Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Riobel TAA39 Arca Floor Mounted Tub Filler with Hand Shower. Please read all instructions carefully before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.
The Riobel TAA39 Arca tub filler is constructed from brass, offering resistance to corrosion and suitability for high temperatures. It features a single handle for operation, an integrated diverter, and includes a hand shower.
Safety Information
Observe the following safety precautions during installation and use:
- Always turn off the main water supply before beginning any installation or maintenance.
- Wear appropriate personal protective equipment, such as safety glasses and gloves.
- Ensure all local plumbing and building codes are followed.
- If you are unsure about any part of the installation process, consult a qualified professional plumber.
- Do not use abrasive cleaners or harsh chemicals on the product finish.
- Keep small parts away from children.
Package Contents
Verify that all components are present before beginning installation:
- Riobel TAA39 Arca Floor Mounted Tub Filler
- Hand Shower
- Handles (1 included)
- Mounting hardware
- Instruction Manual
Note: A rough-in valve is not included and must be purchased separately.
Setup and Installation
Professional installation by a licensed plumber is recommended for this floor-mounted tub filler.
Pre-Installation Steps:
- Turn off the main water supply to the installation area.
- Clear the installation area and ensure sufficient space for the tub filler.
- Inspect all components for any damage. Do not install if parts are damaged.
- Ensure the rough-in valve (not included) is properly installed according to its manufacturer's instructions and local codes. This tub filler requires a single-hole installation.
Installation Procedure:
- Connect the hot and cold water supply lines to the rough-in valve according to the valve manufacturer's instructions.
- Secure the tub filler body to the floor using the provided mounting hardware. Ensure it is stable and level.
- Connect the tub filler's water inlet lines to the rough-in valve outlets.
- Attach the hand shower hose to the designated connection point on the tub filler.
- Install the single handle onto the valve stem.
- Once all connections are secure, slowly turn on the main water supply and check for leaks.
- Test the operation of the tub filler and hand shower.
Operating Instructions
Tub Filler Operation:
- To turn on the water, rotate the single handle.
- Adjust the water temperature by rotating the handle to the desired hot or cold position.
- Adjust the water flow by moving the handle up or down.
- To turn off the water, return the handle to the closed position.
Hand Shower and Diverter Operation:
- To divert water from the tub spout to the hand shower, locate the integrated diverter on the tub spout and activate it.
- Ensure the hand shower is securely placed in its holder when not in use.
- After using the hand shower, deactivate the diverter to return water flow to the tub spout.
Maintenance
Cleaning the Finish:
- Clean the Brushed Gold finish regularly with a soft, damp cloth.
- Use only mild soap and water if necessary. Rinse thoroughly and dry with a soft cloth to prevent water spots.
- Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, or any cleaners containing bleach, acids, or alcohol, as these can damage the finish.
General Care:
- Periodically check all connections for tightness. Do not overtighten.
- If the water flow decreases, check the aerator for mineral buildup and clean as needed.
Troubleshooting
Before contacting customer service, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water flow | Aerator clogged with debris or mineral buildup; partially closed shut-off valves; low water pressure in the household. | Clean or replace aerator; ensure shut-off valves are fully open; consult a plumber for household water pressure issues. |
| Leaks at connections | Loose connections; damaged O-rings or gaskets. | Tighten connections (do not overtighten); replace O-rings or gaskets if damaged. |
| Water does not divert to hand shower | Diverter mechanism stuck or faulty. | Ensure diverter is fully engaged; if issue persists, contact customer support. |
| Water temperature inconsistent | Water heater issues; faulty cartridge. | Check water heater settings; if problem persists, the cartridge may need replacement by a professional. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | TAA39 |
| Brand | Riobel |
| Finish Type | Brushed Gold |
| Material | Brass |
| Mounting Type | Floor Mount |
| Number of Handles | 1 |
| Height | 40 inches (bottom to top of faucet) |
| Spout Height | 33-1/8 inches (deck to spout outlet) |
| Spout Reach | 9-7/8 inches (center of faucet body to center of spout outlet horizontally) |
| Flow Rate (Tub Filler) | 6 gallons-per-minute |
| Flow Rate (Hand Shower) | 1.8 gallons-per-minute |
| Number of Faucet Holes | 1 (minimum required) |
| Item Weight | 17.3 pounds |
| UPC | 883186545226 |
Warranty and Support
This Riobel product is covered under Riobel's limited warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty documentation provided with your purchase or visit the official Riobel website.
For technical assistance, replacement parts, or further inquiries, please contact Riobel customer support. Contact information can typically be found on the Riobel website or in your product packaging.