Jugbow Dog Shock Collar User Manual

Introduction

This user manual provides comprehensive instructions for the safe and effective use of your Jugbow Dog Shock Collar. Designed for training dogs weighing 10-120 lbs, this system features a remote with a 4200FT range and two waterproof receiver collars, offering four distinct training modes to assist in correcting unwanted behaviors and reinforcing positive ones.

Please read this manual thoroughly before operating the device to ensure proper usage and the well-being of your pet.

Product Components

The Jugbow Dog Shock Collar package includes the following items:

• Remote Control Transmitter
• 2 x Receiver Collars (Green color, adjustable for neck sizes 7.8-24.4 inches)
• USB Charging Cable (3-in-1 design for simultaneous charging)
• Metal Prongs (short and long sets)
• Silicone Caps for Prongs
• Test Light Tool
• User Manual

Figure 1: Overview of the Jugbow Dog Shock Collar system, including the remote control and two receiver collars.

Key Features

• 4 Humanized Training Modes:
  • Beep Mode (1-8 levels): Audible tone for attention or mild correction.
  • Vibration Mode (1-16 levels): Gentle vibration for attention or moderate correction.
  • Safe Shock Mode (1-99 levels): Static stimulation for more firm correction.
  • Shock Boost (10% higher): Provides a slightly stronger static stimulation when needed.
  

  Figure 2: Visual representation of the four training modes available on the Jugbow Dog Shock Collar.

• Extended Range & Dual Channel:

  The remote control offers an impressive range of up to 4200 feet (approximately 1280 meters), ensuring reliable communication even in open outdoor environments. Its dual-channel design allows for simultaneous training of two dogs with a single remote, and it retains memory settings for convenience.

  

  Figure 3: The 4200ft remote range allows for effective training across large areas, supporting two dogs simultaneously.

• IPX7 Waterproof Receiver:

  The receiver collars are 100% IPX7 waterproof, making them suitable for use in various weather conditions, including rain, splashes, and even swimming. Note: The remote control is not waterproof.

  Play video

  Video 1: Demonstrates the waterproof capabilities of the Jugbow Dog Shock Collar receiver, highlighting its durability in wet conditions.

• Adjustable & Comfortable Fit:

  The soft nylon collar strap is two-way adjustable, fitting dogs weighing 10-120 lbs with neck sizes ranging from 7.8 to 24.4 inches. Its compact design ensures a comfortable fit for various breeds and sizes.

  

  Figure 4: The adjustable collar accommodates a wide range of dog sizes, from small to large breeds.

• Long Battery Life & Fast Charging:

  Equipped with upgraded technology, the system features a 3-in-1 fast charging cable that fully charges the devices in just 2 hours. The receiver collar offers up to 35 days of standby time, while the remote provides up to 45 days.

  

  Figure 5: The system boasts extended battery life for both the remote and receiver collars, minimizing charging frequency.

• Security ON/OFF Switch:

  The remote features an instant-response security on/off switch button, preventing accidental activation of training modes and ensuring safe handling.

  

  Figure 6: The security switch on the remote prevents unintended corrections during handling or storage.

Setup Guide

1. Charging the Device

Before first use, fully charge the remote control and receiver collars. Use the provided 3-in-1 USB charging cable. The indicator lights will show charging status.

2. Pairing the Second Collar (if applicable)

The collars are typically pre-paired from the factory. If you need to pair a second collar or re-pair a collar, follow these steps:

1. Ensure the second receiver collar is turned off.
2. Long-press the RX power button on the receiver until it enters pairing mode (the status light will rapidly blink).
3. On the remote, select the desired channel (e.g., Channel 2 for the second collar) using the channel key.
4. Press any function key (Beep, Vibration, or Shock) on the remote for pairing. The receiver's status light will stop blinking once pairing is successful.

3. Attaching the Collar and Contact Points

Select the appropriate metal prongs (short for short-haired dogs, long for long-haired dogs) and attach them to the receiver. For added comfort and to prevent skin irritation, place the silicone caps over the prongs. Ensure the collar is snug but not too tight, allowing two fingers to fit comfortably between the collar and your dog's neck.

Important: It cannot be worn continuously for more than 12 hours without removing the metal prongs.