LIFUFUTEE Wireless One-Piece Joypad Controller for Nintendo Switch/OLED User Manual

1. Product Overview

The LIFUFUTEE Wireless One-Piece Joypad Controller is designed for use with Nintendo Switch and Switch OLED consoles. It features an ergonomic design, programmable buttons, adjustable turbo speeds, dual vibration, 6-axis gyro sensor, and customizable lighting effects to enhance your gaming experience.

Figure 1: LIFUFUTEE Wireless One-Piece Joypad Controller with Nintendo Switch console.

2. Package Contents

Verify that all items are present in the package:

• 1 x Handheld Wireless Switch Controller
• 1 x Type-C Quick Charging Cable
• 1 x User Manual (This document)

3. Setup and Installation

3.1 Installing the Console

The controller is designed for secure attachment to both Nintendo Switch and Switch OLED consoles. It features an internal anti-slip pad and a safety lock buckle to prevent loosening or accidental detachment.

1. Carefully align your Nintendo Switch or Switch OLED console with the central slot of the controller.
2. Gently slide the console into place until it is securely seated.
3. Ensure the back safety lock is engaged to prevent the console from loosening.

3.2 Initial Connection

The controller utilizes Bluetooth for wireless connection to your console.

1. On your Nintendo Switch console, navigate to the "Controllers" menu.
2. Select "Change Grip/Order" to enter the pairing page.
3. On the LIFUFUTEE controller, press and hold the "HOME" button for approximately 9 seconds.
4. Release the "HOME" button once the controller's indicator lights begin to flash, signifying it is in pairing mode.
5. The console will detect and connect to the controller. Once connected, the indicator lights will stabilize.

Figure 2: Initial connection guide for the controller.

4. Operating Instructions

4.1 Programmable Functions (ML/MR Buttons)

The controller features two programmable keys, ML (Macro Left) and MR (Macro Right), located on the back. Each key can be programmed with up to 21 combinations of standard buttons (A/B/X/Y/L/ZL/R/ZR/L3/R3/D-Pad).

1. To enter programming mode: Press and hold the "Macro" button (located near ML/MR) and either the ML or MR button simultaneously for 2 seconds. The joystick will illuminate with a flashing white light.
2. While in programming mode, press the sequence of buttons you wish to assign to the ML or MR key.
3. To confirm and save the programmed content, press the ML or MR button again. The joystick light will stop flashing.

Figure 3: Location of programmable and macro buttons.

4.2 Auto Loop Macro Programming (SL/SR Buttons)

The SL (Switch Left) and SR (Switch Right) buttons control the auto-looping function of the ML/MR programmed keys.

• To turn on/off the ML/MR function: Double-click the SL or SR button. This prevents accidental activation.
• To auto-loop the ML/MR function: Press and hold the SL or SR button for 3 seconds. The programmed sequence will continuously repeat.

4.3 Turbo Speeds and Auto Attack

The controller supports both Auto and Manual "TURBO" modes for rapid button presses. You can customize the TURBO function for A/B/X/Y/L/ZL/R/ZR/ML/MR buttons.

• Adjustable turbo speeds: 5, 12, or 20 presses per second.
• Refer to the in-game settings or controller manual for specific button combinations to activate and adjust turbo speeds.

Figure 4: Turbo speed settings.

4.4 Vibration and 6-Axis Gyro Sensor

The controller includes dual vibration motors and an advanced 6-axis gyro sensor for enhanced gaming immersion.

• Vibration: 3-level adjustable vibration (Strong/Medium/Off). Adjust through console settings or specific controller button combinations (refer to the quick start guide).
• Gyro Sensor: Provides precise motion detection for games that support motion controls.

Figure 5: Vibration and Gyro Sensor features.

4.5 Colorful Lighting Effects

The controller features 17 different lighting effects, combining various intensities of monochromatic light to create a dynamic gaming atmosphere.

• Use the dedicated light control button (refer to the quick start guide for location) to cycle through the available lighting effects.

Figure 6: Customizable joystick lighting.

4.6 One-Key Wake Up

After the initial connection, you can quickly wake up and reconnect your Nintendo Switch or OLED console from sleep mode.

• Simply press the "HOME" button on the controller to wake up and reconnect to the game console.

5. Charging and Battery

The controller is equipped with a 1000mAh rechargeable battery.

• A full charge takes approximately 3 hours.
• The controller provides over 10 hours of continuous gameplay on a full charge.
• Use the provided Type-C Quick Charging Cable to charge the controller.

Figure 7: Battery and charging information.

6. Specifications

7. Troubleshooting

• Controller not connecting: Ensure the console is on the "Change Grip/Order" screen. Verify the controller is charged. Try restarting both the console and the controller.
• Buttons not responding: Check if the controller is properly connected. Recharge the controller if the battery is low.
• Vibration not working: Ensure vibration is enabled in the console's settings and on the controller (if applicable). Check the vibration level.
• Programmable functions not working: Re-enter programming mode and re-assign the desired button combinations. Ensure the SL/SR buttons are correctly used to activate/deactivate auto-looping.

8. Warranty and Support

LIFUFUTEE provides after-sales support for this product. If you encounter any issues or require assistance, please contact our professional team. We aim to respond within 24 hours and provide support.

Refer to the warranty card included in your package for specific warranty terms and contact information.