Eleglide C1/C1ST

Download PDF
Contents

Eleglide C1/C1 ST Electric Trekking Bike User Manual

Model: C1/C1ST

Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Eleglide C1/C1 ST Electric Trekking Bike. Please read this manual thoroughly before your first ride and keep it for future reference.

Eleglide C1 ST Electric Trekking Bike

Figure 1: Eleglide C1 ST Electric Trekking Bike. This image shows the full bicycle from a side angle, highlighting its frame, wheels, and components.

Safety Guidelines

  • Always wear a helmet and appropriate safety gear when riding.
  • Familiarize yourself with local traffic laws and regulations for electric bicycles.
  • Perform a pre-ride inspection before each use, checking brakes, tires, and battery level.
  • Do not ride under the influence of alcohol or drugs.
  • Avoid riding in extreme weather conditions or on excessively rough terrain unless the bike is designed for it.

Setup and Assembly

Your Eleglide C1/C1 ST bike comes partially assembled. Follow these steps for final assembly and initial setup:

  1. Unpacking: Carefully remove all components from the packaging. Retain the packaging in case of return or warranty claims.
  2. Handlebar Installation: Attach the handlebar to the stem. Ensure it is centered and tightened securely. The adjustable stem allows for comfortable posture.
  3. Adjustable Multi-Angle Stem

    Figure 2: Adjustable Multi-Angle Stem. This image illustrates how the stem can be adjusted to change the angle and height of the handlebars for a customized riding position.

  4. Front Wheel Installation: Install the front wheel, ensuring the hydraulic disc brake caliper aligns correctly with the rotor. Secure the quick-release skewer or axle nuts.
  5. Hydraulic Disc Brakes

    Figure 3: Hydraulic Disc Brakes. A close-up view of the front hydraulic disc brake system, showing the caliper and rotor, which provide enhanced stopping power and control.

  6. Pedal Installation: Identify left (L) and right (R) pedals. Thread them into the crank arms. Note that the left pedal has a reverse thread. Tighten firmly.
  7. Seat Post and Saddle: Insert the seat post with the saddle into the frame. Adjust the height for comfortable pedaling, ensuring your leg has a slight bend at the bottom of the pedal stroke. Secure the quick-release clamp.
  8. Battery Installation and Charging: Insert the removable battery into its compartment. Fully charge the battery before first use. The battery can be charged on or off the bike.
  9. Removable Battery and User-Friendly Details

    Figure 4: Removable Battery and User-Friendly Details. This composite image highlights the removable battery, luggage rack, Selle Royal saddle, and sturdy mudguards, emphasizing convenience and durability.

  10. Tire Inflation: Inflate tires to the recommended pressure indicated on the tire sidewall.

Operating Instructions

Powering On/Off

  • To power on the bike, press and hold the power button on the LCD display.
  • To power off, press and hold the power button again.

LCD Display and Pedal Assist Levels

The intelligent LCD display provides real-time speed, distance, battery level, and allows you to switch between 5 pedal assist levels (PAS) and activate walk mode.

  • Use the '+' and '-' buttons on the display to cycle through the 5 pedal assist levels (12, 15, 18, 21, and 25 km/h).
  • To activate 6 km/h walk mode, refer to the specific instructions in the full manual (usually by holding the '-' button).

Gear Shifting

Your bike is equipped with a 7-speed derailleur system. Use the shifter on the handlebar to change gears according to terrain and desired speed. Shift smoothly to avoid strain on the drivetrain.

Braking

The hydraulic disc brakes offer superior stopping power. Apply both front and rear brakes simultaneously for effective and controlled stopping. Avoid sudden, hard braking, especially with the front brake only.

Hydraulic Suspension

The hydraulic suspension fork provides a smoother ride. It features a lockout function, allowing you to lock the suspension for efficient riding on flat roads and unlock it for comfort on bumpy paths.

Hydraulic Suspension with Lockout

Figure 5: Hydraulic Suspension with Lockout. This image shows the front fork with an inset highlighting the internal hydraulic suspension mechanism and its lockout feature for varied terrain.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your e-bike.

  • Battery Care:
    • Charge the battery regularly, even if not in use, to maintain its health.
    • Avoid completely draining the battery.
    • Store the battery in a cool, dry place.
  • Tires: Check tire pressure before each ride. Maintain recommended PSI for optimal performance and safety. Inspect tires for wear and damage.
  • Brakes: Regularly check brake pads for wear and ensure brake levers provide firm and responsive braking. Adjust or replace as needed.
  • Chain: Keep the chain clean and lubricated to ensure smooth gear changes and prevent premature wear.
  • General Cleaning: Clean the bike regularly with a damp cloth. Avoid high-pressure washing directly on electrical components.
  • Fasteners: Periodically check all bolts and nuts for tightness, especially on critical components like handlebars, wheels, and seat post.

Troubleshooting

Here are some common issues and their potential solutions:

ProblemPossible CauseSolution
Bike does not power on.Battery not charged, battery not properly seated, loose electrical connection.Charge battery, ensure battery is fully inserted, check connections.
Motor not assisting.Pedal assist level too low, battery low, sensor issue.Increase PAS level, charge battery, check for error codes on LCD.
Brakes feel spongy or weak.Air in hydraulic lines, worn brake pads.Bleed brake system (professional service recommended), replace brake pads.
Gears are not shifting smoothly.Derailleur misalignment, dirty chain, stretched cable.Adjust derailleur, clean and lubricate chain, replace cable if necessary.

For issues not listed here or if solutions do not resolve the problem, please contact customer support.

Specifications

FeatureDetail
ModelEleglide C1/C1ST
Motor250W Mid-Drive Brushless Motor, 70 Nm Torque
Max Speed25 km/h (15.5 mph)
Battery36V 14.5Ah (522Wh) Removable Lithium-ion
Max RangeUp to 150 km (93.2 miles) in assist mode
Tires27.5" x 2.25" CST Pneumatic Tires
Gears7-Speed Derailleur
BrakesHydraulic Disc Brakes
SuspensionHydraulic Suspension Fork with Lockout (100mm travel)
DisplayIntelligent LCD Display with USB Port
Frame MaterialAluminum
Recommended Height5'1" - 6'5" (155-190 cm)
Max Load264.5 lbs (120 kg)
Included ComponentsCharger
Eleglide C1 ST Dimensions and Recommended Heights

Figure 6: Eleglide C1 ST Dimensions and Recommended Heights. This diagram provides detailed measurements of the bicycle and recommended rider heights and maximum load capacity.

Warranty and Support

For any questions regarding your Eleglide C1/C1 ST Electric Trekking Bike, or if you encounter any issues with the product or its packaging upon receipt, please contact the seller directly. It is recommended to retain the original packaging for any potential returns or warranty claims.

Please refer to your purchase documentation for specific warranty terms and conditions provided by the seller.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.