1. Safety Information
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or even fatal. Keep these instructions for future reference.
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Use only UL/ETL listed wire for connections.
- Ensure all electrical connections are secure and comply with local codes and ordinances.
- Do not install near flammable materials or in areas with explosive atmospheres.
- This fixture is rated IP65 for outdoor use, providing protection against dust and water jets.
2. Package Contents
Verify that all components are present before beginning installation:
- LED Integrated Wall Sconce (2 units for 2-pack)
- 3 Color Temperature Switch (integrated)
- Mounting Hardware (screws, wire nuts)
3. Product Specifications
| Model Number | LR40346 |
| Brand | LUXRITE |
| Power Source | Hardwired |
| Voltage | 120 Volts |
| Wattage | 15 Watts |
| Brightness | 1500 Lumens |
| Color Temperature | 3000K / 4000K / 5000K Selectable |
| Material | Aluminum |
| Dimensions (L x W x H) | 5.5" x 4.75" x 5.87" |
| Water Resistance Level | IP65 Waterproof |
| Certifications | ETL Listed |
| Lifespan | Up to 50,000 hours |
Image: Product dimensions showing 5.5 inches length, 4.75 inches width, and 5.87 inches height.
4. Setup and Installation
This fixture is designed for hardwired installation. No assembly is required for the light fixture itself. Ensure power is disconnected at the circuit breaker before proceeding.
- Prepare Wiring: Turn off power at the main circuit breaker. Ensure the wall box is clean and ready for installation.
- Mounting Plate: Attach the mounting plate to the junction box using the provided screws. Ensure it is securely fastened.
- Electrical Connections:
- Connect the black wire from the fixture to the black (Live) wire from the junction box.
- Connect the white wire from the fixture to the white (Neutral) wire from the junction box.
- Connect the green or bare copper wire from the fixture to the green or bare copper (Ground) wire from the junction box.
- Secure all connections with wire nuts.
- Fixture Orientation: Decide whether you want the light to shine up or down. The fixture can be installed in either orientation.
- Secure Fixture: Carefully tuck all wires into the junction box. Align the fixture with the mounting plate and secure it using the provided screws.
- Restore Power: Turn the power back on at the circuit breaker.
Image: Close-up of the light fixture's interior, showing the mounting plate and internal wiring connections (GND, L, N).
Image: Two examples of the cube wall light installed on an exterior wall, one demonstrating light shining upwards and the other downwards.
5. Operation
The LUXRITE LED Outdoor Cube Wall Light features a 3-color temperature selectable switch, allowing you to choose between three distinct light outputs.
5.1. Selecting Color Temperature (CCT)
Before final installation, or if you need to change the color temperature, locate the CCT switch on the back of the fixture. This switch allows you to select one of three color temperatures:
- 3000K: Soft White (Warm, inviting light)
- 4000K: Cool White (Neutral, balanced light)
- 5000K: Bright White (Daylight-like, crisp light)
Adjust the switch to your desired setting. Once set, the fixture will emit light at the chosen color temperature when powered on.
Image: A visual comparison of the light output at 3000K (soft white), 4000K (cool white), and 5000K (bright white) from the wall light.
6. Maintenance
The LUXRITE LED Outdoor Cube Wall Light is designed for low maintenance and durability. Its aluminum construction and IP65 rating ensure resistance to corrosion and weather.
6.1. Cleaning
- Ensure power is off before cleaning the fixture.
- Wipe the fixture with a soft, damp cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Avoid spraying water directly onto the fixture, despite its waterproof rating, to prevent potential damage to electrical connections over time.
6.2. Weather Resistance
The IP65 rating signifies that the fixture is protected against dust ingress and low-pressure water jets from any direction. This makes it suitable for outdoor environments, including porches, patios, and garages.
Image: The outdoor wall light shown with water droplets, emphasizing its IP65 waterproof and weather-resistant features.
7. Troubleshooting
If you experience issues with your LUXRITE LED Outdoor Cube Wall Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wiring connection. Faulty fixture. | Check circuit breaker and wall switch. Turn off power, check all wire connections. Contact customer support if wiring is correct and power is present. |
| Light flickers or dims. | Unstable power supply. Loose wiring connection. | Ensure stable power. Turn off power, check all wire connections. |
| Incorrect color temperature. | CCT switch set incorrectly. | Turn off power, access the CCT switch on the back of the fixture, and adjust to the desired setting (3000K, 4000K, or 5000K). |
8. Warranty and Support
This LUXRITE LED Outdoor Cube Wall Light (Model LR40346) is backed by a 5-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact LUXRITE customer service. Please have your model number (LR40346) and proof of purchase available when contacting support.
Contact information for LUXRITE can typically be found on the manufacturer's website or on your purchase receipt.
