Jansite P069 Reversing Camera User Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Jansite P069 Multi Compatible Reversing Camera. Designed for a wide range of vehicles including cars, vans, and trucks, this camera offers advanced features such as 360° rotatable lens, multiple signal modes (AHD 1080P/720P/NTSC/PAL), and superior night vision. Please read this manual thoroughly before use to ensure proper functionality and safety.

Product Overview

The Jansite P069 Reversing Camera, highlighting its rotatable lens and signal mode switching capability.

Key features of the Jansite P069 camera, including its adjustable angle, wide view, and robust design.

Setup and Installation

The Jansite P069 camera is designed for versatile installation and compatibility with 12-24V vehicle systems.

Mounting Options

The camera supports various mounting positions to suit your vehicle's requirements.

Illustrations of normal, horizontal, and upside-down installation methods.

Adjusting the Viewing Angle

The camera features a 360° + 45° rotatable lens for optimal viewing angle adjustment.

1. Using the small wrench provided, carefully unscrew the screws on the camera body.
2. Adjust the lens to your desired angle.
3. Tighten the screws to secure the lens in place.

Step-by-step guide for adjusting the camera's lens angle.

Wiring and Connections

Ensure stable signal transmission with the double-shielded cable. The camera uses a 4-PIN connector.

Detailed pinout for the 4-PIN connector.

Operating Instructions

Signal Mode Switching

The camera supports AHD 1080P, AHD 720P, NTSC, and PAL signal modes for broad compatibility with various car monitors.

• Press and hold the switch button on the cable for 3 seconds to cycle through the signal modes until the desired image appears on your monitor.

Guide to switching between different signal modes.

Mirror/Original Image Switching

You can switch between mirror image (for rear view) and original image (for front view) as needed.

• Press and hold the switch button for 3 seconds to toggle between mirror and original image display. This allows the camera to be used as a front camera if desired.

Demonstration of mirror/original image switching.

Reverse Line Setting

The camera allows you to enable or disable the reverse parking lines.

• To hide the reverse line, cut the white line on the camera cable.

Instructions for enabling or disabling parking lines.

Key Features

Super Night Vision

Equipped with a star-grade sensor and F1.8 large aperture, the camera provides enhanced light capture and sensitivity in low-light conditions. The 1080P high-resolution AHD chip and 3D Noise Reduction Technology ensure clear and detailed images, even license plates are visible at night.

Detailed explanation of the camera's night vision capabilities.

170° Ultra-Wide Angle

The 170° wide-angle lens significantly reduces blind spots and expands your field of view, making parking and maneuvering safer by capturing a wider area around your vehicle.

Visual comparison of 170° wide angle versus a standard 140° camera.

Durable and Compatible Design

The camera features an IP69K waterproof rating, alloy casing, and nano waterproof adhesive for durability in various weather conditions. It also incorporates a low heat bucking board to protect internal components and ensure long-term reliability. Compatible with 12-24V models of cars, SUVs, RVs, and pickups.

Overview of the camera's robust design and broad vehicle compatibility.

Explanation of the low heat buckboard design for enhanced safety and durability.

Troubleshooting

If you encounter issues with your camera, please check the following common problems and solutions. It is crucial to ensure that the signal modes of your monitor and camera are compatible.

• Black/White Split or Images: Verify that the signal mode set on the camera matches your monitor's input.
• Ripples Appear: This can indicate signal interference. Ensure the double-shielded cable is properly installed and not damaged.
• Only Reverse Line Visible: Check the signal mode and ensure the camera is outputting a full video signal.
• Black/White Stripes or Screen Jumps: These issues often point to a mismatch in signal modes (e.g., NTSC/PAL, AHD 720P/1080P) or signal instability. Adjust the camera's signal mode using the switch button.

Visual examples of common display issues and the importance of matching signal modes.

Specifications

Maintenance

To ensure the longevity and optimal performance of your Jansite P069 Reversing Camera, follow these maintenance guidelines:

• Cleaning: Regularly clean the camera lens with a soft, damp cloth to remove dirt, dust, or water spots. Avoid abrasive cleaners that could scratch the lens.
• Inspection: Periodically check the wiring and connections for any signs of wear, damage, or corrosion. Ensure all connections are secure.
• Weather Protection: Although the camera is IP69K waterproof, extreme weather conditions (e.g., prolonged exposure to direct sunlight, heavy snow, or ice) can still affect its performance over time. Ensure it is securely mounted to prevent movement in strong winds.

Warranty and Support

Your Jansite P069 Reversing Camera is manufactured by jansite. For any support inquiries, technical assistance, or warranty information, please contact the manufacturer directly.

• Manufacturer: jansite
• Email: jenny@jansite.cn
• Website: www.jansite.cn

Please have your product model number (P069) and any relevant purchase details ready when contacting support.