1. Introduction
This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your Toursor X14 Adult Electric Scooter. Please read this manual thoroughly before operating the scooter to ensure proper use and to prevent injury or damage.
2. Safety Guidelines
- Wear Protective Gear: Always wear a helmet, knee pads, elbow pads, and appropriate footwear when riding.
- Pre-Ride Inspection: Before each ride, check tire pressure, brake functionality, and ensure all fasteners are secure.
- Adhere to Local Laws: Be aware of and comply with all local traffic laws and regulations regarding electric scooters.
- Environmental Conditions: Avoid riding in heavy rain, snow, or icy conditions. Reduced visibility and traction can lead to accidents.
- Weight Limit: Do not exceed the maximum weight limit of 200 kg (440 lbs).
- Proper Braking: Familiarize yourself with the hydraulic disc brakes. Practice braking in a safe, open area.
- Visibility: Use the scooter's lights and wear reflective clothing, especially when riding at night or in low-light conditions.
3. Package Contents
Upon unpacking, verify that all items listed below are present and in good condition:
- 1x Toursor X14 Electric Scooter
- 2x Standard Chargers
- 1x Functional Wrench
- 1x User's Manual
- 1x Toolkit
- Keys for ignition
- 1x Remote Control (for ambient lights)
- 1x Phone Holder
- 1x Spanner
- 1x Tire Inflator

Figure 3.1: Toursor X14 Electric Scooter with all included accessories.
4. Setup and Assembly
Follow these steps to assemble your Toursor X14 Electric Scooter:
- Unfold the Electric Scooter: Carefully lift the scooter from its packaging and unfold the main frame. Ensure all locking mechanisms click into place securely.
- Install the Kickstand: Attach the kickstand to the designated mounting points on the scooter's deck using the provided tools. Tighten all screws firmly.
- Install the Handlebar and LCD Display: Secure the handlebar to the stem. Connect the wiring for the LCD display and other controls. Ensure all connections are snug and the display is properly positioned for visibility.
- Install the Removable Seat: Assemble the seat post and attach the seat. Insert the assembled seat into the designated slot on the scooter's deck and secure it with the locking mechanism. Adjust the height to your preference.
- Perform Switch Testing: After assembly, turn on the scooter using the key and power button. Test all switches, including headlights, turn signals, horn, and throttle response, to ensure they are functioning correctly.
- Safety Lock (Fold and Unfold): Familiarize yourself with the safety lock mechanism for folding and unfolding the scooter. Always ensure it is engaged when riding and disengaged when folding.
Video 4.1: Step-by-step installation guide for the F19 Electric Scooter, demonstrating unfolding, kickstand, handlebar, and seat installation, along with switch testing and safety lock operation.
5. Components Overview
The Toursor X14 Electric Scooter is engineered with robust components for performance and durability:
- Motors: Equipped with two powerful 5000W brushless hub motors, totaling 10000W, designed for high performance and efficient heat dissipation.
- Battery: Features a 60V 40Ah Lithium-Ion battery, providing a substantial range for extended rides.
- Tires: Comes with 14-inch off-road pneumatic tires, suitable for various terrains including snow, sand, wet, and rough roads.
- Brakes: Utilizes hydraulic disc brakes on both the front and rear wheels for reliable stopping power.
- Suspension: Features a dual suspension system with 1800lb motorcycle-grade hydraulic front suspension and 1800lb dual-spring rear suspension for a comfortable ride.
- Display: An enhanced LCD display provides real-time information such as battery level, riding speed, steering information, fault warnings, and mileage.
- Lighting: Includes 4 super bright headlights, rear brake light, rear turn signal lights, and colorful ambient lights on the deck for enhanced visibility and safety.
- Frame: Constructed from an all-aluminum alloy body, ensuring durability and a modern aesthetic.

Figure 5.1: High-capacity 60V 50AH Lithium-Ion battery for extended range.

Figure 5.2: Illustration of the dual 5000W brushless motors and 14-inch off-road tires, highlighting 40° climbing ability and 440 lbs max load.

Figure 5.3: The 14-inch vacuum all-terrain tires are designed for optimal performance on snow, sand, wet, and rough roads.

Figure 5.4: Enhanced LCD display and handlebar controls, including brake levers, turn indicators, speed modes, horn, on/off switch, headlights, and thumb throttle.

Figure 5.5: Advanced dual suspension system featuring 1800lb motorcycle-grade hydraulic front suspension and 1800lb dual-spring rear suspension.
6. Operating Instructions
- Power On/Off: Insert the key into the ignition and turn it to the 'ON' position. Press the power button on the handlebar to activate the scooter. To turn off, press the power button again and turn the key to 'OFF'.
- LCD Display: The LCD display shows critical information. Familiarize yourself with the battery level indicator, current speed, selected driving mode, and any fault warnings.
- Driving Modes: The scooter offers three motion modes. Use the mode selector buttons on the handlebar to switch between modes according to your riding preference and terrain.
- Acceleration: Use the thumb throttle to control your speed. Apply gentle pressure for smooth acceleration.
- Braking: The scooter is equipped with hydraulic disc brakes. Use the brake levers on the handlebar to slow down or stop. Apply both brakes simultaneously for optimal stopping performance.
- Lighting and Signals: Activate the headlights for night riding. Use the turn signal switches to indicate your direction to others. The scooter also features colorful ambient lights for visibility.
- Charging: Connect the two standard chargers to the dual charging ports located on the side of the scooter. A full charge typically takes 8-10 hours. Ensure the scooter is turned off during charging.

Figure 6.1: Scooter lighting system for safe driving at night, including 4 super bright headlights, rear brake light, rear turn signal lights, and ambient lights.

Figure 6.2: The rechargeable battery features dual charging ports for efficient power replenishment.
7. Maintenance
- Regular Cleaning: Clean your scooter regularly with a damp cloth. Avoid using high-pressure water jets directly on electrical components.
- Tire Pressure: Check and maintain the recommended tire pressure for optimal performance and safety. Use the provided tire inflator as needed.
- Brake Inspection: Periodically inspect brake pads and discs for wear. Ensure brake levers operate smoothly and provide adequate stopping power.
- Battery Care: Store the scooter in a cool, dry place. If storing for an extended period, charge the battery to approximately 50-70% and recharge every 1-2 months to prolong battery life.
- Fastener Checks: Regularly check all screws and bolts for tightness, especially after off-road riding.
8. Troubleshooting
If you encounter issues with your Toursor X14 Electric Scooter, consider the following common solutions:
- Scooter Not Turning On: Ensure the key is in the 'ON' position and the power button is pressed. Check battery charge level.
- Reduced Range: Verify tire pressure is correct. Riding in higher speed modes, on inclines, or with heavy loads will reduce range. Ensure the battery is fully charged.
- Braking Issues: Inspect brake pads for wear and replace if necessary. Check hydraulic fluid levels if applicable.
- Unusual Noises: Stop riding immediately and inspect the scooter for loose parts, debris in the wheels, or damaged components.
For persistent issues or complex repairs, contact customer support.
9. Specifications
| Feature | Specification |
|---|---|
| Brand | Toursor |
| Model Name | X14 |
| Age Range | Adult |
| Motor Power | 10000W (2x 5000W Brushless Hub Motors) |
| Battery | 60V 40Ah Li-Ion |
| Maximum Distance Range | Up to 75 Miles |
| Charging Time | 8-10 Hours (with dual chargers) |
| Weight Limit | 200 Kilograms (440 lbs) |
| Product Dimensions | 59.06"L x 13.39"W x 59.06"H |
| Number of Wheels | 2 |
| Wheel Size | 14 Inches |
| Wheel Type | Pneumatic, Off-Road |
| Frame Material | Aluminum Alloy |
| Suspension Type | Dual Suspension (Hydraulic Front, Dual-Spring Rear) |
| Brake Style | Front and Rear Hydraulic Disc Brakes |
| Climbing Ability | Up to 40 Degrees |
| Special Features | Adjustable Handlebar Height, Digital Display, Dual Charging Port, Removable Seat, Colorful Ambient Lights |

Figure 9.1: The scooter is powered by powerful brushless DC Hall motors, featuring a dual-motor setup for enhanced performance.

Figure 9.2: The 14-inch off-road vacuum tires are designed to handle various terrains, including snow, mountain, sand, and city roads.
10. Warranty and Support
For any questions, technical support, or service inquiries regarding your Toursor X14 Electric Scooter, please contact our customer support team. We aim to respond within 24 hours.
Frequently Asked Questions:
- What material is the electric scooter made of?
Our electric scooter is made of high-intensity aluminum alloy material, which is manufactured using CNC processing. - How long does it take to fully charge the electric scooter?
Each electric scooter includes 2 chargers. With dual charging, it takes 8-10 hours to be fully charged. - How long until I receive the package after ordering?
You can expect to receive the package in approximately 5-7 working days after ordering. - Does it support pickup?
Yes, pickup is supported at our warehouse located at 5920 E Slauson Avenue, Commerce, CA, 90040. Tailgate shipping fees will not be charged for warehouse pickups. - Can items be returned unconditionally?
To avoid unnecessary losses, please pay attention to the product size when ordering. Returns are not accepted for non-quality problems.