Gettimore Z04O9K52447YIXX61XQW8N7T

Download PDF
Contents

Gettimore Skimmer Cuff Adapter User Manual

Model: Z04O9K52447YIXX61XQW8N7T

Introduction

This user manual provides comprehensive instructions for the Gettimore Conical Adapter, a replacement component designed for pool skimmer cuffs. This adapter facilitates a secure and efficient connection between your pool cleaner hose and the skimmer. It is compatible with various pool cleaning systems, including those requiring part numbers W70263, W63900, and K12110.

Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

Gettimore Conical Adapter

Image: A single Gettimore conical adapter, white, shown from a slightly angled perspective, highlighting its ribbed design and flared ends.

Safety Information

Always observe the following safety precautions:

  • Ensure the pool pump is turned off before attempting any installation or maintenance on pool equipment.
  • Wear appropriate personal protective equipment (PPE) if necessary, such as gloves.
  • Keep out of reach of children.
  • Do not use the adapter for purposes other than its intended use.
  • Inspect the adapter for any damage before each use. Do not use if cracked or broken.

Package Contents

Verify that all items are present in the package:

  • Gettimore Conical Adapter(s) (Quantity: 1 or 2, depending on purchase)
Two Gettimore Conical Adapters

Image: Two Gettimore conical adapters displayed together, with smaller inset images showing a side profile and an angled view of a single adapter.

Setup and Installation

Follow these steps to properly install the Gettimore Conical Adapter:

  1. Turn off Pool Pump: Before beginning, ensure your pool pump system is completely turned off to prevent accidental operation and ensure safety.
  2. Locate Skimmer Cuff: Identify the skimmer cuff where the pool cleaner hose connects. This is typically located inside the skimmer basket area.
  3. Remove Old Adapter (if applicable): If replacing an existing adapter, carefully detach it from the skimmer cuff and the pool cleaner hose.
  4. Attach to Pool Cleaner Hose: Insert the narrower, ribbed end of the Gettimore Conical Adapter into the end of your pool cleaner hose. Ensure a snug fit.
  5. Connect to Skimmer Cuff: Insert the wider, flared end of the adapter into the skimmer cuff opening. Push firmly until it is securely seated. The conical design ensures a tight seal.
  6. Verify Connection: Gently tug on the hose to confirm that the adapter is firmly connected to both the hose and the skimmer cuff. There should be no wobbling or looseness.
  7. Restart Pool Pump: Once the adapter is securely installed, you may restart your pool pump and resume normal pool cleaning operations.

Operating Instructions

The Gettimore Conical Adapter is a passive component designed to facilitate the connection between your pool cleaner hose and the skimmer. Once installed, its operation is integrated with your pool cleaning system.

  • Ensure the adapter remains securely connected during pool cleaner operation.
  • Monitor the connection periodically for any signs of leakage or detachment.

Maintenance

Proper maintenance will extend the life of your Gettimore Conical Adapter:

  • Regular Inspection: Periodically inspect the adapter for signs of wear, cracks, or damage, especially around the connection points.
  • Cleaning: If debris or mineral buildup occurs, remove the adapter and clean it with mild soap and water. Rinse thoroughly.
  • Storage: If removing the adapter for extended periods (e.g., during off-season), store it in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

Problem Possible Cause Solution
Adapter leaks at connection point. Adapter not fully seated; damaged adapter; incompatible hose/skimmer cuff. Ensure adapter is pushed firmly into both the hose and skimmer cuff. Inspect for cracks; replace if damaged. Verify compatibility with your specific pool cleaner hose and skimmer cuff.
Hose detaches from adapter during operation. Loose connection; worn hose end; excessive pressure. Re-seat the hose firmly onto the adapter. Inspect the hose end for wear; trim if necessary. Check pool pump pressure settings.
Adapter does not fit. Incorrect adapter model; incompatible skimmer cuff/hose. Verify the adapter model number (Z04O9K52447YIXX61XQW8N7T) and compatibility with W70263, W63900, or K12110 skimmer cuffs.

Specifications

  • Product Name: Conical Adapter Valve Sleeve
  • Brand: Gettimore
  • Model Number: Z04O9K52447YIXX61XQW8N7T
  • OEM Part Numbers Replaced: W70263, W63900, K12110
  • Material: Plastic
  • Color: As pictured (typically white)
  • Dimensions: Approximately 10 x 6 x 6 cm (L x W x H)
  • Compatibility: Designed for use with all in-ground pool cleaners, including those from Zodiac and Hayward, that utilize the specified skimmer cuff part numbers.

Warranty and Support

Information regarding specific warranty terms for the Gettimore Conical Adapter is not provided in this manual. Please refer to your purchase documentation or contact the retailer for warranty details.

For technical support or further assistance, please contact the seller or manufacturer through the platform where the product was purchased.

© 2024 Gettimore. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.