myFirst Screen Protector User Manual

Introduction

This manual provides instructions for the proper installation and care of your myFirst Tempered Glass Screen Protector, designed specifically for the myFirst Fone R2 and myFirst Fone R1c smartwatches. This screen protector offers enhanced durability and protection against scratches and minor impacts, helping to preserve the display of your device.

Safety Information

Please read the following safety information carefully before installation:

• Keep the screen protector and packaging materials out of reach of small children to prevent choking hazards.
• Handle the tempered glass carefully. While durable, it can break if subjected to extreme force or bending, potentially causing sharp edges.
• Do not attempt to reapply the screen protector once it has been removed, as this may compromise its adhesive and protective qualities.
• Ensure your hands are clean and dry before handling the screen protector and your device.

What's in the Box

Verify that all items are present:

• 1 x myFirst Tempered Glass Screen Protector
• 1 x Cleaning Wipe (often includes a wet and dry wipe)
• 1 x Dust Absorber Sticker

Image showing the screen protector packaging, including the screen protector itself, a cleaning wipe, and a dust absorber sticker.

Setup: Installation Guide

Follow these steps carefully for optimal installation:

1. Prepare Your Workspace: Choose a clean, dust-free environment with good lighting. Wash your hands thoroughly to remove any oils or dirt.
2. Clean the Watch Screen: Use the provided wet cleaning wipe to thoroughly clean the surface of your myFirst Fone R2 or R1c smartwatch screen. Ensure all smudges, fingerprints, and dirt are removed.
3. Dry the Screen: Immediately use the dry cleaning wipe to dry the screen completely. Ensure no moisture or streaks remain.
4. Remove Dust: Use the dust absorber sticker to gently dab the screen surface. This will pick up any remaining dust particles. Inspect the screen carefully under light to ensure it is completely dust-free.
5. Align the Screen Protector: Carefully peel off the protective film from the adhesive side of the tempered glass screen protector (usually marked "1 BACK"). Hold the screen protector by its edges. Align it precisely with the smartwatch screen, ensuring the cutouts (if any) match the watch's features (e.g., camera, sensors).


Image illustrating the alignment process of the circular screen protector over the smartwatch display.

6. Apply the Protector: Once aligned, gently lower the screen protector onto the watch screen. The adhesive will begin to spread automatically. If bubbles appear, gently push them towards the edges using a soft cloth or a credit card wrapped in a cloth.


Image showing the myFirst Fone R2/R1C smartwatch with the screen protector successfully applied to its display.

7. Final Inspection: Check for any remaining bubbles or dust. Small bubbles may disappear over 24-48 hours. If large bubbles persist, gently lift the nearest edge of the protector and re-apply, pushing the air out.

Operating (Care Tips)

While a screen protector does not have operational functions, proper care ensures its longevity and effectiveness:

• Avoid placing your smartwatch with the screen protector face down on rough surfaces.
• Do not use sharp objects to scratch the screen protector, even though it is scratch-resistant.
• If the screen protector becomes cracked or severely damaged, it is recommended to replace it to maintain optimal protection for your smartwatch display.

Maintenance

To keep your screen protector clean and clear:

• Wipe the screen protector regularly with a soft, lint-free cloth.
• For stubborn smudges, slightly dampen the cloth with water or a screen cleaner specifically designed for electronics. Avoid harsh chemicals or abrasive materials.
• Do not spray cleaning solutions directly onto the screen protector or smartwatch.

Troubleshooting

Common issues and their solutions:

Specifications

Image displaying the smartwatch with the screen protector, emphasizing its scratch resistance and drop protection features.

Warranty and Support

For warranty information and customer support, please refer to the official myFirst website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

Manufacturer: myFirst Tech Asia Pte Ltd

Country of Origin: Singapore