Axial SCX24 Jeep Gladiator 1/24 Scale 4WD RC Rock Crawler

Introduction

This instruction manual provides essential information for the proper setup, operation, and maintenance of your Axial SCX24 Jeep Gladiator 1/24 Scale 4WD RC Rock Crawler. Please read this manual thoroughly before operating the vehicle to ensure safe and optimal performance. This ready-to-run (RTR) model is designed for off-road rock crawling and features a detailed Jeep JT Gladiator polycarbonate body, oil-filled shocks, and a durable metal chassis.

What's in the Box

Your Axial SCX24 Jeep Gladiator package includes the following components:

• Axial SCX24 Jeep JT Gladiator 1/24 Scale 4WD RTR Vehicle
• Assembled SCX24 chassis, drivetrain, and suspension
• Spektrum SLT2 2.4GHz Radio System (Remote)
• Spektrum 350mAh LiPo Battery
• 0.5A USB-C Charger

Image: All components included in the Axial SCX24 Jeep Gladiator package.

Safety Precautions

Warning: Read and follow all precautions and instructions before use. Improper use of batteries can result in fire or rupture, causing serious injury and damage to property. Never leave batteries near fire, water, or in extreme temperatures. Never exceed the recommended charge rate (C rating). Never short-circuit or alter batteries or related wires in any way. Always use chargers compatible with lithium polymer batteries. Never leave charging batteries unattended. Never charge batteries overnight. Disconnect charger if batteries become hot or puff. Dispose of batteries properly.

Caution: Avoid any impact on batteries. If this occurs, observe the battery pack in a safe area for 10 minutes. If any problems persist, discontinue use and contact Horizon Hobby.

Setup

1. Unpack the Vehicle: Carefully remove the Axial SCX24 Jeep JT Gladiator from its packaging.
2. Install Remote Batteries: Insert the required batteries into the Spektrum SLT2 2.4GHz radio system (remote control). Refer to the remote control's specific instructions for battery type and orientation.
3. Charge Vehicle Battery: Connect the Spektrum 350mAh LiPo battery to the included 0.5A USB-C charger. Ensure the battery is fully charged before first use. Always follow the battery safety precautions during charging.
4. Install Vehicle Battery: Once charged, carefully insert the LiPo battery into the designated compartment on the SCX24 chassis. Secure it properly to prevent movement during operation.
5. Power On: Turn on the remote control first, then turn on the vehicle. The vehicle and remote should automatically pair.

Image: The Spektrum 2-in-1 ESC/Receiver unit, which manages power and control signals.

Operating Instructions

The Axial SCX24 Jeep Gladiator is designed for precise rock crawling. Its 4-wheel drive system and independent suspension allow it to navigate challenging terrain.

• Throttle Control: Use the trigger on the remote control to accelerate forward or reverse. The proportional throttle allows for fine control over speed, essential for crawling.
• Steering Control: Use the steering wheel on the remote control to turn the vehicle left or right. Proportional steering provides precise maneuverability.
• Terrain Navigation: Approach obstacles slowly and deliberately. The oil-filled shocks and durable chassis are designed to absorb impacts and maintain traction over uneven surfaces.
• Lighting: The vehicle is equipped with functional headlights for improved visibility during low-light operation.

Image: The Axial SCX24 Jeep Gladiator navigating rocky terrain, showcasing its crawling capabilities.

Image: Side profile of the RC truck demonstrating its ground clearance and suspension articulation.

Maintenance

Regular maintenance will extend the lifespan and performance of your RC rock crawler.

• Cleaning: After each use, especially in dusty or dirty conditions, clean the vehicle to remove debris from the chassis, wheels, and drivetrain. Use a soft brush or compressed air.
• Battery Care: Always store the LiPo battery in a cool, dry place. Do not overcharge or over-discharge the battery. Follow all safety warnings regarding battery handling.
• Inspections: Periodically inspect the vehicle for loose screws, damaged parts, or worn tires. Ensure the oil-filled shocks are functioning correctly.
• Lubrication: Lightly lubricate moving parts of the drivetrain as needed, using RC-specific lubricants.

Image: Detail of the oil-filled shock absorber, a key component for smooth suspension.

Troubleshooting

If you encounter issues not listed here, or if suggested solutions do not resolve the problem, please contact Axial customer support for further assistance.

Specifications

Warranty and Support

For warranty information, technical support, or replacement parts, please refer to the official Axial website or contact their customer service department. Keep your proof of purchase for any warranty claims.