Introduction
Thank you for choosing the JIMMYJANE Mini Chroma. This compact and powerful bullet vibrator is designed for discreet use and features multiple intensity levels and vibration patterns, controlled by an easy-to-use remote. This manual provides essential information for safe and effective use, maintenance, and troubleshooting.
Important Safety Information
- Read all instructions before use.
- This product is for external use only.
- Do not use if the product appears damaged or defective.
- Discontinue use immediately if you experience any discomfort or pain.
- Keep out of reach of children.
- Consult a healthcare professional if you have any medical conditions or concerns.
- Clean the product thoroughly before and after each use as described in the Maintenance section.
Package Contents
Verify that all items are present in your package:
- JIMMYJANE Mini Chroma Bullet Vibrator
- Wireless Remote Control
- USB Charging Cable
- User Manual (this document)

Image: Product packaging for the Mini Chroma, displaying the vibrator and remote.
Setup
Charging the Device
Before first use, fully charge your Mini Chroma vibrator. The device is rechargeable via a USB cable.
- Locate the charging port on the vibrator. This is typically a small, discreet port.
- Connect the USB charging cable to the vibrator's charging port.
- Plug the other end of the USB cable into a standard USB power adapter (not included) or a computer's USB port.
- The indicator light on the vibrator will illuminate or flash during charging. Refer to the product's specific indicator light behavior for full charge status (e.g., solid light, light off).
- Charging typically takes 1-2 hours for a full charge. Do not overcharge.
Remote Control
The wireless remote control is typically pre-paired with the Mini Chroma vibrator. Ensure the remote has a working battery (if applicable, check for a battery compartment and insert the correct battery type if not pre-installed).

Image: The Mini Chroma vibrator shown alongside its wireless remote control.
Operating Instructions
The Mini Chroma offers 3 intensity levels and 7 vibration patterns, totaling 10 modes of operation.

Image: Close-up view of the teal-colored JIMMYJANE Mini Chroma bullet vibrator.
Powering On/Off
- To Power On: Press and hold the power button on the vibrator or the designated power button on the remote control for 2-3 seconds until the device activates.
- To Power Off: Press and hold the power button on the vibrator or the remote control for 2-3 seconds until the device deactivates. A quick press may cycle modes.
Changing Modes and Intensity
- Once powered on, short press the power/mode button on the vibrator or the mode button on the remote to cycle through the 7 vibration patterns.
- To adjust intensity, use the dedicated intensity buttons on the remote control (if available) or cycle through the patterns until you reach the desired intensity level within a pattern. The device features 3 distinct intensity levels.
Maintenance
Cleaning
Proper cleaning ensures hygiene and extends the life of your device.
- Always clean the vibrator before and after each use.
- Wash the device with warm water and a mild, toy-safe soap.
- Rinse thoroughly to remove all soap residue.
- Dry completely with a lint-free cloth or air dry before storing.
- Do not use harsh cleaners, alcohol, or petroleum-based products, as these can damage the silicone and aluminum materials.
Storage
Store the Mini Chroma in a clean, dry place away from direct sunlight and extreme temperatures. Keep it separate from other toys made of different materials to prevent material degradation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Battery is depleted. | Charge the device fully using the provided USB cable. |
| Device does not turn on. | Power button not pressed correctly. | Press and hold the power button for 2-3 seconds. |
| Remote control is not working. | Remote battery is depleted or not inserted correctly. | Check or replace the remote control battery. Ensure it is inserted with correct polarity. |
| Remote control is not working. | Out of range or interference. | Ensure the remote is within close proximity to the vibrator and there are no obstructions. |
| Vibrations feel weak. | Low battery. | Recharge the device. |
Specifications
- Model: Mini Chroma
- Material: Aluminum, Silicone
- Color: Teal
- Vibration Modes: 10 (3 intensity levels, 7 patterns)
- Power Source: Rechargeable Battery (USB charging)
- Water Resistance Level: Water Resistant
- Manufacturer: Pipedream Products
Warranty and Support
For warranty information or technical support, please refer to the manufacturer's official website or contact the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.