1. Introduction
Thank you for choosing the Arwibon GT08 Electric Scooter. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your scooter. Please read this manual thoroughly before your first ride to ensure proper use and to maximize your riding experience.
The Arwibon GT08 is designed for both city commuting and off-road adventures, featuring powerful dual motors, a long-range battery, and robust shock absorption for a comfortable and dynamic ride.
2. Safety Guidelines
Your safety is paramount. Always adhere to the following guidelines:
- Always wear a helmet and appropriate safety gear (knee pads, elbow pads, gloves) when riding.
- Do not ride under the influence of alcohol or drugs.
- Familiarize yourself with local laws and regulations regarding electric scooter use.
- Perform a pre-ride inspection: check brakes, tire pressure, and battery level.
- Maintain a safe speed and distance from other vehicles and pedestrians.
- Avoid riding in heavy rain, snow, or icy conditions.
- Do not attempt stunts or extreme maneuvers.
- Ensure all components are securely fastened before each ride.
3. Product Overview and Components
The Arwibon GT08 Electric Scooter is equipped with advanced features for performance and safety. Below is an overview of its main components.
Figure 3.1: Full view of the Arwibon GT08 Electric Scooter. This image shows the overall design, including the handlebars, deck, wheels, and seat.
Figure 3.2: Detailed diagram of the handlebar controls. This image labels the small meter, LCD display, crank handle, gear buttons, start button, refueling button, light switch, turn signal switch, horn switch, high beam (headlights), key lock, speed limit switch, and single/dual drive switches.
Figure 3.3: Close-up views of the braking system, lighting, and shock absorption. This image highlights the rear oil brake, front disc brake, headlights, turn signals, and the robust shock absorption system.
Included Components:
- Arwibon GT08 Electric Scooter
- Charger
- User Manual (this document)
- Paster
- Brake pads
- Bag
4. Setup and First Use
4.1 Unboxing and Assembly
- Carefully remove all components from the packaging.
- Unfold the scooter by releasing the quick folding mechanism. Ensure the stem is securely locked in the upright position.
- Attach the handlebars if they are not pre-installed. Ensure all screws are tightened.
- Install the detachable seat if desired. Adjust its height for comfortable riding.
4.2 Initial Charging
Before your first ride, fully charge the scooter's battery. The charging time is approximately 6 hours.
- Locate the charging port on the scooter.
- Connect the charger to the scooter, then plug the charger into a standard wall outlet.
- The indicator light on the charger will change (e.g., from red to green) when charging is complete.
- Do not overcharge the battery. Disconnect the charger once fully charged.
5. Operating Instructions
5.1 Starting and Riding
- Insert the key into the key lock and turn it to the ON position.
- Press the Start button to power on the scooter.
- The LCD display will show speed, battery life, and speed patterns.
- To accelerate, gently twist the crank handle (throttle).
- Use the single/dual drive switches to select your preferred motor mode. Dual motor provides maximum power.
- Adjust the handlebar height as needed for comfortable riding posture.
5.2 Braking
The GT08 features a dual braking system for effective stopping power.
- Apply both the front disc brake and rear oil brake simultaneously for optimal braking performance.
- Brake smoothly to avoid sudden stops, especially at high speeds.
5.3 Lighting System
Ensure visibility during night riding with the advanced lighting system.
- Use the light switch to turn on the headlights and taillights.
- Activate the turn signal switch when making turns to indicate your direction to others.
- Brake lights will illuminate automatically when brakes are applied.
5.4 Folding the Scooter
The scooter can be quickly folded for transport or storage.
- Ensure the scooter is powered off.
- Locate and release the quick folding mechanism on the stem.
- Carefully fold the stem down towards the deck until it locks into place.
- If the seat is installed, it can also be folded or detached for more compact storage.
Figure 5.1: Dimensions of the Arwibon GT08 Electric Scooter in both unfolded and folded states, illustrating its compact storage capability.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Arwibon GT08 scooter.
6.1 Cleaning
- Wipe the scooter with a damp cloth after each use. Avoid using high-pressure water jets.
- Do not use abrasive cleaners or solvents that could damage the finish or electronic components.
6.2 Battery Care
- Charge the battery regularly, even if the scooter is not in use for extended periods (at least once a month).
- Store the scooter in a cool, dry place, away from direct sunlight and extreme temperatures.
- Use only the original charger provided with the scooter.
6.3 Tire and Brake Inspection
- Regularly check tire pressure and inflate to the recommended PSI (refer to tire sidewall for details).
- Inspect tires for wear, punctures, or damage.
- Check brake pads for wear and replace them as needed. The included brake pads can be used for replacement.
- Ensure brake levers operate smoothly and provide adequate stopping power.
6.4 General Inspection
- Periodically check all screws and bolts for tightness.
- Inspect the suspension system for any signs of damage or leaks.
7. Troubleshooting
This section addresses common issues you might encounter with your Arwibon GT08 scooter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Scooter does not power on. | Battery is depleted; Key is not in ON position; Loose connections. | Charge the battery; Ensure key is turned to ON; Check all cable connections. |
| Reduced range or power. | Low battery charge; Overloaded scooter; Tire pressure too low. | Fully charge the battery; Do not exceed max load (440 lbs); Inflate tires to correct pressure. |
| Brakes feel weak. | Worn brake pads; Loose brake cable; Air in hydraulic system (rear oil brake). | Replace brake pads; Adjust brake cable tension; Consult a professional for hydraulic brake bleeding. |
| Unusual noises during operation. | Loose components; Debris in wheels/motor; Worn bearings. | Inspect and tighten all fasteners; Clean wheels and motor area; If noise persists, seek professional service. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | GT08 |
| Brand | Arwibon |
| Motor Power | Dual 2800W (Total 5600W) |
| Max Speed | Up to 46 MPH |
| Battery | 60V 27Ah Lithium-ion |
| Max Range | Up to 43 Miles |
| Charging Time | 6 Hours |
| Max Load | 440 Pounds |
| Max Climb Angle | 50° |
| Tires | 11-inch Vacuum Off-Road Tires |
| Braking System | Front Disc Brake, Rear Oil Brake |
| Suspension | Front Spring Shock Absorbers, Rear Hydraulic Shock Absorbers |
| Frame Material | Aluminum |
| Item Weight | 88.4 Pounds |
| Product Dimensions (Unfolded) | 59"L x 46.4"W x 28.7"H |
| Recommended Uses | Off Road, Commuting |
9. Warranty Information
The Arwibon GT08 Electric Scooter comes with a limited warranty.
- Warranty Type: Limited
- Warranty Period: Half a year (6 months)
Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
10. Customer Support
For any questions, concerns, or technical assistance, please contact Arwibon customer support.
- Response Time: We provide 24-hour quick reply support.
- Replacement Parts: You can message us on Amazon to inquire about purchasing replacement parts. We will provide the necessary links.
Please have your product model (GT08) and purchase details ready when contacting support to facilitate a quicker resolution.
