FIFINE AmpliGame A20 Computer Speakers User Manual

1. Introduction

The FIFINE AmpliGame A20 Computer Speakers are designed to provide clear and dynamic audio for various applications, including gaming, music, and general multimedia use. These wired speakers feature controllable RGB lighting and intuitive controls for an enhanced user experience.

2. What's in the Box

• Wired Computer Speakers (2 units)
• User's Manual

3. Setup Instructions

The AmpliGame A20 speakers are designed for simple plug-and-play setup. Follow these steps to connect your speakers:

1. Position the Speakers: Place the two speaker units on either side of your computer monitor or desired audio source. Ensure adequate space for optimal stereo sound.
2. Connect for Power: Plug the USB-A connector into an available USB port on your computer, laptop, power bank, or a 5V USB power adapter. This connection provides power to the speakers.
3. Connect for Audio: Plug the 3.5mm audio jack into the audio output port of your computer, monitor, phone, or tablet. This connection transmits the audio signal to the speakers.
4. Verify Connection: Once both cables are connected, the speakers should power on and the RGB lighting will activate.

4. Operating Instructions

The AmpliGame A20 speakers offer straightforward controls for managing audio and lighting.

4.1. Power and Mute Control

• Power ON/OFF: Long press the power button (marked with a circle and vertical line) located on the left speaker to turn the speakers on or off.
• Mute/Unmute: Short press the power button to instantly mute or unmute the audio.

4.2. Volume Control

• Increase Volume: Press the '+' button on the right speaker.
• Decrease Volume: Press the '-' button on the right speaker.

4.3. RGB Lighting Control

The speakers feature controllable RGB lighting with multiple dynamic modes and color options.

• Change RGB Mode/Color: Tap the touch-sensitive button (marked with a sun-like icon) on top of the right speaker to cycle through 6 dynamic modes and 7 static color options.
• Turn RGB ON/OFF: Long press the touch-sensitive button on top of the right speaker to turn the RGB lights on or off. The speakers will continue to function even with the lights off.

5. Maintenance

To ensure the longevity and optimal performance of your FIFINE AmpliGame A20 speakers, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe the exterior of the speakers. Avoid using liquid cleaners or abrasive materials, as they may damage the finish or internal components.
• Storage: Store the speakers in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
• Cable Care: Avoid bending or twisting the integrated cables excessively to prevent internal damage.

6. Troubleshooting

If you encounter any issues with your speakers, refer to the following troubleshooting tips:

• No Sound:
  • Ensure both the USB and 3.5mm audio cables are securely connected.
  • Check the volume levels on both the speakers and your connected device.
  • Verify that the speakers are powered on (long press the power button).
  • Confirm that the audio output on your device is set to the correct port.
• RGB Lights Not Working:
  • Ensure the USB power cable is connected.
  • Short press the touch-sensitive button on top of the right speaker to cycle through modes.
  • Long press the touch-sensitive button to ensure the lights haven't been turned off.
• Distorted Sound:
  • Reduce the volume on both the speakers and your connected device.
  • Ensure the audio source is not corrupted or of low quality.

7. Specifications

8. Warranty and Support

The FIFINE AmpliGame A20 Computer Speakers come with a limited warranty. For detailed warranty information, product support, or technical assistance, please refer to the official FIFINE website or contact their customer service directly.

You can visit the official FIFINE Store for more information: FIFINE Store on Amazon