GIGABYTE GP-P550B

Download PDF
Contents

GIGABYTE GP-P550B 550W Power Supply

Product Instruction Manual

Introduction

This manual provides essential information for the installation, operation, and maintenance of your GIGABYTE GP-P550B 550W 80 Plus Bronze Power Supply. Please read this manual thoroughly before installation to ensure proper and safe usage of the product.

The GP-P550B is designed to empower your computer with reliable and efficient power. It features a single +12V rail, a 120mm hydraulic bearing fan for optimal cooling, and flat cables for improved airflow and cable management within your PC case. Rated 80 PLUS Bronze, it delivers up to 85% efficiency at typical loads, reducing power waste, heat, and fan noise.

Safety Information

Always observe the following safety precautions to prevent injury or damage to the product and connected components:

  • Ensure the power supply is disconnected from the AC outlet before installation or maintenance.
  • Do not open the power supply unit. High voltages are present inside, even when disconnected. There are no user-serviceable parts inside.
  • Install the power supply in a well-ventilated area, away from heat sources, direct sunlight, and moisture.
  • Use only the cables provided with the power supply.
  • Ensure all cables are securely connected to prevent loose connections and potential damage.
  • This product is designed for use with personal computers. Do not use it for other applications.

Package Contents

Verify that all items are present in the package:

  • GIGABYTE GP-P550B 550W Power Supply Unit
  • AC Power Cord
  • Mounting Screws
  • User Manual (this document)
Gigabyte GP-P550B Power Supply and its retail box

Image: The GIGABYTE GP-P550B power supply unit shown alongside its retail packaging.

Product Features

  • 550W Output Capacity: Provides stable and sufficient power for mainstream PC builds.
  • 80 PLUS Bronze Certified: Achieves up to 85% efficiency at 50% load, reducing energy consumption and heat generation.
  • Single +12V Rail: Delivers robust power output, stability, and compatibility for modern hardware, simplifying cable installation and supporting overclocking.
  • 120mm Hydraulic Bearing (HYB) Fan: Optimizes noise reduction and thermal performance. The fan speed adjusts automatically based on power detection, ensuring long-term stable operation.
  • Intel ATX 12V v2.31 Form Factor: Ensures broad compatibility with standard PC cases and motherboards.
  • Flat Cables: Designed to reduce clutter and improve airflow within the PC case, facilitating a cleaner build.
  • Comprehensive Protection: Includes Over Voltage Protection (OVP), Over Power Protection (OPP), Short Circuit Protection (SCP), Under Voltage Protection (UVP), Over Current Protection (OCP), and Over Temperature Protection (OTP) for system safety.
Angled view of Gigabyte GP-P550B Power Supply

Image: An angled view of the GIGABYTE GP-P550B power supply, highlighting its compact design and flat cables.

Top view of the 120mm Hydraulic Bearing fan on Gigabyte GP-P550B

Image: A close-up top view of the 120mm Hydraulic Bearing fan, designed for efficient cooling and quiet operation.

Setup and Installation

Follow these steps to install your GIGABYTE GP-P550B power supply:

  1. Prepare Your System:
    • Turn off your computer and disconnect the AC power cord from the wall outlet.
    • Open your computer case.
    • If replacing an existing PSU, disconnect all cables from the old power supply and remove it from the case.
  2. Mount the Power Supply:
    • Carefully slide the GP-P550B into the power supply bay of your computer case.
    • Align the screw holes on the PSU with those on the case.
    • Secure the power supply using the provided mounting screws.
  3. Connect Cables:

    Connect the necessary cables to your motherboard and components. The GP-P550B includes the following connectors:

    • 20+4 Pin Main Power Connector: Connect to your motherboard's main power socket.
    • 4+4 Pin CPU Power Connector: Connect to your motherboard's CPU power socket.
    • PCIe 6+2 Pin Connectors (x2): Connect to your graphics card(s).
    • SATA Power Connectors (x6): Connect to SATA hard drives, SSDs, and optical drives.
    • 4-Pin Peripheral (Molex) Connectors (x3): Connect to older peripherals or case fans.
    • 4-Pin Floppy Connector (x1): For legacy floppy drives (if applicable).

    Ensure all connections are firm and properly seated. Utilize the flat cables for efficient cable management, routing them behind the motherboard tray if your case allows.

  4. Close Case and Connect AC Power:
    • Once all connections are made, close your computer case.
    • Connect the AC power cord to the power supply's inlet and then to a wall outlet.
  5. Power On:
    • Flip the power switch on the back of the PSU to the "I" (On) position.
    • You can now power on your computer.
Rear view of Gigabyte GP-P550B Power Supply showing power inlet and switch

Image: The rear panel of the GIGABYTE GP-P550B, showing the AC power inlet and the main power switch.

Angled view of Gigabyte GP-P550B Power Supply with cables

Image: An angled view of the GIGABYTE GP-P550B, illustrating the attached flat cables for various component connections.

Operating Instructions

The GIGABYTE GP-P550B power supply operates automatically once installed and connected. The 120mm Hydraulic Bearing fan adjusts its speed based on the power supply's temperature and load, ensuring optimal cooling while minimizing noise.

To power on your system, ensure the PSU's main switch is in the "I" (On) position, then press your computer's power button. To power off, shut down your operating system normally. For complete power disconnection, flip the PSU's main switch to the "O" (Off) position and unplug the AC power cord.

Maintenance

Proper maintenance can extend the lifespan of your power supply:

  • Dust Removal: Periodically clean dust from the power supply's fan and ventilation grilles using compressed air. Ensure the system is powered off and unplugged before cleaning.
  • Environmental Conditions: Operate the power supply within recommended temperature and humidity ranges. Avoid extreme conditions.
  • Cable Management: Ensure cables are neatly routed and do not obstruct airflow within the PC case.

Troubleshooting

If you encounter issues with your GIGABYTE GP-P550B power supply, consider the following:

  • No Power:
    • Check if the AC power cord is securely connected to both the PSU and the wall outlet.
    • Ensure the power switch on the back of the PSU is in the "I" (On) position.
    • Verify that the main 20+4 pin and CPU 4+4 pin power connectors are firmly seated on the motherboard.
    • Test the wall outlet with another device to ensure it has power.
  • System Instability/Random Shutdowns:
    • Ensure all power connectors to components (graphics card, drives) are secure.
    • Check for proper ventilation within the PC case. Overheating can cause instability.
    • The GP-P550B has built-in protections (OVP, OPP, SCP, UVP, OCP, OTP) that will shut down the PSU if an electrical anomaly is detected. If this occurs, disconnect power, wait a few minutes, and re-check all connections before attempting to power on again. If the issue persists, it may indicate a component fault or an overloaded system.
  • Fan Noise:
    • A certain level of fan noise is normal, especially under load.
    • If the noise is excessive or unusual, check for dust accumulation on the fan blades and clear any obstructions.

If troubleshooting steps do not resolve the issue, please contact GIGABYTE customer support or your retailer for further assistance.

Specifications

Gigabyte GP-P550B Power Supply with specification label

Image: The GIGABYTE GP-P550B power supply unit, showing its detailed specification label.

FeatureDetail
ModelGP-P550B
Total Wattage550 W
Efficiency80 PLUS Bronze (85% at typical load)
Form FactorIntel ATX 12V v2.31
PFCActive PFC (>0.9 typical)
Input Voltage100-240 Vac (full range)
Input Current8-4 A
Input Frequency60-50 Hz
Fan Type120mm Hydraulic Bearing (HYB) Fan
MTBF>100,000 hours
ProtectionOVP/OPP/SCP/UVP/OCP/OTP
Dimensions (LxWxH)5.9 x 5.5 x 3.4 inches (150 x 140 x 86 mm)
Item Weight3.08 pounds
Dimensions diagram of Gigabyte GP-P550B Power Supply

Image: A diagram illustrating the dimensions of the GIGABYTE GP-P550B power supply unit.

Warranty and Support

GIGABYTE products are manufactured to the highest quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official GIGABYTE website.

For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact GIGABYTE customer support through their official website or the contact information provided in your product's packaging.

You can visit the official GIGABYTE store for more information: GIGABYTE Store on Amazon.

© 2024 GIGABYTE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.