Midea MLC27N3AWW
Midea 24 Inch Washer and Dryer Combo User Manual
Model: MLC27N3AWW
1. Important Safety Information
Read all instructions before using the appliance. To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following:
- Always disconnect the appliance from the power supply before cleaning or performing any maintenance.
- Do not wash or dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances.
- Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children.
- Do not install or store this appliance where it will be exposed to the weather or to freezing temperatures.
- Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that you understand and have the skills to carry out.
- Ensure the appliance is properly grounded.
- REMOVE the FOUR Shipping Bolt Assemblies from the back before using, or that may cause violent vibration and severe damage to your machine. Professional installation and additional accessories required.
2. Product Overview
The Midea 24 Inch Washer and Dryer Combo is an all-in-one appliance designed for efficient laundry care. It combines washing and drying functions in a single unit, ideal for maximizing space in various living environments.

Front view of the Midea 24 Inch Washer and Dryer Combo, showcasing its compact design and front-load door.
Key Features:
- Wash and Dry in One: Eliminates the need to transfer laundry between machines.
- Energy & Space Saving: Compact size with 2.7 cu.ft capacity, suitable for families of 3-4. Features a BLDC inverter quattro motor for energy efficiency.
- Overnight Wash & Dry: Convenient cycle to complete laundry overnight.
- Concise Control Panel: Intuitive interface with 16 programs and 6 extra features.
- Steam Care: Softens clothing and helps eliminate stains, germs, and bacteria.
- Air Fluff: Keeps clothes fresh for up to 8 hours after drying, preventing odors.
3. Setup and Installation
Unpacking and Removing Transport Bolts:
Before operating the appliance, it is critical to remove the four shipping bolt assemblies located at the back of the machine. Failure to do so will result in violent vibration and severe damage during operation.

Illustration showing the rear of the appliance with the four shipping bolt locations marked for removal. These include the bolts, washers, power cord retainers, and rubber grommet spacers.
Installation Requirements:
- Power Supply: Requires a standard 120V outlet.
- Venting: This is a ventless machine; no external venting is required.
- Water Connection: Connect the included water inlet hose to a cold water supply.
- Leveling: Ensure the machine is level to prevent excessive vibration during operation. Adjust the leveling feet as needed.
Dimensions:
Refer to the diagram below for product dimensions and recommended installation clearances.

Front view dimensions: 33.5 inches height, 23.4 inches width. Side view dimensions: 33.5 inches height, 25.2 inches depth. Recommended clearances are also shown.
What's in the Box:
- Midea 24 Inch Washer and Dryer Combo Unit
- Water Inlet Hose
4. Operating Instructions
Control Panel Overview:
The appliance features a concise control panel with a central dial for program selection and touch buttons for additional features and settings.

Detailed view of the control panel, showing the program selection dial, digital display, and buttons for Steam, Delay, Temp, Spin, Soil Level, Dry, Express, Air Fluff, and Child Lock.
Washing Cycles:
Select from 16 washing cycles using the program dial to suit various fabric types and soil levels.
- My Cycle
- Normal
- Perm Press
- Heavy Duty
- Bulky
- Baby Wear
- Sanitary
- Sportswear
- Wool
- Quick Wash
- Delicates
- Rinse & Spin
- Spin Only
- Washer Clean
- Wash&Dry (Combined Cycle)
- Dry Only (Combined Cycle)
Drying Cycles:
The appliance offers both timed and sensor drying options.
- Time Dry: Select from 30, 60, or 90 minutes.
- Sensor Dry: Choose Less Dry, Normal Dry, or More Dry for optimal results based on moisture detection.

Visual representation of the drying modes: Time Dry (30, 60, 90 min) and Sensor Dry (Less Dry, Normal Dry, More Dry).
Special Features:
- Steam Care: This function uses steam to soften clothing, reduce wrinkles, and help eliminate germs and bacteria.
- Overnight Wash & Dry: A convenient cycle that allows you to start your laundry at night and wake up to clean, dry clothes. This program typically takes approximately 6 hours to complete.
- Reload Function: To add forgotten items, hold the "Start/Pause" button for 3 seconds. Do not use this function if the water level is above the edge of the inner tub or if the temperature is high.
- Quick Wash (36 min): Ideal for small and lightly soiled loads, such as gym or yoga outfits (approx. 4 lb or 2-4 items).
- Air Fluff: Keeps clothes fresh for up to 8 hours after the dry cycle has ended, preventing odors and maintaining freshness without heat.
Program Default Times:
The following table outlines the default times for various wash and dry cycles:

A visual guide to default cycle durations. Wash & Dry: 5:43h. Dry Only: 4:19h. Time Dry: 0:30h, 1:00h, 1:30h. Wash Cycle Default Times: Normal 1:04h, Quick Wash 0:36h, Heavy Duty 1:40h, Sports Wear 0:57h, Rinse & Spin 0:23h, Bulky 1:23h, Perm Press 0:57h, Delicates 0:58h, Baby Wear 1:37h, Wool 1:01h, Sanitary 2:18h, Washer Clean 1:28h.
5. Maintenance
Washer Clean Program:
The Washer Clean program helps maintain a fresh and clean washer. It uses hot water and powerful water flow to remove dirt and bacteria from the inner cylinder. It is recommended to run this cycle regularly.
General Cleaning:
- Wipe the exterior of the appliance with a soft, damp cloth.
- Clean the detergent dispenser drawer regularly to prevent residue buildup.
- Periodically check and clean the lint filter (if applicable, though ventless models often have self-cleaning condensers).
6. Troubleshooting
This section provides solutions to common issues. For more detailed troubleshooting, please refer to the comprehensive user manual available for download.
| Problem | Possible Cause | Solution |
|---|---|---|
| Excessive Vibration/Noise | Shipping bolts not removed; machine not level; uneven load. | Ensure all shipping bolts are removed. Level the appliance using the adjustable feet. Redistribute laundry inside the drum. |
| Clothes not drying completely | Overloaded drum; incorrect drying cycle selected; insufficient power (120V vs 240V expectations). | Reduce load size. Select an appropriate drying cycle (e.g., "More Dry" or longer "Time Dry"). Note that 120V ventless dryers may take longer than traditional 240V vented dryers. |
| Appliance does not start | Door not closed properly; power cord unplugged; circuit breaker tripped; Child Lock activated. | Ensure the door is securely latched. Check power connection. Reset circuit breaker. Deactivate Child Lock. |
7. Specifications
| Specification | Value |
|---|---|
| Brand | Midea |
| Model Number | MLC27N3AWW |
| Capacity | 2.7 Cubic Feet |
| Item Weight | 161 Pounds |
| Product Dimensions (DxWxH) | 23.4"D x 25.2"W x 33.5"H |
| Voltage | 120 Volts |
| Fuel Type | Electric |
| Annual Energy Consumption | 90 Kilowatt Hours Per Year |
| Number of Washing Cycles | 16 |
| Number of Drying Cycles | 2 |
| Maximum Rotational Speed | 1400 RPM |
| Laundry Appliance Drum Material | Stainless Steel |
| Included Components | Water Inlet Hose |
| Special Feature | Child Lock |
8. Warranty and Support
The Midea 24 Inch Washer and Dryer Combo comes with a 10-year warranty on its BLDC inverter quattro motor, ensuring long-term performance and reliability.
For comprehensive details regarding warranty coverage, technical support, or to download the full user manual, please refer to the official Midea website or the provided PDF document:
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







