Introduction
The EZVALO Under Cabinet Light is a versatile and energy-efficient lighting solution designed for various indoor spaces such as kitchens, closets, cabinets, and wardrobes. It features 80 LED lights, a smart motion sensor with multiple operating modes, three adjustable color temperatures, and dimmable brightness levels. Powered by a 1900mAh rechargeable battery, it offers wireless convenience and easy magnetic installation.

Image: The EZVALO Under Cabinet Light, showcasing its sleek design and included USB-C charging cable.
What's in the Box
- 1 x EZVALO Motion Sensor Under Cabinet Light
- 1 x USB C Charging Cable
- 2 x Adhesive Iron Sheets
- 1 x Instruction Manual
Setup
Installation
The EZVALO Under Cabinet Light offers easy installation thanks to its built-in powerful magnets. It can be directly attached to ferrous surfaces. For non-ferrous surfaces, use the provided highly adhesive iron plates.
- Clean the desired smooth surface thoroughly.
- Place the adhesive iron plates near the laser engraved markings on the back of the light. The magnets will easily adhere to the plates.
- Remove the protective film from the adhesive side of the iron plates.
- Press the light firmly onto the cleaned surface to secure the adhesive plates.
- For optimal motion sensing performance and user experience, install the light within 2 inches from the front edge of the cabinet.
- If installing multiple lights in AUTO mode, maintain a minimum installation distance of 20 inches between them to prevent mutual interference.

Image: Illustration of the laser-engraved magnetic guidance for easy installation.

Image: Step-by-step guide for installing the light using adhesive iron plates, including minimum distance recommendations.
Charging
The EZVALO Under Cabinet Light is equipped with a 1900mAh rechargeable battery. Please ensure the light is fully charged before its first use.
- Connect the provided USB-C charging cable to the light's charging port and a suitable USB power source.
- A red indicator light signifies low battery, while a green indicator light indicates a full charge.
- The light can last 30-60 days with an illumination frequency of 10-20 times daily for 20 seconds each in AUTO mode.
- In Always-On mode, the light can stay illuminated for 6-7 hours at maximum brightness.

Image: Close-up of the light's internal battery and charging port, highlighting its 1900mAh capacity.
Operating Instructions
Work Modes
The light features a smart motion sensor and offers four distinct operating modes:
- Always-On Mode (ON): The light remains continuously illuminated until the battery is depleted or the mode is changed.
- Always-Off Mode (OFF): The light remains off.
- Day Mode (AUTO - Sun Icon): The motion sensor activates the light when movement is detected within a 10 ft / 120° range, regardless of ambient light conditions (day or night). The light turns off after 20 seconds of inactivity.
- Night Mode (AUTO - Moon Icon): The motion sensor activates the light only in dark environments when movement is detected within a 10 ft / 120° range. The light turns off after 20 seconds of inactivity.

Image: Visual representation of the three main work modes: Always On, Day Mode (motion detection in any light), and Night Mode (motion detection in dark environments).

Image: Depiction of the motion sensor light's 10-foot, 120-degree sensing range in a kitchen setting.
Brightness and Color Temperature Adjustment
The light offers customizable brightness and color temperature settings to suit your preferences and environment.
- Adjusting Brightness: Single press the brightness button (sun icon) to cycle through three adjustable brightness levels: Low (15%), Medium (60%), and High (100%).
- Changing Color Temperature: Single press the color temperature button (thermometer icon) to switch between three color temperatures: Warm Light (3000K), Natural Light (4200K), and White Light (6500K).

Image: Detailed view of the light's control panel, showing buttons for dimming, color temperature, and the PIR motion sensor, along with visual examples of 3000K, 4200K, 6500K color temperatures and 15%, 60%, 100% brightness levels.
Product Video
Video: An official product video demonstrating the features and installation of the EZVALO Under Cabinet Lights.
Maintenance
To ensure the longevity and optimal performance of your EZVALO Under Cabinet Light, follow these maintenance guidelines:
- Cleaning: Wipe the light gently with a soft, dry cloth. Avoid using abrasive cleaners or solvents that may damage the surface or electronic components.
- Battery Care: Recharge the light when the indicator shows low battery. Avoid completely draining the battery frequently, as this can reduce its overall lifespan. Store the light in a cool, dry place if not in use for extended periods.
- Sensor Care: Keep the motion sensor lens clean and free from dust or obstructions to ensure accurate detection.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is low or depleted. Incorrect mode selected. | Charge the light fully. Ensure the switch is set to 'ON', 'Day Mode', or 'Night Mode'. |
| Motion sensor not detecting movement. | Incorrect mode (e.g., 'Night Mode' in bright conditions). Sensor obstructed. Out of range. | Switch to 'Day Mode' or ensure environment is dark enough for 'Night Mode'. Clear any obstructions from the sensor. Ensure movement is within 10 ft / 120° range. |
| Battery life is shorter than expected. | Frequent activation. Constant 'Always-On' mode usage. | Reduce frequency of activation if possible. Use 'AUTO' modes for energy conservation. Recharge regularly. |
| Multiple lights interfere with each other in AUTO mode. | Lights installed too close together. | Ensure a minimum installation distance of 20 inches between lights when using 'AUTO' modes. |
Specifications
| Feature | Detail |
|---|---|
| Brand | EZVALO |
| Model Number | EZL2401A |
| Dimensions | 10"L x 1.5"W x 0.55"H (approx. 25.4 x 3.8 x 1.4 cm) |
| Item Weight | 4.16 ounces (approx. 118 grams) |
| Power Source | Battery Powered (Rechargeable) |
| Battery Capacity | 1900mAh Lithium Ion |
| Light Source Type | LED |
| Number of Light Sources | 80 |
| Brightness | Up to 100 Lumen (adjustable: 15%, 60%, 100%) |
| Color Temperatures | 3000K (Warm), 4200K (Natural), 6500K (White) |
| Motion Sensor Range | 10 ft / 120° |
| Installation Type | Magnetic, Adhesive |
| Material | Acrylonitrile Butadiene Styrene, Aluminum |
Warranty and Support
EZVALO is committed to providing high-quality products and excellent customer service. If your product arrives damaged or if you encounter any quality issues, please contact EZVALO directly for assistance.
We genuinely care about every customer's shopping experience and are dedicated to providing a satisfactory solution.
For further support or to explore more EZVALO products, please visit the official EZVALO Store: EZVALO Store on Amazon