1. Product Overview
The ARGENDON Shield 85P is a high-capacity commercial dehumidifier designed for effective moisture removal in large spaces. It features an integrated pump for continuous drainage and is suitable for various environments including crawl spaces, basements, warehouses, and job sites.
Image: The ARGENDON Shield 85P commercial dehumidifier, showing its compact design and handles.
Key Features:
- High Capacity: Removes up to 180 pints of moisture per day (maximum) or 85 pints per day (AHAM standard).
- Large Coverage: Effective for areas up to 2,300 square feet.
- Integrated Pump: Built-in condensate pump allows for flexible drainage up to 19.6 feet vertically or horizontally.
- User-Friendly Controls: Features an intuitive display for humidity setting, continuous mode, GPP mode, coil temperature, and defrost status.
- Automatic Defrost: Prevents ice buildup on coils, ensuring efficient operation in cooler environments.
- Memory Start: Automatically restarts with previous settings after a power interruption.
- Low Noise Operation: Operates at less than 48.3 dBA.
- Durable Construction: Rugged metal and plastic housing designed for harsh environments.
- Environmental Refrigerant: Uses R32 refrigerant for efficiency and reduced environmental impact.
2. Safety Information
Please read all safety instructions carefully before operating the dehumidifier to prevent injury or damage to the unit.
- Always ensure the unit is placed on a stable, level surface.
- Do not block air intake or exhaust vents. Maintain at least 1 foot of clearance around the unit.
- Ensure the power cord is not damaged and is properly grounded.
- Do not operate the unit in areas with standing water or excessive moisture.
- Unplug the unit before performing any maintenance or cleaning.
- Keep children and pets away from the operating unit.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
3. Setup and Installation
3.1 Unpacking
- Carefully remove the dehumidifier and all accessories from the packaging.
- Verify that all included components are present: Dehumidifier, Gravity Drain Hose, Pump Drain Hose, User's Guide.
- Inspect the unit for any shipping damage. If damage is found, contact customer support immediately.
3.2 Placement
For optimal performance, place the dehumidifier in a central location within the area requiring dehumidification. Ensure adequate airflow around the unit.
Image: The dehumidifier shown in commercial, basement, crawl space, and laundry room environments, illustrating versatile placement options.
3.3 Drainage Options
The Shield 85P offers two methods for continuous water drainage:
Image: Diagram showing the two drainage methods: gravity drainage with a 6.5 ft hose and pump drainage with a 19.6 ft hose, indicating drain height capabilities.
- Gravity Drainage: Connect the included 6.5 ft drainage hose to the gravity drain port and direct it to a floor drain. Ensure the hose is sloped downwards to allow water to flow by gravity.
- Pump Drainage: For situations where a floor drain is not available or water needs to be directed upwards, use the built-in condensate pump. Connect the included 19.6 ft pump drain hose to the pump outlet. The pump can lift water up to 19.6 feet. Ensure the rubber stopper is used to plug the gravity drain hole when using pump drainage.
3.4 Power Connection
Plug the dehumidifier into a grounded electrical outlet. Ensure the voltage matches the unit's requirements.
4. Operating Instructions
4.1 Control Panel
The dehumidifier features a smart LCD display for easy operation and monitoring.
Image: Close-up of the dehumidifier's LCD display, showing humidity settings, temperature, relative humidity, and operating status.
- Humidity Setting: Adjust the desired humidity level using the control buttons. The unit will operate until the set humidity is reached.
- Continuous Mode: For maximum dehumidification, select continuous mode. The unit will run constantly regardless of humidity levels.
- GPP Mode: Grains Per Pound (GPP) mode accurately measures the humidity level by calculating the number of grains of moisture per pound of air, providing precise readings for effective moisture removal.
- Coil Temperature Display: Shows the current temperature of the evaporator coils.
- Defrost Display: Indicates when the unit is in defrost cycle.
- Troubleshooting Interface: Provides error codes or indicators for operational issues.
- Drainage Mode Switch: Allows selection between gravity and pump drainage.
Image: Explanation of GPP Mode, detailing how it measures humidity by grains of moisture per pound of air for precise control.
4.2 Automatic Defrost Function
The unit is equipped with an automatic defrost function. If frost builds up on the evaporator coils, the unit will temporarily stop dehumidifying and enter a defrost cycle. During this cycle, moisture removal may decrease until the coils are clear and the unit resumes normal operation.
Image: Visual representation of the auto defrost cycle, showing frost on coils and the process of clearing it for continued operation.
4.3 Memory Start
In the event of a power outage, the unit will automatically restart with the last saved settings once power is restored.
4.4 Optional Remote Control
An optional remote control (purchased separately) can be used to adjust settings from a distance, enhancing convenience.
Image: The dehumidifier in a living room setting, with an optional remote control shown for convenient operation.
5. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your dehumidifier.
5.1 MERV-1 Filter Maintenance
The unit is equipped with a MERV-1 filter to protect internal components from dust and particles. Regular cleaning and replacement are essential.
- Access: The MERV-1 filter is easily accessible for cleaning.
- Cleaning: The filter can be washed. It is recommended to replace the filter after two washes or every 3 months, whichever comes first.
- Replacement: Optional replacement MERV-1 filters are available.
Image: Illustration showing the MERV-1 filter being cleaned under running water, emphasizing easy maintenance.
5.2 General Cleaning
- Wipe the exterior of the unit with a soft, damp cloth.
- Do not use abrasive cleaners or solvents.
- Ensure the unit is unplugged before cleaning.
6. Troubleshooting
If you encounter issues with your dehumidifier, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power, power cord unplugged, circuit breaker tripped. | Check power connection, ensure outlet is functional, reset circuit breaker. |
| Unit is running but not dehumidifying. | Air filter clogged, room temperature too low, humidity setting too high, unit in defrost mode. | Clean or replace air filter, ensure room temperature is above 41°F (5°C), lower humidity setting, wait for defrost cycle to complete. |
| Water is not draining. | Drain hose kinked or blocked, pump malfunction (if using pump drainage), gravity drain not sloped correctly. | Check and clear drain hose, ensure proper slope for gravity drainage. If using pump, verify pump operation and ensure it restarts after power interruptions. |
| Unit is noisy. | Unit not level, air filter clogged, fan obstruction. | Ensure unit is on a level surface, clean air filter, check for obstructions around fan. |
If the problem persists after attempting these solutions, please contact ARGENDON customer support.
7. Specifications
Detailed technical specifications for the ARGENDON Shield 85P dehumidifier.
Image: The dehumidifier with its dimensions (12.8"D x 21.3"W x 14.6"H) and weight (55.8 lbs) clearly labeled.
| Specification | Value |
|---|---|
| Brand | ARGENDON |
| Model Name | Shield 85P |
| Dehumidification Capacity (Max) | 180 Pints/Day |
| Dehumidification Capacity (AHAM) | 85 Pints/Day (80°F, 60% RH) |
| Coverage Area | Up to 2,300 Square Feet |
| Air Flow Capacity | 194 Cubic Feet Per Minute (CFM) |
| Product Dimensions (D x W x H) | 12.8" x 21.3" x 14.6" |
| Item Weight | 55.8 Pounds (25.3 kg) |
| Material | Metal, Plastic |
| Refrigerant | R32 |
| Special Features | Adjustable Humidity Control, Automatic Defrost, Built-In Pump, Continuous Draining, Memory Start |
| Included Components | Dehumidifier, Gravity Drain Hose, Pump Drain Hose, User's Guide |
| Certifications | ETL Certified |
8. Warranty and Support
8.1 Limited Warranty
ARGENDON dehumidifiers come with a 5-year limited warranty, demonstrating commitment to product quality and customer satisfaction.
Image: Detailed breakdown of the 5-year limited warranty coverage for ARGENDON dehumidifiers.
- 6-Month Parts and Labor: Includes shipment charges for replacement parts or units.
- 1-Year Parts and Labor: Excludes shipment charges to send defective product back for repair or replacement.
- 3-Year Parts and Labor: Coverage for refrigeration system only.
- 5-Year Compressor and Coil: Specific coverage for these critical components.
For additional warranty information, please refer to the product user manual or contact customer support.
8.2 Customer Support
A professional customer support team is available to assist with any technology or installation issues. Please refer to your product packaging or the official ARGENDON website for contact information.