1. Introduction
Thank you for choosing the Tribit XSound Go Portable Wireless Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. Please read this manual thoroughly before use and retain it for future reference.
Image 1.1: Tribit XSound Go Portable Bluetooth Speaker (Red). This image shows the speaker from a slight angle, highlighting its compact, cylindrical design and the Tribit logo on the front grille.
2. Product Overview
2.1 Package Contents
- Tribit XSound Go Bluetooth Speaker
- USB-C Charging Cable
- User Manual
2.2 Speaker Components and Controls
Familiarize yourself with the buttons and ports on your Tribit XSound Go speaker:
Image 2.1: Side view of the Tribit XSound Go speaker, illustrating the USB-C charging port and AUX input, typically located under a protective flap.
- Power Button: Press and hold to power on/off.
- Volume Down (-): Decrease volume.
- Play/Pause Button: Play or pause music. Answer/end calls.
- Volume Up (+): Increase volume.
- Bluetooth Button: Press to enter pairing mode.
- USB-C Charging Port: For charging the speaker.
- AUX Input: For wired audio connection.
3. Setup
3.1 Charging the Speaker
Before first use, fully charge your Tribit XSound Go speaker. Use the provided USB-C cable to connect the speaker to a 5V USB power adapter (not included) or a computer's USB port.
- The LED indicator will show charging status.
- A full charge provides up to 24 hours of continuous playtime.
Image 3.1: Tribit XSound Go speaker connected to a USB-C charging cable. This image demonstrates the Type-C charging port in use.
3.2 Bluetooth Pairing
To connect your speaker to a Bluetooth-enabled device:
- Power on the speaker. The Bluetooth indicator will flash, indicating it's in pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "Tribit XSound Go" from the list.
- Once connected, the Bluetooth indicator will turn solid blue, and you will hear an audible confirmation.
The speaker features Bluetooth 5.3 for stable connectivity up to 150 feet (45 meters).
Image 3.2: Tribit XSound Go speaker on a wooden table, symbolizing its readiness for Bluetooth 5.3 connection.
3.3 True Wireless Stereo (TWS) Pairing
You can pair two Tribit XSound Go speakers for a stereo sound experience. Note: Older versions of the XSound Go may not be compatible with newer versions for TWS pairing.
- Ensure both speakers are powered on and not connected to any other Bluetooth device.
- On one speaker, press and hold the Bluetooth button for 3 seconds. It will enter TWS pairing mode.
- Repeat the action on the second speaker.
- The speakers will automatically connect to each other. Once connected, the main speaker's Bluetooth indicator will flash, and the secondary speaker's indicator will be solid.
- Connect your device to the main speaker via Bluetooth as described in Section 3.2.
Image 3.3: Two Tribit XSound Go speakers placed on a table, demonstrating a True Wireless Stereo (TWS) setup for enhanced audio.
4. Operating Instructions
4.1 Basic Functions
- Power On/Off: Press and hold the Power button.
- Volume Control: Press the '+' or '-' buttons.
- Play/Pause: Press the Play/Pause button once.
- Next Track: Double-press the Play/Pause button.
- Previous Track: Triple-press the Play/Pause button.
- Answer/End Call: Press the Play/Pause button once during an incoming call.
- Reject Call: Press and hold the Play/Pause button during an incoming call.
- Activate Voice Assistant (Siri/Google Now): Press and hold the Play/Pause button when not on a call.
4.2 Customized EQ Modes
The Tribit XSound Go supports customized EQ modes for personalized sound. These can be accessed and adjusted via the Tribit App. Please ensure you have the latest version of the speaker for app compatibility.
Image 4.1: A person interacting with a smartphone app to customize EQ settings for the Tribit XSound Go speaker.
5. Maintenance
5.1 Water Resistance (IPX7)
The Tribit XSound Go is IPX7 waterproof, meaning it can be submerged in water up to 1 meter for 30 minutes. To maintain its waterproof integrity:
- Ensure the rubber flap covering the charging port and AUX input is securely closed before exposure to water.
- Do not expose the speaker to saltwater or other chemicals. If exposed, rinse with fresh water and dry thoroughly.
- Avoid prolonged submersion or use in extreme water pressure.
Image 5.1: The Tribit XSound Go speaker partially submerged in water, showcasing its IPX7 waterproof capability.
5.2 Cleaning and Storage
- Clean the speaker with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for an extended period, charge the battery to approximately 50% every few months to preserve battery life.
6. Troubleshooting
If you encounter issues with your speaker, refer to the following common solutions:
| Problem | Solution |
|---|---|
| Speaker does not power on | Ensure the battery is charged. Connect to a power source and try again. |
| Cannot pair via Bluetooth | Ensure the speaker is in pairing mode (flashing blue LED). Turn off and on your device's Bluetooth. Forget "Tribit XSound Go" from your device's Bluetooth list and re-pair. Ensure no other devices are connected to the speaker. |
| No sound or low volume | Increase volume on both the speaker and your connected device. Ensure the speaker is properly paired. Check if the AUX cable is securely connected if using wired mode. |
| Sound distortion | Reduce the volume on both the speaker and your device. Ensure the speaker is not too far from your device (within Bluetooth range). |
| TWS pairing fails | Ensure both speakers are disconnected from other devices. Follow TWS pairing steps carefully. Note that older and newer versions may not be TWS compatible. |
7. Specifications
Key technical specifications for the Tribit XSound Go speaker:
| Feature | Detail |
|---|---|
| Model Name | XSound Go |
| Item Model Number | BTS38 |
| Brand | Tribit |
| Connectivity Technology | Bluetooth 5.3 |
| Wireless Communication Technology | Bluetooth |
| Speaker Maximum Output Power | 16 Watts |
| Audio Output Mode | Stereo |
| Audio Driver Type | Dynamic Driver |
| Audio Driver Size | 40 Millimeters |
| Bluetooth Range | Up to 150 Feet (45 meters) |
| Power Source | Battery Powered (2 Lithium Ion batteries included) |
| Playtime | Up to 24 Hours |
| Water Resistance Level | IPX7 Waterproof |
| Product Dimensions | 6.7"W x 2.2"D x 2.3"H (17cm x 5.6cm x 5.8cm) |
| Item Weight | 13.7 ounces (0.39 Kilograms) |
| Control Method | Voice, Button |
| Special Features | Built-in XBass Technology, TWS Pairing, Built-in MIC, DSP Chip Integration |
Image 7.1: Visual representation of the Tribit XSound Go speaker's dimensions.
8. Warranty and Support
8.1 Warranty Information
The Tribit XSound Go speaker comes with a limited warranty. Please refer to the warranty card included in your package or visit the official Tribit website for detailed terms and conditions.
8.2 Customer Support
For any questions, technical assistance, or support inquiries, please contact Tribit customer service. You can find contact information and FAQs on the official Tribit website or through their Amazon store page: Tribit Official Store.
9. Safety Information
- Do not disassemble, repair, or modify the product.
- Do not expose the product to fire or high temperatures.
- Keep the product away from strong magnetic fields.
- Use only the specified charging voltage and current.
- Keep out of reach of children.
- Dispose of the product responsibly according to local regulations.
