HOMCOM CA831-691V00GY0231

Download PDF
Contents

HOMCOM 39-inch Grey Velvet Upholstered End of Bed Bench Instruction Manual

Model: CA831-691V00GY0231

1. Introduction

This manual provides essential instructions for the assembly, use, and maintenance of your HOMCOM 39-inch Grey Velvet Upholstered End of Bed Bench. Please read all instructions carefully before assembly and retain this manual for future reference.

HOMCOM 39-inch Grey Velvet Upholstered End of Bed Bench in a bedroom setting.

Image 1.1: The HOMCOM 39-inch Grey Velvet Upholstered End of Bed Bench.

2. Safety Information

  • Weight Limit: Do not exceed the maximum weight capacity of 264 lbs (120 kg). Overloading may cause damage or injury.
  • Assembly: Ensure all components are securely fastened before use. Improper assembly can lead to instability.
  • Placement: Place the bench on a flat, stable surface. Avoid uneven floors to prevent tipping.
  • Children: Keep small parts away from children during assembly. Do not allow children to climb or play on the bench unsupervised.
  • Protective Foot Pads: The bench is equipped with protective foot pads to prevent floor scratching. Ensure they are properly installed and adjusted.

3. Package Contents

Verify that all parts are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

  • 1 x Upholstered Bench Top
  • 4 x Steel Legs
  • 1 x Hardware Pack (screws, washers, Allen key)
A brown cardboard box with the HOMCOM logo and '1x PACKAGE' indicating a single package delivery.

Image 3.1: The product is delivered in one package.

4. Setup and Assembly Instructions

Assembly of this bench is straightforward and typically requires only attaching the legs.

  1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
  2. Attach Legs: Align each steel leg with the pre-drilled holes on the underside of the bench top. Insert the screws provided in the hardware pack and tighten them using the Allen key. Ensure all four legs are firmly attached.
  3. Adjust Foot Pads: The protective foot pads at the bottom of each leg can be rotated to adjust for minor unevenness in the floor, ensuring the bench is stable and level.
  4. Final Check: Once all legs are attached and adjusted, gently test the stability of the bench before full use.
Close-up of the bench's underside showing sturdy steel legs and protective foot pads.

Image 4.1: Detail of the sturdy steel legs and protective foot pads.

5. Operating and Usage Instructions

Your HOMCOM bench is designed for versatile use in various settings:

  • End of Bed Bench: Position at the foot of your bed for a convenient spot to sit, store extra blankets, or as a decorative accent. Please measure your bed width before purchasing to ensure compatibility.
  • Entryway Bench: Use in your hallway or entryway as a place to sit while putting on or taking off shoes.
  • Additional Seating: Provides extra seating in living rooms, dining rooms, or other areas when entertaining guests.
  • Footrest: Can serve as a comfortable footrest in a lounge area.
Collage showing the bench used as an end-of-bed bench, hallway bench, and shoe stool.

Image 5.1: Examples of versatile use for the bench.

Diagram illustrating the bench dimensions (100 cm length) and how to measure bed width for compatibility with single, double, and queen size beds.

Image 5.2: Important note on measuring bed width for proper fit.

6. Maintenance and Care

To ensure the longevity and appearance of your bench, follow these care guidelines:

  • Cleaning: For general cleaning, gently wipe the velvet-feel fabric with a soft, damp cloth. For spills, blot immediately with a clean, dry cloth. Avoid harsh chemicals or abrasive cleaners.
  • Dusting: Regularly dust the bench with a soft brush or vacuum with an upholstery attachment to prevent dust buildup.
  • Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading of the fabric.
  • Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.

7. Troubleshooting

  • Wobbly Bench: If the bench feels unstable, check that all leg screws are tightened. Adjust the rotating foot pads on the bottom of each leg to level the bench on uneven surfaces.
  • Scratches on Floor: Ensure the protective foot pads are securely attached to the bottom of each leg. If they are worn, consider replacing them.
  • Fabric Stains: Refer to the cleaning instructions in Section 6. For stubborn stains, professional upholstery cleaning may be required.

8. Specifications

FeatureDetail
Model NumberCA831-691V00GY0231
Overall Dimensions (L x W x H)39.4" x 14.2" x 17.7" (100 x 36 x 45 cm)
ColorGrey
Upholstery MaterialPolyester (Velvet-feel fabric)
Frame MaterialAlloy Steel
Item Weight7.3 kg
Weight Capacity264 lbs (120 kg)
Special FeaturesTufted, Upholstered, Protective Foot Pads
Detailed diagram showing the dimensions of the bench: 39.4 inches (100 cm) length, 14.2 inches (36 cm) width, and 17.7 inches (45 cm) height.

Image 8.1: Detailed product dimensions.

9. Warranty and Support

For warranty information or customer support regarding your HOMCOM bench, please refer to the purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.