1. Introduction
This manual provides essential information for the proper setup, operation, and maintenance of your Carrera GO Wireless Speed Controller, Model 20061677. Please read these instructions carefully before using the product to ensure safe and optimal performance. This controller is designed for use with Carrera GO, GO Plus, and GO Battery Operated slot car racing systems.
Figure 1: Front view of the Carrera GO Wireless Speed Controller. This image displays the ergonomic design of the red and black controller, highlighting its trigger and control button.
2. Package Contents
Upon opening the package, verify that all components are present and undamaged. The standard package for Model 20061677 includes:
- 1x Carrera GO Wireless Speed Controller (Model 20061677)
- 1x Instruction Manual (this document)
Note: 1x 1.5V AAA battery is required for operation and is not included in the package.
Figure 2: Packaging of the Carrera GO Wireless Speed Controller. The box clearly indicates "Wireless Speed Controller" and the model number 20061677, along with the requirement for a 1.5V AAA battery.
3. Setup
3.1 Battery Installation
The Carrera GO Wireless Speed Controller requires one (1) 1.5V AAA battery for operation. Follow these steps to install the battery:
- Locate the battery compartment cover on the back of the controller.
- Using a small screwdriver (not included), carefully loosen the screw securing the battery compartment cover.
- Remove the cover.
- Insert one (1) 1.5V AAA battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
- Replace the battery compartment cover and tighten the screw to secure it.
Caution: Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. Dispose of used batteries responsibly.
3.2 Connecting to the Race Track System
Refer to your Carrera GO race track system's instruction manual for specific details on how to pair or connect wireless controllers. Generally, the process involves:
- Ensure your Carrera GO track system is powered on.
- Activate the pairing mode on your track's connection section (if applicable).
- Press and hold the designated pairing button on the wireless speed controller (refer to your track system manual for exact button location and procedure).
- A successful connection is usually indicated by an LED light on either the controller or the track system.
4. Operating Instructions
Once connected, the Carrera GO Wireless Speed Controller allows you to control your slot car on the track.
- Acceleration: Pull the trigger towards you to increase the speed of your slot car. The further you pull, the faster the car will go.
- Braking: Release the trigger to slow down or stop your slot car. Some track systems may have a dedicated brake button or a reverse trigger action; consult your track system manual for specific braking functionalities.
- Lane Change (if applicable): If your Carrera GO track system supports lane changes, a button on the controller (often located on the top or side) will activate this feature. Press the button while approaching a lane change section to switch lanes.
Practice is key to mastering control and achieving optimal lap times.
5. Maintenance
Proper maintenance ensures the longevity and performance of your wireless speed controller.
- Cleaning: Wipe the controller with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic.
- Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, remove the AAA battery to prevent leakage.
- Battery Replacement: Replace the battery when the controller's performance degrades or if the indicator light (if present) signals low power.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Controller not responding. |
|
|
| Car moves erratically or slowly. |
|
|
If problems persist after attempting these solutions, please contact Carrera customer support.
7. Specifications
- Model Number: 20061677
- Brand: Carrera
- Product Type: Wireless Speed Controller
- Compatibility: Carrera GO, GO Plus, GO Battery Operated track systems
- Power Source: 1x 1.5V AAA Battery (not included)
- Recommended Age: 6 years and up
- Product Dimensions: Approximately 6.69 x 17.72 x 3.54 inches (17 x 45 x 9 cm)
- Item Weight: Approximately 1.9 ounces (54 grams)
- Languages Supported (Manual): English, French, German, Italian, Spanish
- Manufacturer: Carrera Toys GmbH
8. Safety Information
Please observe the following safety guidelines:
- This product is not suitable for children under 3 years due to small parts which may present a choking hazard.
- Always use under direct adult supervision.
- Do not expose the controller to water or excessive moisture.
- Do not attempt to disassemble or modify the controller. This will void the warranty and may cause damage.
- Ensure batteries are inserted with correct polarity. Remove exhausted batteries promptly.
9. Warranty and Support
Carrera products are manufactured to high-quality standards. For information regarding warranty terms and conditions, or for technical support, please visit the official Carrera website or contact their customer service department.
Official Carrera Website: www.carrera-toys.com
