Introduction
Thank you for choosing the JORREP Cooling Station. This multifunctional stand is designed to enhance your gaming experience by providing efficient cooling for your PlayStation 5 or PS5 Slim console, dual controller charging, additional USB connectivity, and a convenient headset holder. Please read this manual carefully to ensure proper setup and operation.
Package Contents
Verify that all items listed below are included in your package:
- Cooling Stand (x1)
- Removable Panel (x1)
- Installation Guide (x1)
- Headphone Stand (x1)
Figure 1: All components included in the JORREP Cooling Station package.
Product Features
- Wide Compatibility: Supports PS5 Disc/Digital and PS5 Slim Disc/Digital consoles.
- Efficient Cooling: Features a powerful adjustable turbo fan with three speed settings (High, Medium, Low) to dissipate heat.
- Dual Fast Charging: Simultaneously charges two PS5 controllers in approximately 3 hours, with LED indicators for charging status.
- Integrated USB Hub: Includes 3 USB ports for connecting and charging additional external devices.
- Headset Holder: A dedicated hook for convenient storage of your gaming headset.
- Stable and Durable Design: Constructed from sturdy materials to securely hold your console and accessories.
Setup Instructions
1. Console Compatibility Adjustment
The cooling station is compatible with both standard PS5 and PS5 Slim consoles. An adjustable panel is provided to ensure a secure fit.
- For PS5 Standard (2020) consoles (Disc or Digital Edition), keep the removable panel installed in the stand.
- For PS5 Slim (2023) consoles (Disc or Digital Edition), gently remove the adjustable panel from the stand.
Figure 2: Adjusting the panel for PS5 Standard or PS5 Slim compatibility.
2. Attaching the Console to the Stand
- Place your PS5 console onto the cooling stand, aligning the console's base screw hole with the stand's screw.
- Secure the console by tightening the provided screw from the bottom of the stand into the console's base.
3. Attaching the Headset Holder
Insert the headset holder into the designated slot at the top of the console stand.
4. Connecting Power
The cooling station can be powered in two ways:
- Via PS5 Console: Connect the integrated USB cable from the cooling station to a USB port on your PS5 console. This method powers the stand when the console is on.
- Via External AC Adapter: For continuous charging when the console is off, connect the USB cable to a 5V/2A AC adapter (not included) and plug it into a wall outlet.
Figure 3: Powering the cooling station from the PS5 or an external adapter.
Video 1: Overview of the JORREP Cooling Station and basic setup steps.
Operating Instructions
1. Cooling Fan Operation
The cooling station features an adjustable turbo fan to prevent your console from overheating. The fan draws hot air from the bottom of the console and expels it from the sides of the stand.
- Press the FAN button on the front panel to cycle through three fan speeds: Low, Medium, and High.
- Pressing the button a fourth time will turn the fan off.
- Ensure there is adequate space (approximately 1-2 inches) behind and to the sides of the stand for optimal airflow.
Figure 4: Fan speed settings and cooling effectiveness.
Video 2: Demonstration of the cooling fan operation and its quiet performance.
2. Dual Controller Charging
The stand features two dedicated charging docks for your PS5 DualSense controllers.
- Place your controllers into the charging docks. Ensure they are properly seated for charging to begin.
- LED Indicators:
- Red Light: Controller is charging.
- Green Light: Controller is fully charged or in standby mode.
- A full charge for two controllers typically takes approximately 3 hours.
- The integrated smart chip protects against overcharging, overheating, overvoltage, and short circuits.
Figure 5: Controller charging status indicators.
3. USB Hub Functionality
The cooling station includes three additional USB ports for connecting and charging other accessories.
- These ports can be used for charging headsets, other controllers, or connecting external USB devices.
Figure 6: Utilizing the integrated USB hubs for additional devices.
Maintenance
- Regularly wipe the cooling station with a soft, dry cloth to remove dust.
- Ensure the fan vents are clear of obstructions to maintain optimal cooling performance.
- Avoid using harsh chemicals or abrasive cleaners, as these may damage the product's finish.
Troubleshooting
- Fan not operating:
- Check if the USB power cable is securely connected to the console or AC adapter.
- Ensure the console is powered on if drawing power directly from it.
- Press the FAN button to ensure it is not turned off.
- Controllers not charging:
- Verify that the controllers are correctly seated in the charging docks.
- Check the LED indicators; if they are not red, reposition the controller.
- Ensure the cooling station is receiving power (either from the console or an external adapter).
- Console instability:
- Confirm the console is properly secured to the stand with the provided screw.
- Ensure the correct adjustable panel setting is used for your specific PS5 model.
Specifications
| Feature | Detail |
|---|---|
| Model | Cooling Station for PS5 |
| Compatibility | PS5 Disc/Digital, PS5 Slim Disc/Digital |
| Fan Speeds | 3 Levels (Low, Medium, High) |
| Controller Charging Time | Approx. 3 hours for two controllers |
| USB Ports | 3 x USB Hubs |
| Dimensions | 14.92 x 7.99 x 1.73 inches |
| Item Weight | 1.41 pounds |
| Manufacturer | JORREP |
Warranty and Support
For any questions, concerns, or technical support regarding your JORREP Cooling Station, please contact the manufacturer directly through the retailer's platform or the official JORREP website. Please refer to your purchase documentation for specific warranty details.