iliD Smart Bidet Toilet Seat Instruction Manual

1. Introduction

Thank you for choosing the iliD Smart Bidet Toilet Seat. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new bidet seat. Please read it thoroughly before use and retain it for future reference. Our smart bidet seat is designed to enhance your personal hygiene and comfort with advanced features and a user-friendly design.

2. Safety Information

Always adhere to the following safety guidelines to prevent injury or damage to the product:

• Ensure the bidet seat is connected to a grounded electrical outlet.
• Do not immerse the product in water or spray water directly onto electrical components.
• Disconnect power before performing any maintenance or cleaning.
• Do not attempt to repair the unit yourself. Contact qualified service personnel.
• Keep the product away from open flames or excessive heat.
• Ensure proper water pressure and temperature settings to avoid scalding or discomfort.

3. Package Contents

Verify that all components are present in the package:

• iliD Smart Bidet Toilet Seat
• Mounting Plate
• Mounting Screws and Anchors
• Wireless Remote Control (with 2 AAA Batteries)
• T-Valve (15/16", 15/16", 1/2")
• Cold Water Hose
• Plumbing Tape
• Spanner
• Installation Template

Image: All components included with the iliD Smart Bidet Toilet Seat for installation.

4. Product Overview & Features

The iliD Smart Bidet Toilet Seat offers a range of features designed for optimal comfort and hygiene:

• Instant Warm Water and Adjustable Comfort: Experience instant and limitless warm water and the convenience of a 3-level, enhancing toilet bidet featuring adjustable warm air drying. Tailor your experience with adjustable water temperature and pressure settings for gentle and smooth cleaning. The warm air drying system ensures you feel fresh and dry, providing a soft and soothing wash that is ideal for sensitive skin, offering superior comfort and hygiene.
• Thorough and Sanitary Cleaning: Featuring a self-cleaning, full stainless steel nozzle, this bidet ensures meticulous hygiene with a thorough cleaning experience. It promises optimum and thorough cleanliness, upholding the highest standards of hygiene for a refreshing and confident feeling after each use.
• Opulent and Ergonomic Design: Revel in the luxury of a heated seat with a 3-level adjustable temperature. The 3D streamlined design fits perfectly to the body's contours, providing a comfortable and luxurious experience. The streamlined, compact design, softly closing lid, and whisper-quiet functionality of the bidet, enhance the elegance of your bathroom.
• Flexible Cleaning Choices: Enjoy the flexibility and effectiveness of various cleaning modes, ensuring thorough hygiene and optimal comfort with every use.
• Energy-Saving Mode: The system gradually increases the temperature when it detects a person, ensuring optimal energy efficiency.
• Soft Ring Light: A minimalist and technologically advanced knob design that provides a convenient and sophisticated user experience.

Image: The iliD Smart Bidet Toilet Seat, highlighting its sleek design and remote control.

Image: Air Soft Bead Technology provides foamy droplets for a softer wash. Various modes like Power Wash, Feminine Wash, Child Wash, and Rear Wash are available with adjustable position and pressure.

Image: Features a constant temperature ceramic heating system and a self-cleaning, full stainless steel nozzle with triple independent waterway design for Rear Wash, Front/Feminine Wash, and Power Wash.

Image: Customize your experience with adjustable water temperature, a 3-level warm air dryer (90°F/95°F/100°F), and a 3-level heated seat (90°F/95°F/100°F).

Image: A visual guide to operating the bidet functions, including water and seat temperature adjustments, wash modes (Rear, Front), stop, and dryer. Also highlights the Soft Ring Light on the side knob.

Image: The wireless remote control provides comprehensive control over all bidet functions, including silent mode, night light, rear/front wash, nozzle cleaning, water/seat/wind temperature, and pressure adjustments.

5. Setup & Installation

The iliD Smart Bidet Toilet Seat is designed for easy installation. Follow these steps for a quick setup:

1. Remove your existing toilet seat.
2. Install the rubber anchors into the toilet bowl holes.
3. Place the provided template on the toilet bowl to align the mounting plate correctly.
4. Position the mounting plate over the template and insert the mounting screws.
5. Secure the mounting plate by tightening the screws.
6. Remove the template.
7. Attach the bidet seat to the secured mounting plate by sliding it into place until it clicks.
8. Connect the T-valve to your toilet's water supply line.
9. Connect the bidet's water hose to the T-valve.
10. Plug the bidet seat into a grounded electrical outlet.

Note: This bidet seat is specifically designed for elongated toilets. Please measure your toilet to ensure it is 18"-20" long to fit this model. If the T-valve size doesn't seem quite right during installation, please reach out to our customer support team for a 3/8” T-valve replacement.

6. Operating Instructions

Your iliD Smart Bidet Toilet Seat can be operated using the side knob or the wireless remote control:

Side Knob Controls:

• Rotate the knob forward for Rear Wash.
• Rotate the knob backward for Front Wash.
• Press the knob once to STOP operation or enter pause mode.
• Press the knob twice to enter DRYER mode.
• The Soft Ring Light illuminates the toilet bowl for convenience in low light.

Wireless Remote Control Functions:

• Silent Mode: Mutes operational sounds.
• Night Light: Toggles the soft ring light.
• Rear Wash: Activates the rear cleansing function.
• Front Wash: Activates the feminine cleansing function.
• Nozzle Cleaning: Initiates the self-cleaning cycle for the nozzle.
• Water Temp: Adjusts water temperature (3 levels).
• Seat Temp: Adjusts heated seat temperature (3 levels).
• Wind Temp: Adjusts warm air dryer temperature (3 levels).
• Position: Adjusts the nozzle position forward or backward.
• Pressure: Adjusts water pressure.
• Dryer: Activates the warm air drying function.
• ECO Mode: Activates energy-saving mode.
• Child Mode: Provides a gentle wash suitable for children.

7. Maintenance & Cleaning

Regular cleaning ensures optimal performance and hygiene:

• Nozzle Self-Cleaning: The stainless steel nozzle performs a self-cleaning cycle before and after each use. You can also manually activate the nozzle cleaning function via the remote control.
• Exterior Cleaning: Wipe the exterior surfaces of the bidet seat with a soft, damp cloth and mild detergent. Avoid abrasive cleaners or harsh chemicals.
• Filter Cleaning: Periodically check and clean the water filter to prevent blockages and maintain water flow.

Image: The bidet features an Electrolyzed Water Ion Self-Cleaning Nozzle, ensuring high standards of hygiene with every use.

8. Troubleshooting

If you encounter any issues, refer to the following common problems and solutions:

• No Water Flow / Weak Pressure: Check if the water supply valve is fully open. Ensure the water filter is not clogged. Verify water pressure settings on the remote.
• No Heat (Water/Seat/Air Dryer): Ensure the bidet is properly plugged into a grounded outlet. Check temperature settings on the remote. Allow a few moments for heating elements to reach desired temperature.
• Bidet Not Responding: Check if the power cord is securely plugged in. Ensure batteries in the remote control are functional and correctly inserted.
• T-Valve Leakage: Ensure all connections are tightened properly. Use plumbing tape on threaded connections. If the provided T-valve is not the correct size, contact customer support for a replacement.
• Night Light Not Working: Check the night light setting on the remote control.

For persistent issues or problems not listed here, please contact iliD customer support.

9. Specifications

10. Warranty & Support

The iliD Smart Bidet Toilet Seat comes with a 2-Year Warranty. If you experience any problems during installation or while using the product, please contact the iliD after-sales service team via email. Upon confirming the issue with the product, we will provide you with a solution or send you a new product free of charge.