Poafamx AL-500 Water Chiller User Manual

1. Introduction

Thank you for choosing the Poafamx AL-500 Water Chiller. This device is designed to maintain consistently cold water temperatures for various applications, including ice baths, large aquariums (up to 500L/132 gallons), and hydroponic systems. Please read this manual thoroughly before installation and operation to ensure safe and efficient use.

2. Safety Instructions

• Always ensure the chiller is placed on a stable, level surface.
• Do not operate the chiller with damaged power cords or plugs.
• Keep the chiller away from direct sunlight and heat sources.
• Ensure adequate ventilation around the unit. Maintain at least 6 inches (15 cm) of clear space from walls or other obstructions, especially around the air intake and exhaust vents.
• Do not immerse the chiller unit in water.
• Disconnect power before performing any maintenance or cleaning.
• This unit uses R290 refrigerant. Only qualified personnel should service the refrigerant system.
• For ice bath applications, it is recommended to use a filter to maintain water quality.

3. Package Contents

Verify that all components are present in the package:

• Poafamx AL-500 Water Chiller Unit
• Water Pump
• Water Pipes
• Hose Clamps and Connectors
• Power Cord
• User Manual (this document)

4. Product Features

• Powerful 1/2 HP Compressor Cooling: Utilizes R290 refrigerant for efficient and rapid temperature reduction.
• Efficient Heat Dissipation: Equipped with a large cooling fan and pure titanium evaporator for effective heat exchange.
• Versatile Capacity: Suitable for up to 132 gallons (500 liters) of water, ideal for ice baths, large aquariums, and hydroponic systems.
• Low Noise Operation: Designed to maintain a quiet and comfortable environment during use.
• Complete Cooling Kit: Includes all necessary accessories for quick and straightforward installation.

5. Setup

1. Placement: Position the chiller on a flat, stable surface. Ensure there is at least 6 inches (15 cm) of clear space around all vents for proper airflow and heat dissipation.
2. Connect Water Pipes:
   • Connect one end of a water pipe to the 'Water IN' port on your ice bath/aquarium/hydroponics system and the other end to one of the chiller's water outlets.
   • Connect the second water pipe to the 'Water OUT' port on your system and the other end to the remaining chiller water inlet.
   • Secure all connections with the provided hose clamps to prevent leaks.
3. Install Water Pump: Place the water pump inside your water reservoir (ice bath, aquarium, etc.) and connect it to the appropriate water pipe leading to the chiller.
4. Fill System with Water: Ensure your ice bath, aquarium, or hydroponics system is filled with water to the appropriate level.
5. Connect Power: Plug the chiller's power cord into a grounded electrical outlet. Ensure the power supply matches the chiller's requirements (110V).

For a visual guide on connecting the chiller to an ice bath, please refer to the video below:

6. Operating Instructions

1. Power On: Once all connections are secure and the system is filled with water, plug in the chiller and the water pump. The chiller's display will illuminate.
2. Set Temperature: Use the control panel buttons (usually 'SET', 'UP', 'DOWN') to adjust the desired water temperature. Refer to the specific button functions on your unit's display.
3. Monitoring: The display will show the current water temperature. The chiller will automatically activate its cooling cycle to reach and maintain the set temperature.
4. Power Off: To turn off the chiller, simply unplug it from the power source.

7. Maintenance

• Regular Cleaning: Periodically clean the exterior of the chiller with a soft, damp cloth. Ensure vents are free from dust and debris to maintain efficient heat dissipation.
• Water Quality: For aquariums and hydroponics, regularly monitor water quality. For ice baths, consider using a filter and changing water as needed to prevent buildup and maintain hygiene.
• Pipe Inspection: Regularly check water pipes and connections for any signs of wear, cracks, or leaks. Replace damaged components immediately.
• Pump Maintenance: Follow the manufacturer's instructions for cleaning and maintaining the water pump to ensure optimal flow.

8. Troubleshooting

• Chiller Not Turning On: Check power connections, ensure the outlet is functional, and verify the power cord is not damaged.
• Water Not Cooling:
  • Ensure the set temperature is lower than the current water temperature.
  • Check for obstructions around the chiller's vents.
  • Verify the water pump is operating and water is circulating.
  • Ensure the water volume does not exceed the chiller's capacity.
• Water Leaks: Inspect all pipe connections and hose clamps. Tighten or replace as necessary. Check the water pump for leaks.
• Unusual Noise: Ensure the chiller is on a stable surface. Check for any loose parts or obstructions in the fan. If the noise persists or is excessive, contact customer support.

If you encounter issues not covered here, please contact Poafamx customer service for assistance.

9. Specifications

Specification	Value
Model	AL-500
Brand	Poafamx
Power	1/2 HP
Water Volume Capacity	≤ 500L (132 Gallons)
Voltage	110V
Refrigerant	R290
Weight	21 KG (46 lb)
Product Dimensions (L x W x H)	36L x 32W x 32H Centimetres (14.2"L x 12.6"W x 12.6"H)
Material	Stainless Steel
Color	Black
Power Source	AC
Style	Submersible (refers to pump, not chiller unit)

10. Warranty and Support

The Poafamx AL-500 Water Chiller comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use conditions.

For warranty claims, technical support, or any questions regarding your product, please contact the Poafamx customer service team. They are committed to providing satisfactory solutions for any problems encountered.

Please retain your proof of purchase for warranty validation.