Product Overview
The DT Systems 500RT Dog Training Collar is a waterproof, rechargeable e-collar designed for effective dog training. It features a 500-yard range, 15 adjustable intensity levels, and includes beep and vibration modes. This system is suitable for small to large dogs weighing between 7 to 85 lbs.
The collar utilizes Maxx-Range digital technology with a built-in woven antenna for reliable communication and 360-degree signal reception. The durable, weather-resistant transmitter includes an intensity dial lock mode and a built-in safety shut-off system.
Image: DT Systems 500RT Dog Training Collar with Remote, showing the transmitter, collar receiver, and product packaging.
Setup and Initial Use
Package Contents
- Collar Receiver
- Battery Charger (for collar receiver battery)
- Transmitter (requires 9V battery, not included)
- Test Light
- Owner’s Manual
- Basic Obedience Training Book
Installing the Transmitter Battery
The transmitter requires one 9V battery (not included). Open the battery compartment on the back of the transmitter and insert a new 9V battery, observing correct polarity. Close the compartment securely.
Image: DT Systems 500RT Remote Transmitter, showing the 9V battery requirement.
Charging the Collar Receiver
The collar receiver contains a rechargeable quick-charge battery. Connect the provided battery charger to the collar receiver's charging port. The SmartLED indicator will show charging status. A full charge typically takes 2-3 hours.
WARNING: DO NOT CHARGE WHILE THE UNIT IS WET!
Image: DT Systems 500RT Collar Receiver, highlighting the quick-charge feature.
Fitting the Collar
Proper collar fit is crucial for effective and safe operation. Position the collar high up on your dog's neck, close to their head, ensuring the receiver box is directly beneath the chin. Avoid placing the collar on the broader part of the neck, as it may loosen during movement.
Adjust the collar so that you can comfortably slide two fingers between the collar and your dog's neck. The fit should be snug enough to ensure consistent skin contact with the electrodes without restricting breathing.
Image: A dog wearing the DT Systems 500RT collar, demonstrating correct placement and fit.
WARNING: Do not cut the part of the Collar Belt that has the embedded antenna. Doing so will damage the antenna and may result in decreased Collar Receiver range.
Important Safety Notes
- Before using the e-collar, familiarize yourself with its functions and appropriate training methods.
- Limit collar use to no more than 12 hours daily to prevent skin irritation.
- Rotate the collar's position on your dog's neck each day.
- Regularly clean the electrodes with mild soap to prevent irritation.
Operating the DT Systems 500RT
Transmitter Controls
- Intensity Dial: Adjusts the stimulation level from 1 to 15. The dial can be locked to prevent accidental changes.
- B/V Button: Activates the Beep or Vibration mode.
- C Button: Activates Continuous Stimulation. The system includes a built-in safety shut-off.
Image: DT Systems 500RT Remote Transmitter, detailing its control buttons and intensity dial.
Collar Receiver Functions
The collar receiver is completely waterproof, making it suitable for various training environments, including wet conditions. It features a 500-yard range, allowing for training over significant distances. The patented 360-degree signal reception ensures consistent communication with the transmitter.
Image: DT Systems 500RT Collar Receiver, submerged in water, demonstrating its waterproof capability.
Image: A dog enjoying water, illustrating the waterproof design of the DT Systems 500RT collar for use in rain, swimming, or baths.
Maintenance and Care
Collar Care
- To prevent skin irritation, limit the collar's use to a maximum of 12 hours per day.
- Rotate the position of the collar on your dog's neck daily.
- Regularly clean the electrodes on the collar receiver with mild soap and water to maintain hygiene and prevent skin issues.
- Ensure the collar belt's embedded antenna is not cut or damaged, as this can reduce the collar's range and effectiveness.
Battery Care
- Always ensure the collar receiver is completely dry before connecting it to the charger.
- Store the transmitter and collar in a dry place when not in use.
Troubleshooting Guide
| Issue | Possible Solution |
|---|---|
| Collar not responding to remote. | Ensure the transmitter has a fresh 9V battery. Check that the collar receiver is fully charged. Verify the collar is properly fitted to ensure consistent skin contact with the electrodes. Ensure the collar antenna is intact and not damaged. |
| Inconsistent stimulation or signal. | Adjust the collar fit to ensure snug contact. Check for any obstructions between the transmitter and receiver. Ensure the collar antenna is not damaged. Environmental factors or distance may also affect signal strength. |
| Collar not charging. | Ensure the charging cable is securely connected to both the collar and the power source. Verify the collar is completely dry before charging. If issues persist, contact customer support. |
| Skin irritation on dog's neck. | Limit collar use to no more than 12 hours daily. Rotate the collar's position on the dog's neck each day. Regularly clean the electrodes with mild soap and water. Consult a veterinarian if irritation persists. |
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | 500RT |
| Product Dimensions | 22 x 7 x 0.04 inches |
| Item Weight | 1.01 Pounds (456 Grams) |
| Range | Up to 500 yards |
| Training Levels | 15 adjustable intensity levels |
| Training Modes | Beep, Vibration, Continuous Stimulation |
| Collar Receiver Battery | Rechargeable Lithium Polymer (Quick-charge) |
| Transmitter Battery | 1 x 9V battery (not included) |
| Waterproof Rating | Collar: Completely waterproof; Transmitter: Weather-resistant |
| Adjustable Collar Size | 7 to 22 inches |
| Recommended Dog Weight | 7 to 85 lbs |
| Manufacturer | D.T. Systems |
Warranty and Customer Support
Warranty Information
The DT Systems 500RT Dog Training Collar comes with a 1-Year Manufacturer Warranty. Please retain your proof of purchase for warranty claims.
Customer Support
For any questions, assistance with setup, operation, or troubleshooting, please contact DT Systems' US-based customer service. Our team is available to provide support and answer your training queries.
Refer to the contact information provided in your product packaging or visit the official DT Systems website for further details.