Jesebang Wireless Earbuds User Manual

Introduction

Thank you for choosing Jesebang Wireless Earbuds, Model BD86. These earbuds are designed to provide a superior audio experience with advanced features such as Bluetooth 5.3 connectivity, HiFi stereo sound, and effective ENC noise reduction for clear calls. The intelligent dual LED display keeps you informed of battery levels, ensuring uninterrupted enjoyment of your music and calls.

What's in the Box

Upon opening your Jesebang Wireless Earbuds package, you will find the following components:

• 1 x Fast Charging Case
• 2 x Wireless Headsets (Earbuds)
• 1 x Type-C Charging Cable
• 1 x Instruction Manual

Image: Contents of the product package, showing the charging case, two earbuds, a USB-C charging cable, and the user manual.

Product Overview

Familiarize yourself with the different parts of your Jesebang Wireless Earbuds and charging case.

Image: A detailed diagram highlighting the components of the earbuds and charging case, including microphones, LED indicators, charging pins, LED digital display, and Type-C input.

• Earbuds: Each earbud features a microphone (Mic 1, Mic 2), an LED indicator, and charging pins.
• Charging Case: Equipped with a dual LED digital display to show battery levels for both earbuds and the case, and a Type-C input port for charging.

Setup

Initial Charging

Before first use, fully charge the earbuds and the charging case. Connect the provided Type-C charging cable to the charging case and a power source. The LED display on the case will indicate the charging status. A full charge takes approximately 1 hour.

Image: Illustration of the earbuds and charging case, emphasizing the 6 hours of playback on a single charge and 30 hours total with the charging case, with a 1-hour fast charging time.

Bluetooth Pairing

To pair your Jesebang Wireless Earbuds with your device:

1. Ensure both earbuds are charged and placed inside the charging case.
2. Open the lid of the charging case. The earbuds will automatically enter pairing mode, and their LED indicators will flash.
3. On your device (smartphone, tablet, laptop), go to Bluetooth settings and turn Bluetooth on.
4. Search for available devices and select "BD86" from the list.
5. Once connected, the earbud LED indicators will stop flashing, and your device will show "Connected."

The earbuds utilize advanced Bluetooth 5.3 technology for a stable and fast connection.

Image: Visual representation of the Bluetooth 5.3 upgrade, highlighting long transmission distance, strong signal stability, and clear sound, with a graph comparing power consumption of different Bluetooth versions.

Operating Instructions

Your Jesebang Wireless Earbuds feature smart touch controls for easy management of your audio and calls.

Image: A visual guide to the touch controls on the earbuds, showing gestures for switching songs, play/pause, rejecting calls, activating Siri, power on/off, and answering calls.

Maintenance

The Jesebang Wireless Earbuds are designed with IPX7 dust and water resistance, making them suitable for daily use and various activities. This rating means they can withstand splashes, rain, and sweat. However, they are not intended for swimming or prolonged submersion.

• After exposure to water or sweat, ensure the earbuds are dry before placing them back into the charging case to prevent damage.
• Clean the earbuds and charging case regularly with a soft, dry cloth. Avoid using abrasive materials or harsh chemicals.

Image: The earbuds and charging case are shown with water droplets, signifying their IPX7 dust and water resistance, indicating suitability for daily life.

Troubleshooting

If you encounter any issues with your Jesebang Wireless Earbuds, please refer to the following common solutions:

• Earbuds not pairing:
  • Ensure both earbuds are charged.
  • Place earbuds back into the case, close the lid, wait a few seconds, then open the lid again to re-enter pairing mode.
  • On your device, forget or delete "BD86" from your Bluetooth list and try pairing again.
  • Ensure your device's Bluetooth is enabled and within range (up to 15 meters).
• Only one earbud working:
  • Check the battery level of the non-working earbud.
  • Place both earbuds back into the charging case, close the lid, and then take them out simultaneously.
  • Clean the charging contacts on both the earbuds and inside the case.
• Poor sound quality or disconnections:
  • Ensure the earbuds are fully charged.
  • Move closer to your connected device to reduce interference.
  • Restart your device and try reconnecting.
  • Check for any physical obstructions between the earbuds and your device.
• Earbuds not charging:
  • Ensure the charging cable is securely connected to both the case and the power source.
  • Verify the power source is active.
  • Clean the charging pins on the earbuds and the charging contacts inside the case.

Specifications

Detailed technical specifications for your Jesebang Wireless Earbuds, Model BD86:

Warranty and Support

Jesebang provides a 2-year warranty for the BD86 Wireless Earbuds, ensuring peace of mind regarding product quality and performance. For any inquiries, technical assistance, or warranty claims, our customer service team is available for a 24-hour response.

Please refer to the contact information provided on the product packaging or the official Jesebang website for support.

Image: Information graphic indicating a 2-year warranty and 24-hour customer service response for Jesebang products.