OutdoorMaster Shark 2S Electric Paddle Board Pump Instruction Manual

Introduction

The OutdoorMaster Shark 2S Electric Paddle Board Pump is designed for convenient and efficient inflation and deflation of various inflatables, including Stand-Up Paddleboards (SUPs), kayaks, air mattresses, and more. Equipped with an 88.8Wh rechargeable battery, this pump offers cordless operation, allowing you to inflate your gear anywhere. Its intelligent design includes a digital display for real-time pressure monitoring, an auto-off function to prevent over-inflation, and multiple charging options for maximum versatility.

Figure 1: OutdoorMaster Shark 2S Electric Paddle Board Pump and included accessories.

Key Features

• 88.8 Wh Rechargeable Battery: Inflate & deflate up to 6 SUP boards on a full charge, offering cordless convenience.
• Max 20PSI & Auto Off: Set desired pressure (up to 20 PSI) for automatic shut-off, preventing over-inflation. Real-time pressure monitoring via digital display.
• 2-in-1 Inflation & Deflation: Quickly inflates a 10.6FT | 15PSI paddle board in approximately 8 minutes 40 seconds and deflates in 1 minute 30 seconds.
• Dual Charging Options: Supports 45W Type-C fast charging (fully charged in 2 hours) and 12V/15.8V DC input for car charging (compatible with Tesla). Can also serve as an emergency power bank.
• 8 Nozzles for Wide Compatibility: Includes various nozzles to fit stand-up paddle boards, air beds, kayaks, kites, boats, swimming pools, tents, and more.

What's in the Box

• OutdoorMaster Shark 2S SUP Pump
• Adapter & Air Hose
• Charging Cable (Type-C)
• DC Car Charger
• 8 Gas Nozzles (including S2 Valve, H3 Valve, C7 Valve, Beach Ball Valve, Swim Ring Valve, Kite Valve, Inflatable Boat/Tent Valve)

Figure 2: All components included in the OutdoorMaster Shark 2S package.

Setup

Initial Charging

Before first use, fully charge the pump's internal battery. This can be done via the included Type-C charging cable or the 12V/15.8V DC car charger.

• Using Type-C: Connect the Type-C cable to the pump's Type-C input port and plug the other end into a compatible USB wall adapter (not included). A full charge takes approximately 2 hours.
• Using 12V/15.8V DC: Connect the DC car charger to the pump's DC input port and plug the other end into your vehicle's 12V/15.8V DC outlet.

Figure 3: Charging the pump using the Type-C input.

Figure 4: Charging the pump using the 12V/15.8V DC car input.

Hose and Nozzle Connection

• Identify the correct nozzle for your inflatable from the 8 included options.
• For inflation, connect the hose to the pump's INFLATE port (typically on the right side when facing the display).
• For deflation, connect the hose to the pump's DEFLATE port (typically on the left side when facing the display).
• Attach the selected nozzle securely to the other end of the hose.

Operating Instructions

Inflation

• Ensure the pump is charged and the hose is connected to the INFLATE port with the correct nozzle.
• Connect the nozzle to your inflatable's valve.
• Press and hold the power button (⏻) to turn on the pump. The digital display will illuminate.
• Use the mode button (⟳) to select the appropriate mode (SUP, Kite, or Mat). Each mode has a default pressure setting.
• Adjust the target pressure using the plus (+) and minus (-) buttons. The pump remembers the last set pressure.
• Press the power button (⏻) again to start inflation. The pump will automatically stop once the target pressure is reached.

Figure 5: The pump in action, inflating a paddleboard.

Deflation

• Connect the hose to the pump's DEFLATE port.
• Attach the correct nozzle to the other end of the hose and connect it to your inflatable's valve.
• Press and hold the power button (⏻) to turn on the pump.
• Press the power button (⏻) again to start deflation. The pump will actively suck air out of the inflatable, making packing easier.

Figure 6: The pump actively deflating a paddleboard for compact storage.

Maintenance

• Cleaning: Wipe the pump's exterior with a soft, damp cloth. Do not submerge the pump in water or use harsh chemicals.
• Storage: Store the pump in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the hose and nozzles are clean and dry before storage.
• Battery Care: For optimal battery life, charge the pump fully before long-term storage and recharge it every 3-6 months if not in use.

Troubleshooting

• Pump not turning on: Ensure the battery is charged. If using DC input, check the car's 12V/15.8V outlet for power.
• Pump not inflating/deflating: Check that the hose is securely connected to the correct port (INFLATE/DEFLATE) and that the nozzle is properly attached to the inflatable's valve. Ensure the inflatable's valve is open.
• Slow inflation: Verify that the selected mode and target pressure are appropriate for your inflatable. Ensure there are no kinks in the hose.
• Overheating: The pump has a built-in cooling system. If it feels excessively hot, allow it to cool down before continuing operation. Avoid blocking the ventilation ports during use.

Specifications

Warranty and Support

This OutdoorMaster Shark 2S Electric Paddle Board Pump comes with a one-year warranty from the manufacturer. For any support inquiries or warranty claims, please refer to the contact information provided in your product packaging or visit the official OutdoorMaster website.