VAKOLE VT4 Folding Electric Bike User Manual

1. Introduction and Safety Guidelines

Thank you for choosing the VAKOLE VT4 Folding Electric Bike. This manual provides essential information for the safe assembly, operation, and maintenance of your e-bike. Please read it thoroughly before your first ride and keep it for future reference.

Important Safety Information:

• Always wear a helmet and appropriate safety gear when riding.
• Familiarize yourself with local traffic laws and regulations.
• Perform a pre-ride inspection before each use, checking brakes, tires, and battery.
• Do not ride under the influence of alcohol or drugs.
• Avoid riding in adverse weather conditions or on slippery surfaces.
• Ensure the battery is securely locked in place before riding.

2. Product Components

The VAKOLE VT4 electric bike comes with the following main components:

• VAKOLE VT4 Electric Bike (main unit)
• 36V 13Ah Lithium-ion Battery (integrated into frame)
• Battery Charger
• Tool Kit for assembly and minor adjustments
• User Manual (this document)

3. Assembly and Initial Setup

Your VAKOLE VT4 electric bike comes partially assembled. Follow these steps to complete the setup:

3.1 Unpacking

1. Carefully remove the bike and all components from the packaging.
2. Remove all protective packaging materials.

3.2 Unfolding the Bike

1. Locate the main frame hinge and release the safety latch.
2. Unfold the frame until it locks into place. Secure the safety latch.
3. Raise the handlebar stem and secure its locking mechanism.
4. Adjust the handlebar height and angle for comfortable riding, then tighten.

3.3 Installing Pedals

1. Identify the left (L) and right (R) pedals.
2. The right pedal (R) threads clockwise into the crank arm.
3. The left pedal (L) threads counter-clockwise into the crank arm.
4. Tighten securely with the provided wrench.

3.4 Seat Post Adjustment

1. Open the quick-release lever on the seat post clamp.
2. Adjust the seat height so your feet can comfortably touch the ground when stopped, or for optimal pedaling efficiency.
3. Close the quick-release lever firmly to secure the seat post. Ensure it is tight enough to prevent the seat from rotating or slipping.

3.5 Battery Installation and Initial Charge

The 36V 13Ah battery is designed for easy removal and secure locking.

1. Insert the battery into its compartment on the frame.
2. Use the provided key to lock the battery in place. Remove the key before riding.
3. For the first use, fully charge the battery. Connect the charger to the battery charging port, then plug it into a standard wall outlet. The indicator light on the charger will change when fully charged.

4. Operating Your VAKOLE VT4 E-bike

4.1 Powering On/Off

Press and hold the power button on the control panel (usually located on the handlebar) to turn the bike's electrical system on or off.

4.2 Riding Modes

The VAKOLE VT4 offers 3 riding modes:

• Pedal Assist Mode (PAS): The motor provides assistance as you pedal. You can typically adjust the level of assistance (e.g., PAS 1-5) via the control panel. PAS-1 offers the longest range, up to 75 km.
• Full Electric Mode (Throttle): If equipped, use the throttle to propel the bike without pedaling. This mode consumes battery faster.
• Manual Mode: Ride the bike like a traditional bicycle without any motor assistance.

4.3 Gear Shifting

Your VT4 is equipped with a professional 7-speed manual transmission. Use the gear shifter on the handlebar to change gears according to terrain and desired speed. Lower gears are for climbing hills, higher gears for flat terrain and speed.

4.4 Braking System

The bike features reliable disc brakes on both front and rear wheels. Apply both brake levers simultaneously for effective and controlled stopping. Practice braking in a safe area to understand their response.

5. Maintenance and Care

Regular maintenance ensures the longevity and safe operation of your VAKOLE VT4 e-bike.

5.1 General Checks

• Tires: Check tire pressure before each ride. The 20x3.0" fat tires require specific pressure (refer to tire sidewall). Inspect for wear or damage.
• Brakes: Ensure brake levers are firm and responsive. Check brake pads for wear.
• Bolts and Fasteners: Periodically check all bolts, nuts, and quick-release levers for tightness.
• Chain: Keep the chain clean and lubricated for smooth gear changes.

5.2 Battery Care

• Charge the battery regularly, even if not in use, to maintain its health.
• Avoid completely draining the battery.
• Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
• Use only the original VAKOLE charger.

5.3 Cleaning

Clean your e-bike with a damp cloth and mild soap. Avoid using high-pressure washers directly on electrical components.

6. Troubleshooting

This section addresses common issues you might encounter with your VAKOLE VT4 e-bike.

7. Technical Specifications

Detailed specifications for the VAKOLE VT4 Folding Electric Bike:

8. Warranty and Support

Your VAKOLE VT4 electric bike includes a charger, a tool kit, and this user manual. For specific warranty details, please refer to the documentation provided with your purchase or contact VAKOLE customer support. Keep your proof of purchase for warranty claims.

For technical assistance or spare parts, please contact the retailer or VAKOLE directly through their official channels.