HOMCOM PU Recliner with Footrest Instruction Manual

1. Introduction

Thank you for purchasing the HOMCOM PU Recliner with Footrest. This manual provides essential information for the safe assembly, operation, and maintenance of your new recliner. Please read all instructions carefully before use and retain this manual for future reference.

Safety Information

• MAXIMUM WEIGHT CAPACITY: 330 lbs. DO NOT EXCEED. Exceeding this limit may result in damage to the product or personal injury.
• ASSEMBLY REQUIRED. Ensure all parts are correctly assembled before use.
• KEEP FINGERS AND HANDS AWAY FROM MOVING PARTS when adjusting the reclining position or footrest to prevent pinching or injury.
• EXTENDED USE IN RECLINED POSITION may cause discomfort or injury if not used properly.
• Always follow assembly instructions and safety precautions provided in this manual.

2. Package Contents

Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

Figure 2.1: The recliner is typically shipped in one package.

Your package should include the main chair components, arm pads, and footrest components, along with necessary hardware and tools for assembly.

3. Setup and Assembly

Assembly of the HOMCOM PU Recliner is required. Please follow the included detailed assembly instructions provided in the box. Ensure you have adequate space and a clean, flat surface for assembly.

General Assembly Steps (Refer to included manual for detailed steps):

1. Unpack all components and verify against the parts list.
2. Attach the base to the main chair frame.
3. Secure the backrest to the seat frame.
4. Install the armrests, ensuring they are firmly attached.
5. Connect any reclining mechanisms or footrest components as per the specific instructions.
6. Tighten all bolts and screws securely, but do not overtighten.
7. Test the recliner's functions (recline, swivel, footrest) to ensure proper operation before full use.

Figure 3.1: Recliner dimensions for planning placement.

4. Operating Instructions

Reclining Function

The recliner allows for adjustment up to 135 degrees. To recline, apply gentle pressure to the backrest while seated. The chair will smoothly move into your desired position. To return to an upright position, lean forward slightly.

Figure 4.1: Reclining the chair up to 135 degrees.

Footrest Operation

The footrest extends when the chair is reclined. Simply recline the chair to activate the footrest. To retract the footrest, return the chair to its upright position.

Figure 4.2: Extending the footrest for leg support.

360° Swivel Base

The recliner features a 360-degree swivel base, allowing for effortless rotation. Simply push off the floor with your feet or use your hands on the armrests to rotate the chair in any direction.

Figure 4.3: Demonstrating the 360-degree swivel base.

5. Maintenance and Care

Cleaning

• The PU leather upholstery is designed for easy cleaning. Wipe the surface with a damp cloth to remove dust and spills.
• Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the upholstery.
• For stubborn stains, use a mild soap solution on a soft cloth, then wipe clean with a damp cloth and dry thoroughly.

General Care

• Periodically check all bolts and screws to ensure they remain tight. Retighten if necessary to maintain stability and safety.
• Avoid exposing the recliner to direct sunlight or extreme temperatures, which can cause the material to fade or crack over time.
• Keep sharp objects away from the upholstery to prevent punctures or tears.

6. Troubleshooting

Squeaking Noise During Swivel

If the chair produces a squeaking noise when swiveling, it may indicate that the swivel mechanism requires lubrication.

• Carefully tilt the chair to access the swivel base.
• Apply a small amount of silicone-based lubricant or a similar non-staining lubricant to the moving parts of the swivel mechanism.
• Rotate the chair several times to distribute the lubricant.
• If the squeaking persists, ensure all connections to the base are secure.

Difficulty Reclining or Extending Footrest

• Ensure there are no obstructions behind or in front of the chair that might impede its movement.
• Check that all assembly bolts are securely tightened but not overtightened, which could restrict movement.
• Verify that the reclining mechanism is free of debris.

7. Specifications

8. Warranty and Support

For warranty information, technical support, or to order replacement parts, please contact HOMCOM customer service. Refer to your purchase documentation for specific contact details or visit the official HOMCOM website.

Please have your model number (839-872V80CW) and purchase date available when contacting support.