Introduction
This manual provides detailed instructions for the safe and efficient use of your Lindby Leia Modern Floor Lamp. Please read all instructions carefully before assembly and operation. Keep this manual for future reference.
Safety Information
WARNING: Always disconnect the lamp from the power supply before cleaning, changing the bulb, or performing any maintenance.
- Ensure the power supply voltage matches the lamp's requirements (230V).
- Do not use bulbs exceeding the specified wattage (1 x 15W LED).
- This lamp is designed for indoor use only (IP20).
- Keep away from water and moisture.
- Do not attempt to modify the lamp. Any modifications may void the warranty and pose a safety risk.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
Setup
1. Unpacking
Carefully remove all components from the packaging. Inspect for any damage. Retain packaging materials for potential future transport or returns.
2. Assembly
The Lindby Leia floor lamp typically requires minimal assembly. Follow these general steps:
- Attach the main pole sections together, ensuring they are securely tightened.
- Connect the lamp head to the adjustable arm.
- Secure the adjustable arm to the base. Ensure all connections are firm.
- Place the lamp on a stable, level surface.
Image Description: A technical drawing of the Lindby Leia floor lamp, illustrating its overall dimensions including height (180 cm), width (84.5 cm), and lamp head diameter (38 cm). The diagram also shows the base diameter (34 cm) and the length of the power cable (250 cm) with the integrated foot switch.
3. Bulb Installation
This lamp uses an E27 fitting.
- Ensure the lamp is unplugged from the power outlet.
- Carefully screw an E27 LED bulb (maximum 15W) into the lamp holder. Do not overtighten.
- Plug the lamp into a suitable power outlet.
Image Description: A detailed view of the lamp head's interior, showing the E27 bulb socket. This image helps in understanding where to install the light bulb.
Operating Instructions
1. Power On/Off
The Lindby Leia floor lamp is equipped with a convenient foot switch located on the power cable.
- To turn the lamp ON, gently press the foot switch.
- To turn the lamp OFF, press the foot switch again.
Image Description: A close-up photograph of the black, circular foot switch integrated into the power cable of the lamp, demonstrating its design and location for operation.
2. Adjusting the Lamp Head
The lamp head can be flexibly rotated to direct light as desired.
- Gently grasp the lamp head and pivot it to the desired angle.
- The adjustable arm also allows for changes in the lamp's overall reach and height.
Image Description: The Lindby Leia floor lamp positioned next to a sofa in a living room, demonstrating its functional use and how its adjustable arm extends over the seating area to provide illumination.
Maintenance
1. Cleaning
To maintain the appearance and functionality of your lamp:
- Ensure the lamp is unplugged before cleaning.
- Wipe the lamp with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or polishing agents as these may damage the finish.
2. Bulb Replacement
When the bulb needs replacement:
- Unplug the lamp from the power outlet.
- Allow the old bulb to cool completely before touching it.
- Carefully unscrew the old E27 bulb.
- Screw in a new E27 LED bulb (maximum 15W).
- Plug the lamp back into the power outlet.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Light flickers. |
|
|
Specifications
- Model: Leia
- Brand: Lindby
- Material: Other metal
- Color: Silver, Black
- Dimensions (L x W x H): 38 cm x 84.5 cm x 180 cm
- Weight: 11.5 kg
- Fitting: E27
- Light Source: 1 x 15 W LED (max)
- Mains Voltage: 230 V
- Supply Voltage: 230 V
- IP Code: IP20 (Indoor use only)
- Protection Class: II
- Manufacturer Reference: 10017713
- ASIN: B0CXJBCJCX
- Country of Origin: China
Warranty and Support
Lindby products are manufactured to high-quality standards. For any questions regarding your product, please contact the seller directly via their profile on the purchase platform.
The product is covered by standard consumer warranty as per local regulations. Please retain your proof of purchase for warranty claims.
