Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Mirightone Full Size Floor Bed. Please read all instructions carefully before assembly and use to ensure safe and proper operation.
The Mirightone floor bed is designed to promote a child's independence and freedom of movement, offering a secure and accessible sleeping environment. Its low height allows children to easily get in and out of bed, fostering autonomy.
Specifications
| Feature | Detail |
|---|---|
| Product Type | Floor Bed |
| Size | Full |
| Color | Grey |
| Material | Plywood, MDF, Pinewood |
| Overall Product Dimension | 77"L x 56.5"W x 17.5"H |
| Overall Product Weight | 48.5 LBS |
| Weight Capacity | 400 lbs |
| Recommended Mattress Thickness | 6 inches or less |
| Number of Slats | 7 |
| Assembly Required | Yes |
| Warranty | One year |

Setup and Assembly
Your Mirightone Full Size Floor Bed comes with all necessary hardware and clear instructions for assembly. Please ensure all parts are present before beginning. It is recommended to assemble the bed in the room where it will be used.
Before You Begin:
- Unpack all components and verify against the parts list provided in your package.
- Ensure you have adequate space for assembly.
- Keep small parts away from children during assembly.
Assembly Steps (General Guidance):
- Prepare the Frame: Begin by connecting the main side rails and end rails to form the rectangular base of the bed frame. Secure them using the provided hardware.
- Install Slats: Place the wooden slats across the frame, ensuring they are evenly spaced and securely fastened to provide proper mattress support.
- Attach Fence Railings: Secure the fence railings to the perimeter of the bed frame. These railings provide a protective barrier.
- Install the Door: Attach the small door to the designated opening in the fence railing, ensuring it swings freely and the latch mechanism functions correctly.
- Final Check: Once assembled, double-check all connections to ensure they are tight and secure.


Operating Instructions
The Mirightone Full Size Floor Bed is designed for ease of use and to support a child's developmental independence.
Using the Bed:
- Mattress Placement: Place a full-size mattress (recommended thickness 6 inches or less) directly onto the wooden slats. No box spring is needed.
- Door Functionality: The small door can be opened and closed to allow easy access for your child. Ensure the latch is securely closed when the child is sleeping to maintain a safe enclosure.
- Promoting Independence: The low height of the bed allows children to get in and out independently, fostering a sense of autonomy.
- Playhouse Feature: The bed's design with fence railings and a door can also serve as a playhouse, encouraging imaginative play within a safe space.


Maintenance
Proper care and maintenance will extend the life and appearance of your Mirightone Floor Bed.
Cleaning:
- Wipe down the wooden surfaces with a soft, damp cloth.
- Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the finish.
- For spills, blot immediately with a clean, dry cloth.
General Care:
- Periodically check all screws and bolts to ensure they remain tight. Re-tighten as necessary to maintain stability and safety.
- Avoid dragging the bed when moving it; always lift to prevent damage to the frame and floor.
- Keep the bed away from direct sunlight and extreme temperature changes to prevent warping or fading of the wood.
Troubleshooting
If you encounter any issues with your Mirightone Floor Bed, refer to the following common solutions:
Common Issues and Solutions:
- Squeaking Noises:
Solution: Squeaking often indicates loose connections. Re-tighten all screws and bolts on the bed frame. Ensure the mattress is properly seated on the slats. - Instability/Wobbling:
Solution: Check that all frame components are correctly aligned and securely fastened. Ensure the bed is on a flat, even surface. - Door Not Latching Properly:
Solution: Inspect the latch mechanism for any obstructions or misalignment. Ensure the door hinges are securely attached and the door swings freely without binding. - Damaged or Missing Parts:
Solution: If any parts are missing or damaged upon arrival or during assembly, please contact Mirightone customer support immediately for assistance.
Warranty Information
The Mirightone Full Size Floor Bed comes with a one-year product warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage resulting from misuse, accidents, unauthorized repairs, or normal wear and tear.
Please retain your proof of purchase for any warranty claims.
Customer Support
For any questions, concerns, or assistance with your Mirightone Full Size Floor Bed, please do not hesitate to contact our customer service team.
We are committed to providing prompt and detailed solutions to address your concerns. Expect a response within 7-24 hours. Our goal is to ensure your complete satisfaction.
If you experience any missing or damaged parts during shipping or assembly, please contact us directly for immediate assistance.