Sourcefy DP24/12
Dual Output Battery Charger User Manual
Model: DP24/12
Brand: Sourcefy
1. Introduction
This manual provides essential information for the safe and efficient operation of your Sourcefy Dual Output Battery Charger, Model DP24/12. This intelligent high-frequency charger is designed to simultaneously charge your main battery and other batteries in series, offering fast and efficient charging for both fresh and saltwater applications. It incorporates exclusive technologies for optimized energy management.
Figure 1: Sourcefy Dual Output Battery Charger (Model DP24/12). This image shows the top view of the charger, featuring a ribbed aluminum casing for heat dissipation and two blue labels indicating the 24 Volt System and 12 Volt System outputs with charge status indicators.
2. Safety Information
Please read all safety instructions carefully before operating the charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Use the charger only in well-ventilated areas.
- Do not expose the charger to rain or excessive moisture.
- Ensure the charger is disconnected from the power source before making or breaking connections to the battery.
- Avoid charging non-rechargeable batteries.
- Keep out of reach of children.
- Do not operate the charger if it has received a sharp blow, been dropped, or otherwise damaged.
- Always wear eye protection and protective clothing when working with batteries.
3. Package Contents
Verify that all items are present in the package:
- Sourcefy Dual Output Battery Charger (Model DP24/12)
- AC Power Cord
- User Manual
4. Setup
- Placement: Place the charger on a stable, flat surface in a well-ventilated area, away from direct sunlight, heat sources, and flammable materials.
- Battery Connection:
- Identify the 12V and 24V output cables from the charger.
- Connect the 12V output cable to your 12V battery system, ensuring correct polarity (positive to positive, negative to negative).
- Connect the 24V output cable to your 24V battery system, ensuring correct polarity. This charger is designed to charge batteries in series simultaneously.
- Ensure all connections are secure and free from corrosion.
- Power Connection: Plug the AC power cord into the charger's input port, then plug the other end into a standard 100-240 VAC, 50/60 Hz wall outlet.
5. Operating Instructions
The Sourcefy Dual Output Battery Charger features intelligent charging technology. Once connected and powered on, it will automatically detect the battery status and begin the charging process.
- Charging Indicators: The charger is equipped with LED indicators for both the 12V and 24V systems, showing the charging status (e.g., charging, charged, fault). Refer to the labels on the charger for specific indicator meanings.
- Automatic Charging: The charger will automatically switch to maintenance mode once the batteries are fully charged, preventing overcharging.
- Disconnection: To disconnect, first unplug the AC power cord from the wall outlet, then disconnect the battery cables from the batteries.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your charger:
- Cleaning: Clean the charger's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Connections: Periodically check all cables and connections for wear, damage, or corrosion. Replace any damaged components immediately.
- Storage: When not in use, store the charger in a cool, dry place, away from direct sunlight and extreme temperatures.
- Ventilation: Ensure the ventilation fins are clear of dust and debris to maintain proper heat dissipation.
7. Troubleshooting
If you encounter issues with your charger, refer to the table below for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger not turning on | No power from outlet; Loose power cord connection; Faulty outlet. | Check power outlet with another device; Ensure power cord is securely plugged in; Try a different outlet. |
| Batteries not charging | Incorrect battery connection (polarity); Severely discharged battery; Damaged battery cables. | Verify correct polarity (+ to +, - to -); Check battery voltage (if too low, may require specialized recovery); Inspect and replace damaged cables. |
| Charger overheating | Poor ventilation; Obstruction of cooling fins; Overloaded charger. | Ensure adequate airflow around the charger; Clear any dust or debris from fins; Ensure battery capacity is within charger's specifications. |
If the problem persists after attempting these solutions, please contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | DP24/12 |
| Input Voltage | 100-240 VAC, 50/60 Hz, 8 amps (MAX) |
| Output A | 10A @ 12 VDC (for 6-cell batteries) |
| Output B | 15A @ 24 VDC (for 12-cell batteries) |
| Product Dimensions | 5 x 5 x 5 inches (approximate) |
| Manufacturer | Sourcefy |
| UPC | 704674796411 |
9. Warranty and Support
This Sourcefy product comes with a 6 Months Unlimited Warranty, ensuring it is made with the highest quality components available and is pressure and computer tested for consistent quality and unsurpassed reliability.
For technical support, warranty claims, or general inquiries, please contact Sourcefy customer service through the retailer where the product was purchased or visit the official Sourcefy website for contact information.
Please have your model number (DP24/12) and UPC (704674796411) ready when contacting support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.