Bellemave FST00085-F2-AK1
Contents
Bellemave Full Size Loft Bed with Desk and Storage Stairs
User Manual
Model: FST00085-F2-AK1
1. Introduction
This manual provides essential information for the assembly, operation, and maintenance of your Bellemave Full Size Loft Bed with Desk and Storage Stairs. Designed for optimal space utilization, this loft bed combines a comfortable sleeping area with a functional workspace and integrated storage, making it ideal for various living environments.
The contemporary design features a streamlined heavy metal crafted frame with a white finish, complemented by wooden shelves and desk surfaces. It is suitable for apartments, dormitories, and children's rooms, offering a practical and stylish solution for maximizing space.
2. Safety Information
Important Safety Warnings:
- Always ensure all four sides of the loft bed are equipped with protective guardrails to prevent accidental falls. This bed is designed with full-length guardrails for your safety.
- Recommended mattress thickness is 6-8 inches. Ensure the mattress is properly secured to prevent entrapment or falling risks.
- This product requires assembly. Follow all instructions carefully. Improper assembly can lead to instability and injury.
- Regularly inspect all connections and hardware to ensure they remain tight. Do not use the bed if any components are damaged or missing.
- Do not allow children under 6 years of age on the upper bunk.
- The maximum weight capacity for the bed is approximately 250 lbs. The storage stairs can hold up to 220 lbs. Do not exceed these limits.
3. Setup (Assembly)
Before You Begin:
- This loft bed comes in 2 boxes. Ensure all parts are present before starting assembly. A detailed parts list is included in your package.
- Assembly typically requires two people. While one person can manage most parts, assistance is recommended for larger components and stability.
- Tools required for assembly are provided with the product.
Assembly Tips:
- Carefully review the assembly instructions. Some parts may not be explicitly labeled or may appear similar; refer to the diagrams closely.
- For certain steps, it may be necessary to keep screws or connections loose until other components are in place, then tighten them fully.
- Exercise caution when handling screws and metal frames to avoid injury, as some edges may be sharp.
- If you encounter mislabeled parts in the instructions, cross-reference with the 'Stairs part view' or other diagrams to identify the correct component.

This diagram illustrates the overall dimensions of the loft bed, including length, width, and height, as well as specific measurements for the desk and storage stairs. Refer to this for space planning and assembly.

This image provides a side perspective of the assembled loft bed, clearly showing the structure of the storage stairs and the integrated desk area beneath the bed.
4. Operating Instructions
The Bellemave Full Size Loft Bed offers a versatile solution for sleeping, studying, and storage.
- Sleeping Area: The upper bunk provides a comfortable sleeping space. Ensure the mattress fits securely within the guardrails.
- Integrated Desk: The spacious desk located underneath the bed offers a dedicated area for work, study, or creative activities.
- Storage Stairs: The lateral 4-tier ladder doubles as functional storage shelves. These can be used to organize books, toys, decorative items, or other personal belongings.
This design maximizes floor space, making it ideal for smaller rooms, apartments, or dormitories.

This image shows the Bellemave Full Size Loft Bed set up in a room, demonstrating its functionality with the bed, desk, and storage stairs in use.

A closer view of the integrated desk area, highlighting the ample space available for study or work beneath the loft bed.
5. Maintenance
To ensure the longevity and appearance of your Bellemave Loft Bed, follow these maintenance guidelines:
- Cleaning: Wipe down metal and wood surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners. For general care, dry clean only as per product specifications, meaning avoid wet cleaning that could damage the finish.
- Hardware Inspection: Periodically check all bolts, screws, and connections to ensure they are tight. Re-tighten as necessary to maintain structural integrity and prevent wobbling.
- Surface Protection: Use coasters or protective pads on the desk surface to prevent scratches or damage from spills.
- Mattress Care: Follow the mattress manufacturer's instructions for care and cleaning.
6. Troubleshooting
This section addresses common issues you might encounter with your Bellemave Loft Bed.
- Wobbling/Instability: If the bed feels wobbly, ensure all assembly screws and bolts are fully tightened. Go through each connection point and secure them firmly. Over time, hardware can loosen, requiring periodic re-tightening.
- Missing or Mislabeled Parts: If you find parts are missing or the instructions contain mislabels, contact Bellemave customer support immediately for assistance. Do not attempt to substitute parts.
- Dents or Scratches on Metal Frame: Minor cosmetic imperfections may occur during shipping or assembly. If these affect the structural integrity, contact customer support. Otherwise, they typically do not impact functionality.
- Mattress Fit Issues: Ensure you are using a full-size mattress. The bed is designed for a mattress with a width of 56 inches. If your mattress does not fit, verify its dimensions.
- Stair Safety: For enhanced safety, consider adding stair nosing to the steps to prevent slips. Some users also recommend adding a small board at the top opening of the stairs to secure the mattress edge.
7. Specifications
| Feature | Detail |
|---|---|
| Size | Full |
| Product Dimensions | 92.7"L x 56"W x 67"H |
| Special Feature | No Box Spring Needed |
| Color | White With Desk |
| Finish Type | Lacquered |
| Included Components | Guardrails, Slat, Ladders |
| Brand | Bellemave |
| Furniture Finish | White |
| Product Care Instructions | Dry Clean Only |
| Assembly Required | Yes |
| Ground To Item Distance | 13.1 Inches |
| Manufacturer | Bellemave |
| UPC | 733805306687 |
| Form Factor | Loft Bed |
| Item Weight | 65 pounds |
| ASIN | B0CXPR9G6X |
| Country of Origin | Vietnam |
| Item model number | FST00085-F2-AK1 |
| Batteries required | No |
8. Warranty & Support
Manufacturer: Bellemave
Customer Support: For any questions, concerns, or assistance with assembly or parts, please contact Bellemave customer support. You can often find contact information on the Bellemave store page on Amazon or within your product packaging.
Online Resources: Visit the official Bellemave Store on Amazon for additional product information and support: Bellemave Store
Protection Plans: Extended protection plans may be available for purchase separately. Refer to your purchase details for more information.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.