1. Introduction and Overview
The Axial SCX24 Jeep Gladiator is a 1/24 scale 4-wheel drive rock crawler designed for enthusiasts seeking a realistic and capable remote control experience. This Ready-to-Run (RTR) model comes complete with everything needed to begin operation, including the vehicle, transmitter, battery, and charger. Its detailed polycarbonate body replicates the iconic Jeep JT Gladiator, while its robust metal chassis and oil-filled shocks provide excellent performance over various terrains.
2. What's in the Box
- Axial SCX24 Jeep JT Gladiator 1/24 Scale 4WD RTR
- Assembled SCX24 chassis, drivetrain, and suspension
- Spektrum SLT2 2.4GHz radio system
- Spektrum 350mAh LiPo battery
- 0.5A USB-C charger
- Product Manual
3. Key Features
- Detailed Jeep JT Gladiator polycarbonate body for realistic appearance.
- Oil-filled shocks for smooth suspension travel and improved handling over rough terrain.
- Durable metal chassis providing a robust and resilient frame for off-road adventures.
- Spektrum SLT2 2.4GHz radio system for reliable and responsive control.
- Spektrum 350mAh LiPo battery and 0.5A USB charger for convenient power and recharging.
4. Safety Information
Warning: Read and follow all precautions and instructions before use. Improper use of batteries can result in fire or rupture, causing serious injury and damage to property. Never leave batteries near fire, water or in extreme temperatures. Never exceed the recommended charge rate (C rating). Never short-circuit or alter batteries or related wires in any way. Always use chargers compatible with lithium polymer batteries. Never leave charging batteries unattended. Never charge batteries overnight. Disconnect charger if batteries become hot or puff. Dispose of batteries properly.
Caution: Avoid any impact on batteries. If this occurs, observe the battery pack in a safe area for 10 minutes. If any problems persist, discontinue use and contact Horizon Hobby.
5. Setup
Your Axial SCX24 Jeep Gladiator is a Ready-to-Run (RTR) vehicle, meaning most of the setup is already complete. Follow these steps to prepare for your first drive:
- Charge the Battery: Connect the included Spektrum 350mAh LiPo battery to the 0.5A USB-C charger. Plug the charger into a compatible USB power source. The charger's indicator light will show charging status. Ensure the battery is fully charged before first use.
- Install Transmitter Batteries: The Spektrum SLT2 2.4GHz radio system requires 4 AA batteries (included). Open the battery compartment on the back of the transmitter and insert the batteries, observing the correct polarity. Close the compartment securely.
- Connect Vehicle Battery: Carefully remove the vehicle's body (it's typically held by clips or Velcro). Connect the fully charged LiPo battery to the ESC/Receiver unit inside the vehicle. Ensure the connection is firm.
- Power On: First, turn on the transmitter. Then, turn on the vehicle's power switch. The vehicle and transmitter should automatically bind. If they do not, refer to the included product manual for binding instructions.
Image: The Axial SCX24 Jeep Gladiator shown with its Spektrum SLT2 2.4GHz radio system and 0.5A USB-C charger, ready for setup.
Image: Close-up of the Spektrum SLT2 2.4GHz radio system transmitter, used to control the RC truck.
6. Operating
The Axial SCX24 Jeep Gladiator is designed for precise control and excellent crawling capabilities. Familiarize yourself with the transmitter controls:
- Throttle Trigger: Pull the trigger to move forward, push it away to brake or reverse. The proportional throttle allows for fine speed control, essential for rock crawling.
- Steering Wheel: Turn the wheel left or right to steer the vehicle. The proportional steering provides precise maneuverability.
- Trim Adjustments: Use the trim dials on the transmitter to fine-tune steering and throttle if the vehicle does not drive straight or stops when the trigger is neutral.
The 4-wheel drive system and oil-filled shocks enable the Jeep Gladiator to navigate challenging obstacles and uneven surfaces with ease. Practice in an open area to get accustomed to the controls before attempting more technical crawling.
Image: The black Axial SCX24 Jeep Gladiator RC truck, showcasing its detailed exterior.
Image: The Axial SCX24 Jeep Gladiator RC truck demonstrating its rock crawling capabilities on a rocky terrain.
Image: A close-up view of the oil-filled shock absorber, highlighting a key component for smooth suspension.
7. Maintenance
Regular maintenance will ensure the longevity and optimal performance of your Axial SCX24 Jeep Gladiator:
- Cleaning: After each use, especially after driving in dirt or wet conditions, clean the vehicle to remove debris. Use a soft brush or compressed air for hard-to-reach areas. Avoid using water directly on electronics.
- Inspect Components: Regularly check all screws, nuts, and bolts for tightness. Inspect the drivetrain, suspension components, and steering linkages for any signs of wear or damage.
- Lubrication: Periodically lubricate moving parts such as gears and bearings as recommended in the full product manual to reduce friction and wear.
- Battery Care: Always store the LiPo battery in a cool, dry place and at a storage charge level (typically around 3.8V per cell) if not used for extended periods. Never fully discharge or overcharge the battery.
Image: The durable metal chassis of the Axial SCX24 Jeep Gladiator, viewed from below, showing its robust construction.
Image: A set of precision ball bearings, crucial for smooth operation of the vehicle's moving parts.
8. Troubleshooting
If you encounter issues with your Axial SCX24 Jeep Gladiator, try these basic troubleshooting steps:
- No Power: Ensure the vehicle's battery is fully charged and properly connected. Check that the transmitter batteries are fresh and correctly installed. Verify both the vehicle and transmitter are powered on.
- No Response from Controls: Confirm the vehicle and transmitter are bound. If not, re-bind them according to the product manual. Check for any obstructions in the steering or throttle mechanisms.
- Erratic Behavior: This could indicate radio interference. Try operating the vehicle in a different location away from other electronic devices. Check for loose wires or connections within the vehicle.
- Reduced Performance: A partially discharged battery can lead to reduced speed and power. Fully charge the battery. Inspect the motor and drivetrain for any debris or damage that might be causing resistance.
For more complex issues or persistent problems, refer to the detailed troubleshooting guide in your product manual or contact Axial customer support.
9. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 10 x 10 x 10 inches |
| Item Weight | 2.3 pounds |
| Country of Origin | China |
| Item Model Number | AXI00005V2T5 |
| Manufacturer Recommended Age | 14 years and up |
| Batteries | 1 Lithium Polymer battery required (included) |
| Manufacturer | Axial |
| Release Date | March 4, 2024 |
10. Warranty and Support
For product support, technical assistance, or warranty inquiries, please contact Axial customer service. While specific manufacturer warranty details are provided in the product manual, extended protection plans are available for purchase, including 2-Year and 3-Year Protection Plans, offering additional coverage for your investment.
