Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your VIANIS Motion Sensor Outdoor Wall Light. Please read this manual thoroughly before installation and retain it for future reference.
Safety Information
- Always turn off the power at the main circuit breaker before installation or maintenance.
- Installation should be performed by a qualified electrician if you are unsure about the process.
- Ensure all wiring connections are secure and comply with local electrical codes.
- Do not exceed the maximum wattage for the bulb (100W incandescent or equivalent LED).
- This fixture is designed for outdoor use and is waterproof. However, avoid submerging it in water.
UL Certified: This product adheres to strict UL safety standards, ensuring high safety and performance criteria.
Package Contents
Verify that all components are present before beginning installation.
- VIANIS Motion Sensor Outdoor Wall Light Fixture
- Mounting Hardware
- Shade (pre-assembled)
- Instruction Manual
Note: Bulb is not included.
Specifications
| Feature | Detail |
|---|---|
| Brand | VIANIS |
| Model Name | VIANIS Motion Sensor Outdoor Light |
| Model Number | V81605 |
| Color | Black |
| Material | Aluminum, Glass |
| Product Dimensions | 7.54"L x 6.3"W x 13.88"H |
| Item Weight | 4.06 pounds |
| Power Source | Corded Electric |
| Bulb Base | E26 (Bulb not included) |
| Max Wattage | 100W (Incandescent), 6-8W (Dimmable LED recommended) |
| Special Features | Motion Sensor, Waterproof, Weather Resistant, Anti-Rust, Energy Efficient |
| Installation Type | Semi Flush Mount |
Setup and Installation
The VIANIS Motion Sensor Outdoor Wall Light is designed for quick and easy installation. No assembly of the main fixture is required.
Step 1: Prepare for Installation
- Turn off power at the circuit breaker.
- Ensure the mounting surface is clean and stable.
- Unpack the fixture and verify all parts are present.
Step 2: Mount the Fixture
Secure the mounting bracket to your electrical box using the provided hardware. Connect the electrical wires (black to black, white to white, ground to ground) and secure with wire nuts.
Image: The VIANIS outdoor wall light showing the mounting bracket and included hardware for installation.
Attach the light fixture to the mounting bracket, ensuring a snug fit against the wall.
Video: Official VIANIS Direct video demonstrating the installation of the motion sensor outdoor wall light.
Step 3: Install the Bulb
The fixture features an open bottom design for easy bulb replacement. Insert an E26 base bulb (not included) into the socket. Dimmable LED bulbs (6-8W) or incandescent bulbs (below 100W) are recommended.
Image: The E26 socket of the VIANIS outdoor light, illustrating compatibility with various bulb types.
Step 4: Restore Power
Once the fixture is securely mounted and the bulb is installed, turn the power back on at the circuit breaker.
Operating Instructions
Your VIANIS Motion Sensor Outdoor Wall Light features an upgraded motion sensor with four distinct working modes and adjustable settings.
Mode Selection (One-Key Switch)
Press the sensor button located on the top of the fixture to cycle through the modes. An indicator light will show the current mode:
- Red Light: DIM Mode - Stays at 30% brightness at night, illuminates to 100% brightness when motion is detected, then returns to 30% after motion ceases.
- Green Light: ECO Mode - Remains off at night, turns on to 100% brightness when motion is detected, then turns off after motion ceases.
- Blue Light: D2D Mode (Dusk to Dawn) - Stays at 100% brightness from dusk until dawn, regardless of motion.
- Indicator Light OFF: Override Mode - Keeps the light at 100% brightness all night (for 8 hours) and turns off at dawn. To activate, turn the light switch OFF and ON within 2 seconds.
Image: Visual representation of the DIM, ECO, and D2D modes with their respective indicator light colors.
Adjustable Settings
The sensor allows for customization of sensitivity, brightness, and lighting duration.
- Sensitivity Adjustment (SENS knob): Rotate the "SENS" knob to increase or decrease the motion detection range (up to 40 feet max).
- Lighting Duration Adjustment (TIME knob): Rotate the "TIME" knob to set how long the light stays on after motion is detected (from 20 seconds to 5 minutes). Point to "ON" for continuous light.
- Brightness Adjustment (Built-in Dimmer): In DIM mode standby, long-press the sensor button to adjust the brightness between 15% and 50%. This feature is compatible with dimmable bulbs only.
Image: Detailed view of the motion sensor's adjustable knobs for sensitivity, time, and the mode switch button.
Maintenance
- Cleaning: To clean the fixture, ensure power is off. Wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Bulb Replacement: Due to the open bottom design, bulb replacement is tool-free. Simply unscrew the old bulb and screw in a new E26 base bulb.
- Inspection: Periodically inspect the fixture for any signs of wear, damage, or loose connections.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, faulty bulb, incorrect wiring. | Check circuit breaker. Replace bulb. Verify wiring connections. |
| Motion sensor not detecting. | Sensitivity too low, obstruction, incorrect mode. | Adjust SENS knob. Clear obstructions. Ensure correct mode is selected. |
| Light stays on constantly. | Override mode active, continuous motion, TIME knob set to "ON". | Deactivate override mode (toggle switch). Check for constant motion. Adjust TIME knob. |
| Light flickers. | Incompatible bulb, loose connection. | Use recommended dimmable LED (6-8W) or incandescent (below 100W) bulbs. Check wiring. |
Warranty and Support
The VIANIS Motion Sensor Outdoor Wall Light comes with a limited warranty. For specific warranty details or technical support, please contact VIANIS customer service.
Customer Service: Refer to your purchase documentation or the VIANIS website for contact information.
Image: A badge indicating a 1-year guarantee for the product.
