Vente-unique ZEVARA 80 cm Suspended Bathroom Furniture Set Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your Vente-unique ZEVARA 80 cm Suspended Bathroom Furniture Set. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Image: Complete ZEVARA bathroom furniture set, including the vanity unit, countertop basin, and tall column cabinet, installed in a modern bathroom setting.

Safety Information

• Always ensure all components are present and undamaged before assembly. Do not proceed with assembly if any parts are missing or damaged.
• Assembly should be performed by at least two adults to prevent injury and ensure proper handling of large components.
• Use appropriate tools as specified in the assembly instructions. Do not overtighten screws, as this may damage the material.
• Ensure the wall where the furniture will be mounted is structurally sound and capable of supporting the weight of the unit and its contents. Use appropriate wall fixings for your wall type (not always included).
• Keep small parts and packaging materials away from children to prevent choking hazards.
• For basin installation, ensure all plumbing connections are secure and watertight to prevent leaks. It is recommended to use a low-profile siphon for compatibility with the vanity unit.

Package Contents

Verify that all the following components are included in your package:

• 1 x ZEVARA Suspended Vanity Unit (80 cm)
• 1 x VERINI Countertop Basin (Ceramic)
• 1 x ZEVARA Suspended Column Unit
• 3 x Handle Kits (Matte Black, Glossy Chrome, Gold)
• Assembly Hardware (screws, dowels, etc.)

Image: The ZEVARA vanity unit with a white countertop basin and the matching tall column unit, showcasing their natural light finish and fluted design.

Setup and Assembly

This furniture set requires self-assembly. Follow the steps below carefully. It is recommended to lay out all parts on a clean, soft surface to prevent scratches.

Tools Required:

• Screwdriver (Phillips head)
• Drill (for wall mounting)
• Level
• Measuring Tape
• Pencil
• Safety Glasses

Assembly Steps:

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Refer to the included assembly diagram (if provided separately) to identify each part.
2. Assemble Vanity Unit: Follow the specific instructions for assembling the main vanity cabinet structure. Ensure all connections are secure.
3. Install Drawers: Assemble the two drawers and install the soft-close drawer slides according to the instructions. Insert the drawers into the vanity unit.
4. Attach Handles: Choose your preferred handle color (matte black, glossy chrome, or gold) and attach them to the drawers.
5. Mount Vanity Unit to Wall:
   • Determine the desired height and mark the drilling points on the wall using a level and pencil.
   • Drill pilot holes and insert appropriate wall anchors (not always included, choose based on wall material).
   • Securely attach the vanity unit to the wall using the provided mounting hardware. Ensure it is level and stable.
6. Install Countertop Basin:
   • Place the VERINI ceramic basin onto the top surface of the vanity unit.
   • Connect the plumbing, including the faucet (not included) and drain. Ensure a low-profile siphon is used for proper fit within the vanity.
   • Seal the basin to the vanity top with silicone sealant to prevent water ingress.
   

   Image: Close-up view of the VERINI white ceramic countertop basin, showing the faucet hole and drain opening.

   

   Image: Technical drawing with dimensions of the VERINI countertop basin, indicating length, width, height, and drain diameter.
7. Assemble and Mount Column Unit:
   • Assemble the ZEVARA column unit structure and install any internal shelves.
   • Similar to the vanity, mark and drill holes for wall mounting the column unit.
   • Securely attach the column unit to the wall, ensuring it is level and stable.
   

   Image: Close-up view of the ZEVARA tall column unit, highlighting its fluted door and natural light finish.

Operating Instructions

Drawer Operation:

The vanity unit is equipped with two drawers featuring a soft-close mechanism. To operate, simply push the drawer gently to close, and the mechanism will engage to ensure a quiet and smooth closure.

Handle Customization:

Your ZEVARA set includes three different handle color kits: matte black, glossy chrome, and gold. You can easily change the handles to match your bathroom decor or personal preference. To change, unscrew the current handles and replace them with the desired color option.

Maintenance

General Care for Furniture (MDF):

• Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
• Immediately wipe up any spills to prevent water damage or staining.
• Avoid placing hot items directly on the furniture surface.
• Periodically check all screws and fittings to ensure they remain tight. Retighten if necessary.

Ceramic Basin Care:

• Clean the ceramic basin with mild soap and water. Rinse thoroughly and dry with a soft cloth to prevent water spots.
• Avoid using abrasive pads, scouring powders, or strong chemical cleaners, which can scratch or dull the ceramic surface.
• Regularly check plumbing connections for any signs of leaks.

Troubleshooting

Specifications

Warranty and Support

Warranty Information:

Specific warranty details for this product are not provided in the available product information. Please refer to your purchase documentation or contact Vente-unique directly for warranty terms and conditions. Information regarding spare parts availability is also not provided.

Customer Support:

For any questions, missing parts, or assistance with assembly or operation, please contact Vente-unique customer support. You can typically find contact information on the Vente-unique website or through your purchase platform.

Visit the official Vente-unique store: Vente-unique Store