FABATO King Size Bed Frame with LED Headboard and USB/Type-C Charging Ports User Manual

1. Introduction and Overview

Thank you for choosing the FABATO King Size Bed Frame. This modern platform bed is designed for comfort and convenience, featuring a sturdy metal construction, an integrated LED headboard, and built-in USB and Type-C charging ports. It also offers ample under-bed storage space, eliminating the need for a box spring. This manual provides essential information for safe assembly, operation, and maintenance of your new bed frame.

2. Safety Information

• Maximum Load Capacity: Do not exceed the maximum load capacity of 365 kg (800 lbs) to prevent damage or injury.
• Assembly Caution: Exercise caution when assembling and handling metal parts to avoid cuts or pinches. It is recommended to assemble with two people.
• Secure Connections: Ensure all bolts and screws are tightened securely before using the bed frame. Periodically check and re-tighten connections.
• Children and Small Parts: Keep children away from small parts and packaging materials during assembly to prevent choking hazards.
• Stable Surface: Assemble the bed frame on a flat, stable surface to ensure proper alignment and stability.
• No Jumping: Do not jump on the bed frame. This can cause structural damage and void the warranty.

3. Package Contents

Please verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer service.

Figure 1: All components of the bed frame.

• Headboard Panels (Wood)
• Headboard Frame (Metal)
• Side Rails (Metal)
• Footboard (Metal)
• Center Support Bars (Metal)
• Support Legs (Metal)
• Bed Slats (Metal)
• Charging Station (USB/Type-C)
• LED Light Strip
• Remote Control for LED
• Assembly Hardware (Bolts, Screws, Allen Wrench)

4. Setup & Assembly

Follow these step-by-step instructions to assemble your FABATO King Size Bed Frame. It is recommended to have two people for assembly.

1. Install Charging Station: Carefully insert the charging station into the pre-cut opening on the wooden headboard panel. Secure it in place using the provided screws and Allen wrench.
2. Assemble Headboard Frame: Connect the two vertical headboard frame sections to the horizontal wooden headboard panels. Ensure the LED strip is correctly positioned.
3. Attach Wooden Panels to Headboard: Secure the wooden panels to the metal headboard frame using the specified bolts. Tighten them firmly but do not overtighten.
4. Assemble Side Rails: Attach the support legs to the side rails. These legs provide additional stability to the bed frame.
5. Connect Side Rails to Headboard: Align the side rails with the headboard and secure them using the appropriate bolts. Ensure a snug fit.
6. Attach Footboard: Connect the footboard to the opposite ends of the side rails, securing it with bolts.
7. Install Central Support Bars: Place the central support bars across the width of the bed frame and attach them to the designated points. These are crucial for mattress support.
8. Place Bed Slats: Lay the metal bed slats across the frame, ensuring each slat is securely seated in its designated slot or attached as per instructions. The anti-slip strips should be facing upwards to prevent mattress movement.
9. Final Check: Double-check all connections to ensure they are tight and the bed frame is stable before placing your mattress.

Figure 2: Anti-slip strips and rubber caps for stability and noise reduction.

5. Operating Instructions

5.1 LED Headboard Lighting

The integrated LED light strip in the headboard provides ambient lighting for your room.

• Power Connection: Ensure the LED light strip's power cable is securely plugged into a wall outlet.
• Remote Control: Use the provided remote control to operate the LED lights.
• Color Selection: Choose from 20 static colors to match your mood or room decor.
• Dynamic Modes: Select from 22 dynamic modes for various lighting effects.
• Brightness/Speed: Adjust the brightness of static colors or the speed of dynamic modes using the remote.

5.2 USB/Type-C Charging Ports

The headboard includes convenient USB and Type-C charging ports for your electronic devices.

• Power Requirement: The charging ports require the bed frame's power cable to be plugged into a live wall outlet.
• Device Connection: Connect your smartphone, tablet, or other compatible devices to the appropriate USB or Type-C port for charging.
• Output: Each port provides 5V/2A output.

Figure 3: LED headboard with USB/Type-C charging ports and remote control.

6. Maintenance

Proper maintenance will extend the life and appearance of your bed frame.

• Cleaning: Wipe metal and wooden surfaces with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals that could damage the finish.
• Tighten Fasteners: Periodically (e.g., every 3-6 months) check all bolts, screws, and connections. Re-tighten any loose fasteners to maintain the bed frame's stability and prevent squeaking.
• Under-Bed Area: Utilize the 10.4-inch under-bed clearance for storage. Keep the area clear of excessive clutter to allow for easy cleaning and air circulation.
• Noise Prevention: The bed frame is designed with anti-slip strips and rubber caps to minimize noise. Ensure these components remain in place and are not damaged.

7. Troubleshooting

Refer to this section for solutions to common issues.

8. Specifications

Figure 4: Key dimensions and weight capacity.

9. Warranty and Support

For information regarding the product warranty, please refer to the warranty policy provided at the time of purchase or contact your retailer. For technical assistance, missing parts, or any other inquiries, please contact FABATO customer service through the retailer's platform or the official FABATO website.