1. Product Overview
The ALLIANCE LAUNDRY SYSTEMS Kit Inner Door Bezel White (808095) is a genuine OEM replacement part designed for various laundry appliances. This component is crucial for the proper functioning and aesthetic integrity of the appliance's door assembly.
Image 1.1: The ALLIANCE LAUNDRY SYSTEMS Kit Inner Door Bezel White (808095). This image displays the circular white plastic bezel, which forms the inner frame of the appliance door.
This inner door bezel is manufactured from durable plastic and polypropylene materials, ensuring longevity and a secure fit within the appliance's door mechanism. It serves to frame the inner portion of the door, often securing the door glass or other internal components.
2. Compatibility
This inner door bezel is compatible with a range of laundry appliances from various brands under the Alliance Laundry Systems umbrella. It is designed to fit:
- Speed Queen Washer/Dryer models
- Ipso Washer/Dryer models
- Huebsch Washer/Dryer models
- Primus Washer/Dryer models
- UniMac Washer/Dryer models
- Other Alliance Laundry Systems Washer/Dryer models
Always verify the part number (808095) against your appliance's specific requirements or service manual to ensure correct fitment.
3. Setup and Installation
Installation of the inner door bezel typically involves disassembling the appliance door. It is recommended that installation be performed by a qualified technician. Always disconnect power to the appliance before beginning any repair work.
Safety Precautions:
- Disconnect Power: Ensure the appliance is unplugged from the electrical outlet or the circuit breaker is turned off before starting.
- Wear Protective Gear: Use gloves and eye protection to prevent injury.
- Handle with Care: Appliance doors can be heavy and may contain glass. Handle components carefully to avoid breakage or injury.
General Installation Steps:
- Access the Door Assembly: Depending on the appliance model, this may involve removing the door from its hinges or disassembling it while still attached.
- Disassemble the Door: Carefully remove screws or clips securing the outer and inner panels of the door. Note the position of all components for reassembly.
- Remove Old Bezel: Once the door is sufficiently disassembled, locate and remove the old inner door bezel. It may be held in place by screws, clips, or adhesive.
- Install New Bezel: Position the new ALLIANCE LAUNDRY SYSTEMS 808095 inner door bezel into place. Ensure it aligns correctly with all mounting points.
- Secure New Bezel: Fasten the new bezel using the original screws or clips. Do not overtighten.
- Reassemble Door: Carefully reassemble the door components in reverse order of disassembly. Ensure all screws are tightened and panels are securely fitted.
- Reattach Door (if removed): If the door was removed, reattach it to the appliance hinges.
- Test Functionality: Once reassembled, reconnect power and test the door's operation to ensure it opens, closes, and latches correctly.
4. Operating Function
Once correctly installed, the ALLIANCE LAUNDRY SYSTEMS Kit Inner Door Bezel (808095) contributes to the structural integrity and proper sealing of the appliance door. It helps to:
- Secure Internal Components: Holds the inner door glass or other internal door components firmly in place.
- Maintain Door Alignment: Ensures the door maintains its correct shape and alignment, which is critical for proper latching and sealing.
- Enhance Aesthetics: Provides a finished look to the inner side of the appliance door.
A properly functioning bezel is essential for the overall efficiency and safety of the laundry appliance.
5. Maintenance
The inner door bezel requires minimal maintenance. Regular inspection and cleaning are sufficient to ensure its longevity and proper function.
Cleaning:
- Wipe the bezel surface with a soft, damp cloth to remove dust, lint, or detergent residue.
- Avoid abrasive cleaners or harsh chemicals, as these can damage the plastic material.
Inspection:
- Periodically check the bezel for any signs of cracks, warping, or damage.
- Ensure all screws or fasteners holding the bezel in place are secure. Loose fasteners can lead to door misalignment or component rattling.
6. Troubleshooting
If you experience issues related to the appliance door after installing or while using the inner door bezel, consider the following:
| Issue | Possible Cause | Solution |
|---|---|---|
| Door not closing/latching properly | Bezel improperly seated or misaligned; damaged bezel; loose mounting screws. | Recheck bezel installation for proper alignment. Tighten all mounting screws. Inspect bezel for damage and replace if necessary. |
| Rattling noise from door | Loose bezel or other internal door components. | Ensure all bezel mounting screws are tight. Check other internal door components for looseness. |
| Visible cracks or damage on bezel | Physical impact; material fatigue. | The bezel is damaged and requires replacement. |
7. Specifications
Key specifications for the ALLIANCE LAUNDRY SYSTEMS Kit Inner Door Bezel White (808095):
| Specification | Detail |
|---|---|
| Part Number | 808095 |
| Brand | ALLIANCE LAUNDRY SYSTEMS |
| Material Type | Plastic, Polypropylene |
| Item Weight | 2.6 pounds |
| Package Dimensions | 24 x 23.5 x 3 inches |
| Manufacturer | Alliance Laundry Systems |
| Date First Available | March 12, 2024 |
8. Warranty and Support
For specific warranty information regarding the ALLIANCE LAUNDRY SYSTEMS Kit Inner Door Bezel White (808095), please refer to the documentation provided with your original appliance or contact Alliance Laundry Systems directly. Warranty terms typically cover manufacturing defects.
If you require technical assistance or need to purchase replacement parts, please contact your authorized Alliance Laundry Systems dealer or a certified appliance repair technician. When contacting support, have your appliance model number and the part number (808095) readily available.
For general inquiries or to find a service provider, visit the official Alliance Laundry Systems website or consult your appliance's user manual for contact details.
