1. Setup Instructions
This section guides you through the initial setup of your CHARGEWORX Magnetic Wireless Charging Stand.
1.1 Inserting the MagSafe Charger
The stand is designed to securely hold a MagSafe charging cable (not included). Follow these steps to properly install your charger:
- Locate the circular cutout on the top surface of the silicone stand.
- Identify the cable management channel within the stand's hollow interior.
- Carefully thread the charging cable of your MagSafe charger through the designated opening at the bottom of the stand and up through the interior channel.
- Insert the MagSafe charging puck into the circular cutout on the top of the stand. Ensure the puck sits flush and securely within the cutout.
- Gently pull any excess cable through the bottom opening to ensure a snug fit and discreet cable management.
Image: A hand inserting a MagSafe charging puck into the circular cutout of the CHARGEWORX stand, with the cable being routed through the stand's interior.
Image: A close-up view of the stand's interior, highlighting the discreet cable management system that keeps the charging cable organized and out of sight.
1.2 Connecting to Power
Once the MagSafe charger is securely in place, connect the USB-C end of the charging cable to a compatible power adapter (not included) and plug it into a wall outlet. The stand is now ready for use.
Video: A demonstration of setting up the CHARGEWORX Magnetic Wireless Charging Stand, including inserting the MagSafe charger and placing a phone for charging.
2. Operating Instructions
This section details how to use your charging stand effectively.
2.1 Placing Your Device for Charging
The CHARGEWORX stand is compatible with iPhone 16, 15, 14, 13, and 12 series devices when used with a MagSafe charging cable. Simply place your MagSafe-compatible iPhone onto the charging puck. The magnetic connection will align your device for optimal wireless charging.
Image: An iPhone placed on the CHARGEWORX stand, displaying the charging animation.
2.2 Vertical and Horizontal Placement
The stand supports both vertical (portrait) and horizontal (landscape) orientations for your iPhone while charging. This allows for versatile viewing angles, whether you are making video calls, watching media, or monitoring notifications.
Image: An iPhone securely held in portrait orientation on the charging stand.
Image: An iPhone securely held in landscape orientation on the charging stand, ideal for media consumption.
Video: A demonstration of placing an iPhone on the stand and rotating it between portrait and landscape modes while charging.
3. Maintenance
Proper care ensures the longevity and appearance of your charging stand.
3.1 Cleaning Instructions
The stand is made from premium silicone material. To clean, gently wipe the surface with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the silicone finish.
Image: A close-up of the stand's soft silicone material, which protects devices from scratches.
4. Troubleshooting
If you encounter issues with your CHARGEWORX Magnetic Wireless Charging Stand, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| MagSafe charger does not fit or protrudes. | Charger not fully seated or cable not properly routed. | Ensure the MagSafe puck is pushed firmly into the circular cutout until it is flush. Verify the cable is correctly threaded through the internal channel and pulled taut from the bottom. |
| Phone does not charge. | Loose connection, incompatible charger/adapter, or phone misalignment. | Check that the MagSafe charger is properly connected to a power adapter and the adapter is plugged into a working outlet. Ensure your phone is MagSafe-compatible and correctly aligned with the charging puck. |
| MagSafe charger comes out when removing phone. | Strong magnetic force between phone and charger, or charger not securely seated. | Ensure the MagSafe puck is firmly seated in the stand. When removing your phone, gently slide it off the charger rather than pulling directly upwards. |
5. Specifications
Key technical details for the CHARGEWORX Magnetic Wireless Charging Stand:
- Brand: CHARGEWORX
- Model Number: AZ1017BK
- Color: Black
- Material: Premium Silicone
- Compatible Devices: Smartphones (iPhone 16, 15, 14, 13, 12 series with MagSafe)
- Mounting Type: Tabletop
- Fastening Type: Magnetic
- Item Dimensions: 3.5 x 3.5 x 2.7 inches
- Item Weight: 3.4 Ounces
- UPC: 643620037010
Image: Diagram showing the compact dimensions of the CHARGEWORX Magnetic Wireless Charging Stand.
6. Warranty Information
This CHARGEWORX product is covered by a 90-day manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.
7. Customer Support
For further assistance, technical support, or warranty inquiries, please contact CHARGEWORX customer service. Refer to the product packaging or the official CHARGEWORX website for the most current contact information.
You can also visit the CHARGEWORX Store on Amazon for additional product information and support resources.