AODK L-Shaped Gaming Desk Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your AODK L-Shaped Gaming Desk. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

Safety Information

WARNING: This desk requires proper assembly to ensure stability. Do not attempt to assemble the desk without following the provided instructions. The desk is heavy and and should not be lifted by one person alone. The power outlets and USB charging ports should be used with caution to prevent electrical hazards. Do not overload the desk with heavy items as it may tip over. Always ensure the desk is properly anchored to the floor to prevent tipping.

Package Contents

Before beginning assembly, verify that all components listed below are present and in good condition:

• L Shaped Desk
• Storage Shelves
• Power Outlet
• LED Light Strip
• CPU Stand
• Headphone Hook
• Storage Bag
• All necessary assembly tools and hardware

Setup and Assembly

For ease and safety, we recommend two people for assembly. Please take out the parts from the package and check that all parts are included and in good condition. The entire assembly process takes about 45 minutes to 1 hour. There are two ways to install this desk: you can put the L-shelf on the left or right side according to your display needs.

Assembly Video Guide

Step-by-Step Assembly Instructions

1. Install the adjustable foot pads: Attach the adjustable foot pads to the bottom of the desk frames (parts A, B, C). Use screws to connect the horizontal bars (H, I) to the vertical frames.
2. Connect the main desk frames: Connect frames B and C with bars F and G using screws. Pay attention to the positions and orientations of the screw holes. Ensure holes marked on B and C face the same direction. For a right-corner desk, install B on the right side of C; for a left-corner desk, install B on the left side of C.
3. Assemble the L-shaped frame: Use screws to connect frames A and B with bars D and E. Pay attention to the positions and orientations of the screw holes.
4. Install support bars: Use screws and nuts to install the diagonal support bars (S and R) to the assembled frame for added stability.
5. Install CPU stand: Use screws to install the CPU stand (T) to the designated frame. Do not install foot pads on part L (CPU stand side supports).
6. Attach desktop panels: Use screws to install the desktop panels (M and N) onto the assembled frame.
7. Install fabric bag and iron hook: Screw through the cloth bag (U) or hook (11) and directly into the steel frame. Having screw holes on either the front or back is considered normal, as the desk is designed for reversible installation.
8. Install desktop shelf supports: Use screws and nuts to install the vertical supports (J) for the desktop shelf.
9. Install desktop shelf crossbar: Use screws to install the crossbar (K) to the top of the desktop shelf supports.
10. Assemble desktop shelf panels: Use screws to install the shelf panels (P) onto the base panel (O).
11. Install desktop shelves: Use screws to install the assembled shelf panels (P&O) onto the supports (K). If the steel frame is rather tight, loosen the installation screws on part K for adjustment. O and P can be mounted at different heights to meet different user needs.
12. Install top desktop shelf: Use screws to install the top shelf (Q) onto the desktop shelf supports.
13. Install power outlet: Use screws to install the power outlet (12) to the designated area on the desk.
14. Install light strip: Install the light strip (13) on the shelf. The light strip can be attached to any position according to personal preference, and the strap (14) is used to fix the wires of the light strip.

Operating Instructions

LED Light Strip

The gaming desk features an LED strip with 10 static colors, 8 brightness grades, 10 dynamic modes, and a memory function. Use the switching controls to adjust the lighting. Adjusting to the proper lighting can reduce eye strain, improve focus, and create a comfortable workspace or gaming space.

The LED light strip offers various color and mode options, controlled by an inline switch.

Power Outlets & Charging Ports

The AODK computer desk is equipped with 3 power outlets and 2 USB charging ports. These allow for easy and convenient charging of smartphones, gaming gear, and Bluetooth devices while working or gaming. The power cord is designed to allow flexible placement of the desk.

The desk features a built-in power strip for convenient device charging.

Reversible L-Shape Configuration

The L-shaped desk is reversible, allowing the top hutch and the L-section to be fixed on either the left or right side. This maximizes space and adapts to various room layouts, making it ideal for corner spaces.

The desk can be configured for either a left or right L-shape to suit your space.

Maintenance

To maintain the quality and appearance of your desk, wipe it with a damp cloth as needed. Avoid using harsh chemicals or abrasive cleaners.

Specifications

Warranty and Support

Your AODK L-Shaped Gaming Desk comes with a Limited Warranty. If your AODK desk arrives damaged, missing parts, or scratched, our professional customer support team will help you solve the problem within 24 hours. Please refer to your purchase documentation for specific warranty terms and contact information.