1. Introduction
Thank you for choosing the Amico 36-inch Ceiling Fan with Light. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new ceiling fan. Please read it thoroughly before installation and keep it for future reference.
This modern ceiling fan is designed for both indoor and outdoor (damp rated) use, featuring a reversible DC motor, customizable light with 3 CCT options and dimming, and a quiet operation. It comes with a remote control for convenient operation.
2. Safety Instructions
WARNING: To reduce the risk of fire, electric shock, or personal injury, always follow these safety guidelines.
- Always turn off power at the main circuit breaker before installation or maintenance.
- Ensure all electrical connections comply with local codes and ordinances.
- Consult a qualified electrician if you are unsure about wiring.
- Mount the fan directly to a structural ceiling joist or an outlet box marked "Acceptable for Fan Support of 35 lbs (15.9 kg) or less."
- Do not bend the blade holders during installation or cleaning.
- Keep hands, tools, and other objects clear of the fan blades when in operation.
- Do not use a dimmer switch or fan's gear switch with this product. Use only the provided remote control.
- This fan is damp rated; however, avoid direct exposure to rain when installed outdoors.
3. Package Contents
Verify that all components are present before beginning installation.
- Ceiling Fan Unit (Motor, Housing)
- Fan Blades (3) - Reversible (White/Yellow Wood Grain)
- LED Light Kit
- Remote Control
- Mounting Hardware (Bracket, Screws, Wire Nuts)
- Instruction Manual
Image: Main components of the Amico 36-inch Ceiling Fan, including the fan unit, remote control, and reversible fan blades (white and yellow wood grain sides shown).
4. Specifications
| Feature | Detail |
|---|---|
| Model Number | KDM36PLY3B03R1-1 |
| Size | 36 inch |
| Color | White (with reversible blades: White/Yellow Wood Grain) |
| Material | Engineered Wood (Blades), Acrylonitrile Butadiene Styrene (Shade) |
| Motor Type | Reversible DC Motor |
| Fan Speeds | 6 Levels |
| Light Source | Integrated LED (Replaceable LED Light Kit) |
| Brightness | 200 - 2000 Lumens (Dimmable 10%-100%) |
| Color Temperature | 3000K (Warm White), 4000K (Neutral White), 6000K (Cool White) |
| Control Method | Remote Control |
| Timer Settings | 1, 2, 4 Hours |
| Noise Level | Low to 35dB |
| Indoor/Outdoor Use | Indoor, Outdoor (Damp Rated - avoid direct rain) |
| Voltage | 120 Volts |
| Wattage | 35 Watts |
| Product Dimensions | 36"L x 36"W x 12"H |
| Item Weight | 8.49 Pounds |
Image: Overview of the Amico 36-inch Ceiling Fan highlighting its dimensions, customizable light, 6-speed adjustable fan, super quiet operation, 1/2/4 hour timer setting, reversible DC motor, and two available blade colors.
5. Setup and Installation
This section provides a general overview of the installation process. For detailed step-by-step instructions, please refer to the dedicated installation manual included in your package. Amico also provides installation videos to assist you.
5.1 Pre-Installation Checklist
- Ensure power is OFF at the circuit breaker.
- Confirm you have all necessary tools (screwdriver, wire strippers, ladder, etc.).
- Verify the mounting location can support the fan's weight (minimum 35 lbs).
5.2 Installation Steps (Overview)
- Mounting Bracket Installation: Secure the mounting bracket to the ceiling outlet box.
- Wiring Connections: Connect the fan's electrical wires to the household wiring according to the wiring diagram in the detailed manual. Ensure all connections are secure.
- Fan Assembly: Attach the fan motor assembly to the mounting bracket.
- Blade Installation: Secure the fan blades to the motor housing. Note that the blades are reversible, offering a white or yellow wood grain finish.
- Light Kit Installation: Connect and secure the LED light kit to the fan assembly.
- Remote Control Pairing: Follow the instructions in the detailed manual to pair the remote control with the fan.
Image: A visual representation encouraging self-installation of the fan, highlighting the availability of an installation manual and video, and the benefits of fulfillment and saving on electrician fees.
Image: Detailed dimensions of the 36-inch Amico ceiling fan, including height and blade length, along with an illustration of the reversible white and wood grain blade options.
6. Operating Instructions
Your Amico ceiling fan is controlled by the included remote control, offering a range of functions for optimal comfort and lighting.
6.1 Remote Control Functions
Image: The remote control for the Amico ceiling fan, illustrating its use and the possibility of mounting it as a wall switch. Contact support if a replacement remote is needed.
- Power On/Off: Press the power button to turn the fan and light on or off.
- Fan Speed Adjustment: Use the speed buttons (1-6) to select your desired fan speed.
Image: Visual guide to the 6 adjustable fan speeds: Levels 1-2 for low comfortable wind, Levels 3-4 for medium natural wind, and Levels 5-6 for high cooling wind.
- Light Control:
- Brightness Adjustment: Use the dimming buttons to adjust light brightness from 10% to 100%.
- Color Temperature Change: Cycle through 3000K (Warm White), 4000K (Neutral White), and 6000K (Cool White) by pressing the light color temperature button.
Image: Illustration of the customizable light feature, showing dimmable range from 200LM to 2000LM (10%-100%) and three color temperature options: 3000K, 4000K, and 6000K.
- Memory Function: The fan remembers your last light brightness and color temperature settings if the light is turned off for at least 10 seconds. The fan speed setting is also remembered.
Image: Step-by-step guide to the memory function: select desired settings, turn off light for 10+ seconds, then turn on to recall settings. Note: turning on within 10 seconds will switch color temperature.
- Timer Setting: Set the fan to automatically turn off after 1, 2, or 4 hours.
Image: A visual representation of the timer setting feature, allowing the user to set the fan to turn off after 1, 2, or 4 hours, promoting a gentle breeze for sleep.
- Reversible DC Motor: Change the direction of the fan blades to optimize air circulation for summer cooling or winter heat distribution.
Image: Comparison showing the fan's reversible DC motor function: pushing air down for cooling in summer and pulling air up for heat distribution in winter, controlled by the remote.
6.2 Wall Switch Compatibility
The fan is compatible with conventional wall switches for basic on/off control of both fan and light. DO NOT connect the fan to a dimmer switch or a fan's gear switch, as this can damage the unit.
Image: Illustration demonstrating that the fan is suitable for conventional on/off wall switches but explicitly warns against connecting it to dimmer switches or fan gear switches.
7. Maintenance
Regular maintenance will ensure the longevity and optimal performance of your Amico ceiling fan.
- Cleaning: Clean the fan and light fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning.
- Blade Cleaning: Wipe fan blades gently to remove dust. Do not bend the blades.
- Tightening Screws: Periodically check and tighten all screws on the fan and mounting hardware to ensure secure operation.
- LED Light Kit: The integrated LED light kit is replaceable. If replacement is needed, contact Amico customer support for assistance.
8. Troubleshooting
If you encounter issues with your ceiling fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power to the fan; Loose wire connections; Remote control not paired or battery low. | Check circuit breaker; Verify all wire connections are secure; Replace remote battery or re-pair remote. |
| Fan wobbles | Loose blade screws; Unbalanced blades; Loose mounting bracket. | Tighten all blade screws; Check for bent blades and replace if necessary; Ensure mounting bracket is securely fastened. |
| Light does not work | Loose wire connection to light kit; Faulty LED light kit; Remote control issue. | Check light kit wiring; Contact customer support for LED light kit replacement; Check remote battery. |
| Remote control not working | Low or dead battery; Remote not paired; Obstruction between remote and receiver. | Replace battery; Re-pair remote control (refer to detailed manual); Ensure clear line of sight. |
| Excessive noise | Loose screws; Motor issue; Blades hitting an obstruction. | Tighten all screws; Ensure no obstructions are near blades; If noise persists, contact customer support. |
If the problem persists after attempting these solutions, please contact Amico customer support.
9. Warranty and Support
Amico stands behind the quality of its products.
- Motor Warranty: 10 years
- Other Parts Warranty: 2 years (including LED light board and remote control)
For any issues during use or installation, or if your LED light board or remote control are damaged or lost, please contact us. We provide 24-hour technical support and a 24-month worry-free warranty for every customer.
Image: Information on Amico's professional after-sales support, including 24-hour customer service and a 2-year warranty on parts, with a visual of included components like LED light board, lampshade, fan blade, controller, and remote.
