongs
- 1 x USB Charging Cable
- 1 x Test Light Tool
- 1 x Hand Strap
- 1 x User Manual
Image: Complete package contents of the Jugbow Dog Training Collar.
3. Product Overview
The Jugbow DT-61NBU Dog Training Collar is designed to assist in effective and humane dog training. It features a remote control with a long range and a waterproof receiver collar, making it suitable for various training environments.
- 4 Training Modes: Beep (1-8 levels), Vibration (1-16 levels), Safe Shock (1-99 levels), and Shock Boost (10% higher).
- Extended Range: Up to 4200 feet remote control range for flexible indoor and outdoor training.
- Dual Channel: One remote can control up to two receiver collars simultaneously.
- Waterproof: IPX7 waterproof receiver collar allows dogs to play in water.
- Security Lock: Prevents accidental activation of training modes.
- Long Battery Life: Quick charging with extended standby times for both remote and collar.
Image: The Jugbow DT-61NBU remote control and receiver collar.
Image: Illustration of the collar's 3300ft remote control range and ability to train two dogs.
Video: An overview of the Jugbow 3300FT Dog Training Collar with Remote, highlighting its features and benefits.
4. Setup
4.1 Adjusting the Collar Strap
The collar strap is adjustable to fit various dog sizes (10-120 lbs, neck sizes 7.8-24.4 inches). Ensure a comfortable and secure fit for effective training.
Image: Visual guide for adjusting the collar strap to fit different dog sizes.
Video: Step-by-step instructions on how to adjust the receiver collar strap for a proper fit.
4.2 Replacing Metal Prongs
The collar comes with removable metal prongs and silicone caps. For long-haired dogs, longer prongs may be necessary to ensure proper contact. For continuous wear (up to 12 hours), it is recommended to remove the metal prongs to prevent skin irritation.
Image: Instructions for removing and replacing the metal prongs on the collar.
Video: Guide on how to replace the metal prongs, especially for long-haired dogs.
4.3 Charging the Devices
Both the remote and receiver collar are rechargeable. Use the provided USB cable for charging. A full charge takes approximately 2 hours.
- During charging, the power indicator lights will flash sequentially.
- The remote offers up to 45 days of standby time, and the collar up to 35 days.
Image: Illustration of the quick charging process for both the remote and collar.
Video: Instructions on how to properly charge the Jugbow Dog Training Collar and remote.
4.4 Pairing the Remote and Collar
To ensure proper communication, the remote and receiver collar must be paired.
- Turn off the receiver collar by pressing and holding the ON/OFF button for 3 seconds until the red light appears.
- Press and hold the ON/OFF button on the receiver for 6 seconds until the green light flashes quickly. This indicates pairing mode.
- On the remote, switch to your desired channel (1 or 2).
- Press any one of the beep, vibrate, or shock buttons on the remote to pair. The receiver will beep and flash, confirming successful pairing.
Video: Detailed steps on how to pair the remote control with the collar receiver.
5. Operating Instructions
5.1 Training Modes
The Jugbow DT-61NBU offers four distinct training modes:
- Beep Mode: Provides an audible tone (1-8 levels). Often used as a warning or for positive reinforcement.
- Vibration Mode: Delivers a tactile vibration (1-16 levels). Effective for gaining attention without physical correction.
- Safe Shock Mode: Applies a static correction (1-99 levels). Use with caution and at the lowest effective level.
- Shock Boost: Provides a 10% higher static correction than the selected Safe Shock level.
Image: Overview of the four effective training modes available.
5.2 Adjusting Levels
To adjust the intensity level for Beep, Vibration, or Shock modes:
- Press the rotary knob on the remote.
- Rotate the knob to select the desired level.
5.3 Switching Channels
The remote supports training two dogs. To switch between channels:
- Ensure the receiver collars are turned off and then re-paired to the desired channels.
- Use the channel switch button on the remote to select Channel 1 or Channel 2.
Image: The remote control with its security keypad lock and dual-channel feature.
Video: Demonstrates how to switch between channels on the remote control.
5.4 Security Lock
The remote features a security lock to prevent accidental activation of training modes. Slide the lock switch to the locked position when not actively training to avoid unintended corrections.
6. Maintenance
- Cleaning: Regularly clean the receiver collar and remote with a damp cloth. Ensure the charging port is free from dirt and debris before charging.
- Storage: Store the device in a cool, dry place when not in use.
- Battery Care: Avoid fully discharging the batteries frequently to prolong their lifespan.
7. Troubleshooting
If you encounter issues with your Jugbow Dog Training Collar, consider the following:
- No Response: Check if both the remote and receiver collar are powered on and fully charged. Ensure they are properly paired and on the same channel.
- Weak/Inconsistent Correction: Verify the collar fit and ensure the metal prongs are making proper contact with your dog's skin. For long-haired dogs, consider using longer prongs.
- Remote Not Working: Check the battery level of the remote. Ensure the security lock is disengaged.
- Skin Irritation: Remove the collar immediately. Clean the area and consult a veterinarian. Ensure the collar is not worn for more than 12 hours and is fitted correctly.
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | DT-61NBU |
| Brand | Jugbow |
| Item Weight | 10.2 ounces |
| Remote Range | Up to 4200 feet |
| Waterproof Rating | IPX7 (Receiver Collar) |
| Training Modes | Beep, Vibration, Safe Shock, Shock Boost |
| Battery Type | Lithium Ion (included) |
| Charging Time | Approx. 2 hours |
| Remote Standby Time | Up to 45 days |
| Collar Standby Time | Up to 35 days |
| Collar Material | Nylon |
| Neck Size Fit | 7.8 - 24.4 inches |
| Dog Weight Fit | 10 - 120 lbs |
9. Warranty & Support
The Jugbow DT-61NBU Dog Training Collar comes with a 1-Year Warranty. For any product inquiries, technical support, or warranty claims, please refer to the contact information provided in your product packaging or visit the official Jugbow website.
