Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your MARVO M808W Wireless Mouse. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Product Overview
The MARVO M808W is a versatile wireless mouse designed for various computing tasks. It features adjustable DPI settings, programmable buttons, and RGB backlighting for an enhanced user experience.
Key Features:
- Up to 1600 DPI for precise tracking.
- 6 Programmable Buttons for customized functions.
- RGB Backlight with 7 colors.
- Dual Mode Connectivity: Bluetooth 5.1 and 2.4G wireless.
- Polling rate up to 100Hz.
- Built-in 3.7V-400mAh rechargeable battery.
- Type-C Charge Cable (80cm included).
Components:
Figure 1: Top-down view of the MARVO M808W Wireless Mouse with its transparent casing, revealing the internal components and the USB receiver stored within.
Figure 2: Angled view of the MARVO M808W Wireless Mouse, showcasing the scroll wheel, primary buttons, and the transparent design that reveals the internal electronics.
Figure 3: Side profile of the MARVO M808W Wireless Mouse, illustrating its low-profile design and the illuminated RGB strip.
Setup Instructions
1. Charging the Mouse:
- Connect the provided Type-C charging cable to the charging port on the front of the mouse.
- Connect the other end of the cable to a USB power source (e.g., computer USB port, USB wall adapter).
- The RGB lighting will indicate charging status. Charge the mouse fully before first use.
2. Connecting the Mouse:
The MARVO M808W supports two wireless connection modes: 2.4G via USB receiver and Bluetooth 5.1.
2.1. 2.4G Wireless Connection:
- Locate the USB receiver stored in the compartment on the underside of the mouse.
- Plug the USB receiver into an available USB port on your computer.
- Turn on the mouse using the power switch located on the underside.
- The mouse should automatically connect to your computer. If not, press the mode switch button (usually on the underside) to select 2.4G mode.
2.2. Bluetooth 5.1 Connection:
- Turn on the mouse using the power switch.
- Press the mode switch button on the underside of the mouse to select Bluetooth mode. The indicator light will flash, indicating it's in pairing mode.
- On your computer or device, navigate to Bluetooth settings.
- Search for new devices and select "MARVO M808W" from the list.
- Follow any on-screen prompts to complete the pairing process.
Operating Instructions
1. DPI Adjustment:
The MARVO M808W features adjustable DPI settings. Use the DPI button (typically located behind the scroll wheel) to cycle through available DPI levels (e.g., 800/1200/1600 DPI). The RGB lighting may change to indicate the current DPI setting.
2. Programmable Buttons:
The mouse is equipped with 6 buttons. The primary left and right click, scroll wheel click, and two side buttons are typically programmable. Refer to the MARVO official website or software (if available) for instructions on how to customize these buttons.
3. RGB Backlight Control:
The mouse features a 7-color RGB backlight. Specific buttons or button combinations may control the lighting effects or turn them on/off. Consult the product's quick start guide or MARVO's support resources for detailed instructions on backlight customization.
Maintenance
Cleaning:
- Ensure the mouse is turned off before cleaning.
- Use a soft, dry cloth to wipe the surface of the mouse.
- For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid excessive moisture.
- Do not use harsh chemicals, solvents, or abrasive materials, as these can damage the mouse's finish or internal components.
Storage:
When not in use for extended periods, store the mouse in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the battery is partially charged to maintain its health.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Mouse not responding. |
|
| Cursor movement is erratic or slow. |
|
| RGB backlight is not working. |
|
Specifications
| Model | M808W |
| Brand | MARVO |
| Connectivity Technology | Bluetooth 5.1, 2.4G Wireless |
| Operating Range | 10m |
| Sensor Type | Optical |
| DPI Settings | Up to 1600 DPI (Adjustable) |
| Buttons | 6 Programmable Buttons |
| Backlight | 7-color RGB |
| Polling Rate | Up to 100Hz |
| Battery Specification | 3.7V-400mAh (Rechargeable) |
| Charging Cable | Type-C, 80cm |
| Compatible Devices | PC |
Warranty and Support
Manufacturer's Warranty:
This MARVO M808W Wireless Mouse comes with a 1-Year Manufacturer's Warranty. Please retain your proof of purchase for warranty claims.
Customer Support:
For technical assistance, warranty inquiries, or further information, please visit the official MARVO website or contact their customer support channels. Contact details can typically be found on the product packaging or MARVO's official support page.
