1. Introduction
Thank you for choosing the Tribesigns 180x80 cm Dining Table. This manual provides essential information for the safe assembly, proper use, and maintenance of your new table. Please read these instructions thoroughly before beginning assembly and retain them for future reference.
2. Safety Information
- Always follow the assembly instructions carefully.
- Do not exceed the recommended maximum weight capacity of 150 kg (330 lbs) to prevent damage or injury.
- Assembly should ideally be performed by two persons due to the weight and size of the components.
- Keep all small parts and packaging materials away from children and pets.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten if necessary.
- Avoid placing hot items directly on the tabletop without protective mats.
- Wipe up spills immediately to prevent water damage to the tabletop surface.
3. Package Contents
Please verify that all components are present before assembly. If any parts are missing or damaged, please contact customer support.
- Tabletop sections (Vintage Grey finish)
- Metal Leg Frames (Black)
- Adjustable Foot Pads
- Assembly Hardware (screws, bolts, Allen key)
- Instruction Manual
4. Setup and Assembly
Follow these steps to assemble your Tribesigns Dining Table. It is recommended to have two people for assembly.
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface (like a rug or cardboard) to prevent scratches.
- Attach Leg Frames: Secure the metal leg frames to the tabletop sections using the provided screws and bolts. Ensure all connections are firm but do not overtighten initially.
- Connect Tabletop Sections: If the tabletop comes in multiple sections, align and connect them according to the instructions, securing with the designated hardware.
- Install Adjustable Foot Pads: Screw the adjustable foot pads into the bottom of each leg. These will help stabilize the table on uneven surfaces.
- Final Tightening: Once all parts are assembled, carefully stand the table upright. Then, go back and fully tighten all screws and bolts.
- Level the Table: Adjust the foot pads as needed to ensure the table is stable and does not wobble.
Image: Table dimensions for reference during assembly.
Image: Adjustable foot pads for stability on uneven floors.
5. Operating (Usage)
Your Tribesigns Dining Table is designed for versatile use in various settings.
- Seating Capacity: The 180x80 cm surface comfortably accommodates 6 to 8 people, making it suitable for family meals and gatherings.
- Multifunctional Use: This table can serve as a dining table, a spacious desk for work or study, a craft table, or a gaming table.
- Placement: Ideal for dining rooms, kitchens, and living rooms, its industrial style with a vintage grey finish complements various interior designs.
Image: The dining table set up in a home environment.
6. Maintenance
Proper care will extend the life and appearance of your dining table.
- Cleaning: Wipe the tabletop and metal frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that can damage the finish.
- Spills: Immediately wipe up any liquid spills to prevent water damage or staining, especially on the wood-look surface.
- Heat Protection: Always use coasters or placemats under hot dishes and beverages to protect the tabletop from heat marks.
- Weight Distribution: Distribute weight evenly across the table surface. Avoid concentrating heavy items in one spot.
- Fastener Check: Periodically check all screws and bolts and re-tighten them as needed to maintain stability.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table wobbles | Uneven floor or loose fasteners. | Adjust the foot pads on the bottom of the legs until the table is stable. Check and tighten all assembly screws. |
| Parts do not align during assembly | Incorrect orientation of parts or overtightened screws. | Loosen all screws slightly, re-align parts, then tighten. Ensure parts are oriented as shown in the assembly diagram. |
| Scratches on surface | Rough handling or sharp objects. | Use placemats and coasters. Avoid dragging objects across the surface. Minor scratches may be touched up with furniture repair pens (not included). |
8. Specifications
| Brand: | Tribesigns |
| Model Number: | DTU0149 (also U0149DT) |
| Color: | Vintage Grey |
| Product Dimensions: | 180 cm (Length) x 80 cm (Width) x 75 cm (Height) |
| Item Weight: | 28 kg (61.7 lbs) |
| Maximum Weight Capacity: | 150 kg (330 lbs) |
| Material: | Engineered Wood (tabletop), Metal (frame) |
| Special Features: | Adjustable height foot pads |
| Style: | Industrial |
Image: Tabletop thickness (1.5 cm).
Image: Metal frame dimensions (5 cm x 5 cm).
9. Warranty and Support
Tribesigns is committed to providing quality products and customer satisfaction. While specific warranty details are not provided in this manual, we offer reliable service and support for your purchase.
For any questions, missing parts, or assistance with assembly or product use, please contact Tribesigns customer support through the retailer where you purchased the product or visit the official Tribesigns website for contact information.
We recommend keeping your purchase receipt as proof of purchase.
