1. Introduction
This manual provides detailed instructions for the operation and maintenance of your TKLBLS Z4-4 Channel Professional Audio Mixer. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.
2. Safety Instructions
- Ensure the power supply voltage matches the requirements specified on the device.
- Do not expose the mixer to rain or moisture to avoid electric shock.
- Do not open the casing. Refer all servicing to qualified personnel.
- Avoid placing the device near heat sources or in direct sunlight.
- Disconnect the power cable during lightning storms or when unused for long periods.
- Handle with care as the casing is made of plastic.
3. Product Overview
The TKLBLS Z4-4 Channel Professional Audio Mixer is a versatile sound mixing console designed for various audio applications, including DJ mixing, live streaming, and recording. It features advanced functionalities such as 99 DSP effects, 48V phantom power, USB interface, and Bluetooth 5.0 connectivity.
Key Features:
- +48V Phantom Power: Equipped with a 48V phantom power switch to support professional condenser microphones.
- Signal Attenuation (PAD -26dB) & High Pass Filter (HPF 80Hz): Reduces high-volume input signals by up to -26dB to prevent distortion and eliminates low-frequency noise for clearer audio.
- Mobile/Computer Live Streaming: Supports OTG converter connectivity for mobile phones and direct USB connection for computers, enabling easy recording and live streaming.
- Stereo Line and Microphone Inputs: Two XLR input jacks for microphones, supporting balanced and unbalanced signals, with 3-band equalization adjustments for precise sound control.
- 99 DSP Reverb Effects: Features 99 digital signal processing effects, including reverb and delay, for audio enhancement.
- USB/Flash/MP3 Player Compatibility: Includes a USB sound card and audio interface for easy recording and connection to MAC or PC, supporting various digital audio files and USB device recording.
- Bluetooth 5.0 Wireless Connection: Allows wireless music streaming from pads, mobile phones, tablets, and other Bluetooth devices within a 15-foot range for background music or accompaniment.
Component Identification:
Refer to the diagram below for an overview of the mixer's controls and connections.

Figure 3.1: Labeled diagram of the TKLBLS Z4-4 Channel Audio Mixer control panel and dimensions.
- MIC INPUT: XLR/TRS combo jacks for microphone and line inputs.
- GAIN Knob: Adjusts the input sensitivity for each channel.
- HIGH Knob: Adjusts the high-frequency equalization for each channel.
- MID Knob: Adjusts the mid-frequency equalization for each channel.
- LOW Knob: Adjusts the low-frequency equalization for each channel.
- FX Knob: Controls the send level to the internal effects processor.
- LEVEL Knob: Adjusts the output level for each channel.
- AUX OUT: Auxiliary output for sending audio to external devices.
- USB Interface: For connecting to computers or USB storage devices.
- 48V PHANTOM Switch: Activates +48V phantom power for condenser microphones.
- EFFECTS Section: Controls for selecting and adjusting DSP effects.
- VOLUME FADER: Main output volume control.
- POWER INTERFACE: Connection for the power adapter.
- POWER SWITCH: Turns the mixer on or off.
4. Setup
4.1 Power Connection
- Connect the provided power adapter to the POWER INTERFACE on the rear of the mixer.
- Plug the power adapter into a suitable electrical outlet.
- Ensure the POWER SWITCH is in the OFF position before connecting or disconnecting any cables.

Figure 4.1: Diagram showing the power connection and various input/output connections of the mixer.
4.2 Connecting Microphones and Instruments
- For dynamic microphones or line-level instruments, connect them to the MIC/LINE input jacks using XLR or 1/4" TRS cables.
- For condenser microphones requiring phantom power, connect them to the MIC/LINE input jacks. Activate the +48V PHANTOM switch only after all connections are made and the mixer is powered on. Ensure the volume is turned down before activating phantom power.

Figure 4.2: Close-up of the 48V Phantom Power switch and its application for condenser microphones.
4.3 Connecting to a Computer/Mobile Device
- For Computer Connection (USB): Connect a USB cable from the mixer's USB port to your computer. The mixer will function as an audio interface, allowing recording and playback.
- For Mobile Phone Connection (OTG): Use an OTG adapter and a USB cable to connect your mobile phone to the mixer's USB port. This enables direct recording and live streaming from your phone.

Figure 4.3: Illustration of connecting the mixer to a PC via USB and to a mobile phone via OTG adapter for recording and live streaming.
5. Operating Instructions
5.1 Basic Operation
- Power On: After all connections are made, turn on the POWER SWITCH.
- Adjusting Input Gain: Use the GAIN knob for each channel to set the input level. Adjust until the PEAK indicator flashes only occasionally during the loudest parts of the signal.
- Equalization: Use the HIGH, MID, and LOW knobs to shape the tone of each channel.
- Channel Level: Adjust the LEVEL knob for each channel to control its volume in the mix.
- Main Output: Use the VOLUME FADER to control the overall output volume.
5.2 Using DSP Effects
The mixer features 99 built-in DSP effects. To use them:
- Turn the PROGRAM knob in the EFFECTS section to select an effect number (00-99).
- Press the PROGRAM knob to confirm the selection.
- Use the FX knob on each channel to send the desired amount of signal to the effects processor.
- Adjust the PARAMETER knob in the EFFECTS section to fine-tune the selected effect.

Figure 5.1: Detailed view of the 99 DSP effects available on the mixer, including Reverb, Delay, Ping-Pong Delay, Flanger, Echo, Chorus+Echo, Auto Wah+Echo, Voice Changer, and Tremolo.
5.3 Bluetooth Connectivity
- Activate Bluetooth on your mobile device (phone, tablet, etc.).
- On the mixer, select the Bluetooth input mode (usually indicated by "BLUE" on the display).
- Search for "TKLBLS Z4" or a similar device name on your mobile device and pair.
- Once connected, you can stream audio wirelessly to the mixer.

Figure 5.2: Illustration of wireless Bluetooth connection for audio streaming to the mixer.
5.4 USB Playback and Recording
- USB Playback: Insert a USB flash drive containing MP3 or other compatible audio files into the USB port. Use the mixer's controls to navigate and play tracks.
- USB Recording: The mixer can record audio directly to a connected USB device or function as an audio interface for computer recording.

Figure 5.3: The mixer connected to a laptop for high-quality audio recording and processing.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the mixer's surface. Do not use liquid cleaners or solvents.
- Storage: Store the mixer in a cool, dry place away from direct sunlight and extreme temperatures.
- Cable Management: Ensure all cables are neatly organized and not under strain to prevent damage to connectors and ports.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output. |
|
|
| Distorted audio. |
|
|
| Condenser microphone not working. |
|
|
| Bluetooth connection issues. |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Brand | TKLBLS |
| Model Number | Z4-4 Channel |
| Number of Channels | 4 |
| Connectivity Technology | USB, Bluetooth 5.0 |
| Power Source | Wired Electric |
| Audio Input | XLR |
| Phantom Power | +48V |
| DSP Effects | 99 (Reverb, Delay, etc.) |
| Signal Attenuation | PAD -26dB |
| High Pass Filter | 80Hz |
| UPC | 752619464321 |
| Country of Origin | China |
9. Warranty and Support
9.1 Warranty Information
This product comes with a 1-year warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
Please retain your proof of purchase for warranty claims.
9.2 Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact your retailer or the manufacturer directly. Refer to the product packaging or the manufacturer's official website for contact details.