yoose Nose Hair Trimmer User Manual

Introduction

Thank you for choosing the yoose Alloy Rechargeable Nose Hair Trimmer. This device is designed for effective and comfortable removal of unwanted hair from the nose and ears. Its compact, portable design and IPX7 waterproof rating make it ideal for both home use and travel. Please read this manual thoroughly before use to ensure proper operation and maintenance.

What's in the Box

• 1 x yoose Alloy Nose Hair Trimmer
• 1 x USB-C Charging Cable
• 1 x Cleaning Brush
• 1 x User Manual
• 1 x Silver Card Graffiti Gift Box

Setup

Charging the Device

Before initial use, fully charge your yoose Nose Hair Trimmer. The device features a built-in Li-ion battery (350 mAh) and supports USB-C charging for convenience. A full charge provides up to 45 minutes of runtime.

1. Locate the USB-C charging port on the trimmer.
2. Connect the provided USB-C charging cable to the trimmer and a compatible USB power source (e.g., wall adapter, computer USB port).
3. Allow the device to charge completely. The charging indicator light (if present, not specified in input) will typically change or turn off when fully charged.

Operating Instructions

The yoose Nose Hair Trimmer is designed for painless and efficient trimming of nose and ear hair. It features a one-button design for simple operation.

1. Ensure the device is adequately charged.
2. Remove the protective cap from the trimmer head.
3. Press the power button to turn on the trimmer. The high-speed 10,000 RPM motor will activate the dual-edged blades.
4. Slowly and gently insert the comfortable tapered tip into your nose or ear.
5. Allow the trimmer to operate for at least 60 seconds to effectively trim hairs to the appropriate length. The 360° capture system ensures thorough trimming without pulling.
6. After trimming, press the power button again to turn off the device.
7. Clean the device as described in the Maintenance section.

Note: This trimmer is designed to trim nose hair to the proper length, not to completely remove it, which helps protect the health of your nasal passages.

Maintenance

Regular cleaning ensures optimal performance and hygiene of your yoose Nose Hair Trimmer. The device is IPX7 waterproof, allowing for easy cleaning.

1. Ensure the trimmer is turned off before cleaning.
2. Gently twist and detach the cutter head from the main body of the trimmer.
3. Rinse the detached cutter head and the main body under running water to remove any trimmed hairs and debris. You may use the provided cleaning brush for stubborn hairs.
4. Allow both parts to air dry completely before reassembling.
5. Once dry, reattach the cutter head by aligning it and twisting until it clicks securely into place.

Safety Information

• Avoid direct contact with moving blades to prevent cuts or skin irritation.
• Clean the device thoroughly after each use to prevent bacterial growth and maintain hygiene.
• Do not use the trimmer near water or while charging to avoid electrical hazards, unless specifically designed for wet use (this product is IPX7 waterproof, but charging near water is still not recommended).
• Keep out of reach of children.
• Do not disassemble or attempt to repair the device yourself. Contact customer support for assistance.

Troubleshooting

If you encounter any issues with your yoose Nose Hair Trimmer, please refer to the following common solutions:

If the problem persists after attempting these solutions, please contact yoose customer support for further assistance.

Specifications

Warranty & Support

Your yoose Nose Hair Trimmer comes with a warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions. For product support, technical assistance, or warranty claims, please contact yoose customer service.

You can find more information and contact details on the official yoose store page: yoose Store.

Official Product Videos

There are currently no official product videos provided by the seller for this item. All available videos are from customer reviews.