Introduction
Thank you for choosing the BLNAN Rechargeable Battery Operated Motion Sensor LED Ceiling Light. This manual provides detailed instructions for the safe and efficient use of your new lighting fixture. Please read it thoroughly before installation and operation.
Overview of the BLNAN Rechargeable Motion Sensor LED Ceiling Light, highlighting its key features including USB charging, motion and light sensors, three color temperatures, 7000mAh battery, and 300 lumens brightness.
Key Features:
- 3 Color Temperatures: Select between 3000K (warm white), 4000K (neutral white), and 6000K (cool white) using a toggle switch before installation.
- Multiple Working Modes: AUTO (motion & light sensor), OFF (always off), and G (motion sensor only, day/night).
- Adjustable Timers: Choose between 30 seconds, 120 seconds, or always ON mode for light duration.
- PIR Motion Sensor: Features a 120° detection angle and 8-16ft detection range.
- 7000mAh Rechargeable Battery: Built-in lithium battery provides 300 lumens of light and charges via USB Type-C.
- Easy Wireless Installation: No wiring required, suitable for various indoor locations.
Safety Information
- Read all instructions carefully before use.
- This product is designed for indoor use only. Avoid exposure to water or high humidity.
- Do not attempt to disassemble or modify the light fixture. This may void the warranty and pose a safety risk.
- Keep out of reach of children.
- Use only the provided USB cable or a certified USB Type-C cable for charging.
- Ensure the mounting surface is stable and can support the weight of the light fixture.
Package Contents
Verify that all items are present in the package:
- Round Motion Sensor Ceiling Light with Built-in Battery (1 or 2 units, depending on pack size)
- Mounting Hardware (screws and expansion tubes)
- USB Cable (1 per light)
- Instruction Manual (this document)
Setup and Installation
The BLNAN ceiling light is designed for easy, wireless installation on ceilings or walls. No electrical wiring is required.
Pre-Installation Steps:
- Charge the Light: Before installation, fully charge the light using the provided USB Type-C cable. The charging indicator will turn green when fully charged.
- Select Color Temperature: Locate the toggle switch on the side of the light fixture. Choose your desired color temperature (3000K Warm White, 4000K Neutral White, or 6000K Cool White) before mounting. This setting cannot be changed easily after installation without removing the light.
Choose your preferred light color (3000K, 4000K, or 6000K) using the toggle switch before mounting the light.
Mounting Steps:
- Mark Drilling Points: Choose a suitable location on your ceiling or wall. Use the light's base as a template to mark two drilling points at a distance of approximately 6.5-8.5 cm.
- Drill Holes: Drill two holes at the marked points.
- Insert Expansion Nails: Drive the provided expansion nails (wall anchors) into the drilled holes.
- Secure Base: Align the light's mounting base with the expansion nails and secure it to the wall/ceiling using the provided screws.
- Attach Light Fixture: Press the light fixture onto the secured base and rotate it clockwise until it locks firmly in place.
Follow these steps for easy wireless installation of your ceiling light.
Operating Instructions
The BLNAN ceiling light offers various modes and timer settings for optimal performance.
1. Working Modes Selection:
Use the slide switch next to the motion sensor to select one of the three working modes:
- AUTO Mode: (Motion Activated & Light Sensor) The light will only activate when motion is detected in dark conditions. It will not turn on during daylight hours.
- OFF Mode: The light fixture is turned off and will not activate.
- G Mode: (Motion Activated Only) The light will activate when motion is detected, regardless of ambient light conditions (works both day and night).
2. Timer Settings:
The light offers three optional timers for how long it stays on after activation:
- 30 Seconds: The light will turn off 30 seconds after motion is no longer detected.
- 120 Seconds: The light will turn off 120 seconds after motion is no longer detected.
- ON (Always On) Mode: The light will remain continuously on until manually switched off or the battery depletes.
Understand and select the appropriate working mode and timer duration for your needs.
3. Motion Sensor Performance:
The built-in PIR infrared motion detector has a detection angle of up to 120° and a detection range of 8-16 feet (2.4-4.8 meters). For optimal performance, install the light at a height between 2.4-3.5 meters (approximately 8-11.5 feet).
Illustration of the motion sensor's detection capabilities and recommended installation height.
Charging the Battery
The BLNAN ceiling light features a built-in 7000mAh rechargeable lithium battery. To charge the light:
- Locate the USB Type-C charging port on the side of the light fixture.
- Connect the provided USB Type-C cable to the light and the other end to a USB charger, computer, or power bank.
- A red indicator light will illuminate during charging.
- The indicator light will turn green when the battery is fully charged. A full charge typically takes 6-8 hours.
In constant ON mode, the light can operate for approximately 10 hours. In induction (motion sensor) mode, it can last up to 30-60 days, depending on usage frequency.
Charging the light via USB and understanding the battery indicator lights.
Maintenance
- Cleaning: Wipe the light fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Care: To prolong battery life, avoid completely draining the battery frequently. Recharge the light when the brightness noticeably decreases. If storing for an extended period, charge the battery to about 50% every few months.
- Sensor Cleaning: Ensure the motion sensor lens is clean and free of dust or obstructions for optimal performance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on in AUTO mode. |
|
|
| Light turns on during the day. |
|
|
| Light does not hold a charge for long. |
|
|
| Light flickers or is dim. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand | BLNAN |
| Model Name | Ceiling Light |
| Model Number | LS-CL-G180-CHG (US-2-Black) |
| Product Dimensions | 7"L x 7"W x 0.98"H |
| Item Weight | 1.98 pounds |
| Material | Plastic |
| Power Source | Battery Powered |
| Battery Capacity | 7000mAh Lithium Battery |
| Charging Time | 6-8 hours (full charge) |
| Brightness | 300 Lumens |
| Light Source Type | LED (80 beads) |
| Color Temperatures | 3000K Warm White, 4000K Neutral White, 6000K Cool White |
| Motion Sensor Angle | 120° |
| Motion Sensor Range | 8-16 feet |
| Installation Type | Wireless Flush Mount (Ceiling or Wall) |
| Indoor/Outdoor Usage | Indoor |
Warranty and Support
BLNAN is committed to providing high-quality products. For any questions, concerns, or support needs regarding your BLNAN Rechargeable Motion Sensor LED Ceiling Light, please do not hesitate to contact us directly via Amazon email. Our customer service team is ready to assist you.
Please refer to your purchase platform for specific warranty details and return policies.