Introduction
Thank you for choosing the Bedsure Electric Blanket. This manual provides essential information for the safe and effective use of your new electric blanket. Designed for comfort and warmth, this Full-size electric blanket (72x84 inches) features soft flannel and sherpa materials, offering customizable warmth with multiple heat and time settings. Please read these instructions carefully before use and retain them for future reference.
Image: The Bedsure Electric Blanket, folded, showcasing its soft texture and the attached digital controller.
Safety Information
Your safety is paramount. The Bedsure Electric Blanket has undergone rigorous testing to ensure reliable performance. It is ETL and FCC certified, and includes an 8-hour auto shut-off feature to prevent overheating.
- Do Not Fold or Bunch: Ensure the blanket is spread flat when in use to prevent concentrated heat and potential damage.
- Not Water Resistant: This blanket is not water resistant. Avoid contact with liquids.
- Supervision Required: Do not use with infants, children, incapacitated individuals, or persons insensitive to heat.
- Pet Safety: Do not allow pets on the blanket, as their claws can damage heating elements.
- Power Source: Designed for standard 120V AC wall outlets at 60Hz.
- Disconnect Before Cleaning: Always unplug the controller and power cord from the blanket and wall outlet before cleaning or storing.
Image: A user comfortably covered by the Bedsure Electric Blanket, with icons indicating ETL and FCC certifications, overheat protection, and an 8-hour auto shut-off feature.
Setup
Follow these steps to set up your Bedsure Electric Blanket:
- Unpack: Carefully remove the electric blanket and controller from its packaging.
- Inspect: Check the blanket and controller for any signs of damage. Do not use if damaged.
- Connect Controller: Locate the connector on the blanket and the corresponding plug on the controller cord. Firmly push the controller plug into the blanket connector until it clicks securely into place.
- Position Blanket: Lay the blanket flat on your bed, ensuring it is not folded, bunched, or tucked under the mattress. The controller cord should be positioned conveniently for access.
- Plug In: Plug the power cord from the controller into a standard 120V AC wall outlet.
Image: The Bedsure Electric Blanket spread out on a bed, showing the controller placed near the user for easy access.
Operating Instructions
Your Bedsure Electric Blanket features a user-friendly digital controller for adjusting warmth and time settings.
- Power On/Off: Press the power button on the controller to turn the blanket on or off. The digital display will illuminate when on.
- Adjust Heat Settings: Use the 'Heat' button to cycle through 6 heating levels. The current heat level will be displayed (e.g., '01' for lowest, '06' for highest).
- Set Time Settings: Use the 'Time' button to select from 10 time settings, in 1-hour intervals. This sets how long the blanket will remain on before automatically shutting off. The default auto shut-off is 8 hours.
- Pre-heating: For optimal warmth, it is recommended to turn on the blanket on a higher heat setting approximately 15-30 minutes before use.
Image: A detailed view of the Bedsure Electric Blanket's digital controller, highlighting the heat and time setting buttons and the clear display.
Maintenance
Proper care will extend the life of your Bedsure Electric Blanket. This blanket is machine washable.
- Pre-Wash: Disconnect the controller from the blanket and the wall outlet. Ensure all cords are detached.
- Washing: Machine wash on a gentle cycle with cold water. Do not bleach or dry clean.
- Rinsing: Rinse thoroughly.
- Drying: Tumble dry on low heat or line dry. Ensure the blanket is completely dry before reconnecting the controller or storing. Do not iron.
- Storage: Store the blanket in a cool, dry place. Avoid folding tightly or placing heavy objects on it, which could damage the internal wiring.
Troubleshooting
If you encounter issues with your Bedsure Electric Blanket, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blanket is not heating or unevenly heating. | Loose connection, blanket folded/bunched, power issue, internal wiring issue. | Ensure controller is securely plugged into blanket and wall outlet. Spread blanket flat. Check power outlet. If issue persists, contact customer support. (Note: Some users have reported uneven heating or heating going out in the middle after extended use.) |
| Controller feels warm. | Normal operation, especially on higher heat settings. | This can be normal. Ensure the controller is not covered or obstructed to allow for proper heat dissipation. If it becomes excessively hot or emits smoke/odor, immediately unplug and contact support. |
| Blanket automatically turns off. | Timer setting reached, auto shut-off activated, or safety feature triggered. | Check your selected time setting. The blanket has an 8-hour auto shut-off. If it turns off prematurely, ensure it is not folded or bunched, which could trigger overheat protection. |
If the problem persists after attempting these solutions, please contact Bedsure customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Name | BS-300B |
| Material | 100% Polyester (Flannel top, Sherpa bottom) |
| Color | 01 - Grey |
| Size | Full (72"L x 84"W) |
| Item Weight | 5.77 Pounds |
| Heating Levels | 6 |
| Time Settings | 10 (1-hour intervals) |
| Auto Shut-Off | 8 Hours (default) |
| Included Components | 1 Electric Blanket (72" x 84"), 1 Controller |
| Certifications | ETL, FCC |
| Care Instructions | Machine Wash |
Image: A diagram illustrating various sizes of Bedsure blankets, including Throw, Twin, Full, Queen, and King, with their respective dimensions.
Warranty and Support
Bedsure stands behind the quality of its products.
- Return Policy: This product is eligible for a refund or replacement within 30 days of purchase, in accordance with the seller's return policy.
- Customer Support: For any questions, concerns, or warranty claims beyond the return period, please contact Bedsure customer service directly. Refer to the product packaging or the Bedsure official website for contact information.
