MoKo MK-PW21-CXzj-STuo-240304F-Lgrn-fA

MoKo Case for Kindle Paperwhite (12th/11th Gen) and Signature Edition - Instruction Manual

Model: MK-PW21-CXzj-STuo-240304F-Lgrn-fA

Brand: MoKo

Introduction

This instruction manual provides detailed guidance for the proper use and care of your MoKo Slim PU Shell Cover Case. This case is specifically designed to protect your 7"/6.8" Amazon All-New Kindle Paperwhite (12th/11th Generation - 2024/2021 Release) and Kindle Paperwhite Signature Edition. Please read this manual thoroughly to ensure optimal performance and longevity of your product.

Compatibility

The MoKo case is designed for specific Kindle Paperwhite models. Ensure your device matches the compatible models listed below for a proper fit and full functionality.

Compatibility chart showing supported Kindle Paperwhite models

Image: Visual guide to compatible Kindle Paperwhite models and generations.

Compatible Models:

  • 7"/6.8" Amazon All-New Kindle Paperwhite (12th Generation - 2024 Release)
  • 7"/6.8" Amazon All-New Kindle Paperwhite (11th Generation - 2021 Release)
  • Kindle Paperwhite Signature Edition (2024 Release)
  • Kindle Paperwhite Signature Edition (2021 Release)
  • Kindle Colorsoft Signature Edition (1st Gen, 2024)

Not Compatible With:

  • Kindle Paperwhite (10th Generation - 2018 Release)
  • Kindle Paperwhite (7th/6th Generation - 2015/2013 Release)
  • Kindle Paperwhite (5th Generation - 2012 Release)
  • Kindle (11th Generation - 2022 Release)
  • Kindle (10th Generation - 2019 Release)
  • Kindle (8th Generation - 2016 Release)
  • Kindle (7th Generation - 2014 Release)
  • Kindle Oasis (All Generations)
  • Any other Kindle devices not explicitly listed as compatible.

Setup: Installing Your Kindle into the Case

Follow these steps to correctly install your Kindle Paperwhite into the MoKo case:

  1. Prepare Your Device: Ensure your Kindle Paperwhite is clean and free of dust or debris before installation.
  2. Align the Device: Gently slide your Kindle Paperwhite into the designated slot within the case. Ensure the device is aligned with the case's edges and cutouts. The device should fit snugly.
  3. Secure the Device: The case features a secure frame that holds the Kindle in place. Ensure all corners and edges of your Kindle are properly seated within the case's protective frame.
  4. Check Fit: Verify that all ports, buttons, and the screen are accessible and unobstructed. The case should not interfere with the device's functionality.
MoKo case with a Kindle Paperwhite inserted, showing the secure fit

Image: The MoKo case with a Kindle Paperwhite securely installed, demonstrating the protective design.

Operating Your MoKo Case

Automatic Wake/Sleep Function

The case is equipped with a magnetic sensor that automatically wakes your Kindle Paperwhite when the cover is opened and puts it to sleep when the cover is closed. This feature helps conserve battery life.

Diagram illustrating the automatic wake and sleep function of the case

Image: Visual representation of the case's auto wake/sleep functionality, showing the Kindle screen turning on when opened and off when closed.

Magnetic Closure

The front cover features a magnetic closure to keep the case securely shut when not in use, preventing accidental openings and protecting your screen.

Close-up of the magnetic closure mechanism on the MoKo case

Image: Detail of the magnetic closure, highlighting how the cover stays securely closed.

Integrated Hand Strap

For enhanced comfort during extended reading sessions, the case includes an interior hand strap. Slide your hand through the strap to maintain a secure grip and reduce hand fatigue, especially when reading with one hand.

Person using the integrated hand strap on the back of the MoKo case for one-handed reading

Image: A user demonstrating the use of the hand strap for comfortable one-handed operation of the Kindle.

Foldable Kickstand Function

The case features a foldable kickstand that allows you to prop up your Kindle Paperwhite for hands-free viewing. This is ideal for reading at a desk or table.

  1. Activate Stand: Fold the front cover completely back. Locate the integrated kickstand on the back of the case.
  2. Position Device: Extend the kickstand and place your Kindle on a flat surface. Adjust the angle for optimal viewing.
MoKo case with the kickstand extended, supporting the Kindle Paperwhite in an upright position

Image: The MoKo case configured as a stand, holding the Kindle Paperwhite at an ergonomic viewing angle.

Card Slot

A built-in card slot provides a convenient storage option for small items such as cards or notes. This slot is located on the interior of the front cover.

Charging with Case On

The case is designed with precise cutouts to allow full access to all ports and buttons, including the charging port. You can charge your Kindle Paperwhite without removing it from the case.

Kindle Paperwhite in the MoKo case being charged via its USB-C port, visible through a precise cutout

Image: A Kindle Paperwhite inside the MoKo case, connected to a charging cable, demonstrating the accessible charging port.

Maintenance

To maintain the appearance and functionality of your MoKo case, follow these simple cleaning guidelines:

  • Exterior Cleaning: Use a soft, damp cloth to gently wipe the PU leather exterior. Avoid abrasive cleaners or solvents, as these can damage the material.
  • Interior Cleaning: For the microfiber interior, use a dry, soft cloth to remove dust or lint. If necessary, a slightly damp cloth can be used, but ensure the interior is completely dry before reinserting your Kindle.
  • Avoid Excessive Moisture: Do not submerge the case in water or expose it to excessive moisture.
  • Storage: When not in use, store the case in a cool, dry place away from direct sunlight and extreme temperatures.
Close-up of the case material showing wear resistance and scratch proof icons

Image: Depiction of the case's durable PU leather exterior, highlighting its wear-resistant and scratch-proof properties.

Troubleshooting

If you encounter any issues with your MoKo case, please refer to the following common solutions:

  • Auto Wake/Sleep Not Working:
    • Ensure your Kindle Paperwhite is correctly seated within the case. A misalignment can prevent the magnetic sensor from functioning.
    • Check if the Kindle's auto wake/sleep feature is enabled in its settings.
    • Verify that no foreign objects are obstructing the magnetic sensors in the case or on the Kindle.
  • Case Does Not Close Securely:
    • Ensure your Kindle is properly installed and not protruding from the case.
    • Check for any debris or objects caught between the cover and the Kindle screen.
  • Difficulty Accessing Ports/Buttons:
    • Confirm that your Kindle model is compatible with this specific case (refer to the Compatibility section).
    • Re-seat your Kindle in the case, ensuring it is fully pushed into place and aligned with all cutouts.

Specifications

Product Dimensions7.17 x 5.28 x 0.55 inches
Product Weight5.45 ounces
Item Model NumberMK-PW21-CXzj-STuo-240304F-Lgrn-fA
MaterialPU Leather (Exterior), Microfiber (Interior)
FeaturesAuto Wake/Sleep, Magnetic Closure, Hand Strap, Kickstand, Card Slot

Warranty and Support

Specific warranty information for this MoKo product is not provided within this manual. For details regarding warranty coverage, returns, or technical support, please refer to the product packaging, the seller's website, or contact MoKo customer service directly through their official channels.

You may visit the official MoKo store on Amazon for more information: MoKo Store

Related Documents - MK-PW21-CXzj-STuo-240304F-Lgrn-fA

Preview MOKO H3 Bluetooth Beacon: Datasheet and Technical Specifications
Detailed datasheet for the MOKO H3 Bluetooth Beacon, featuring a 3-axis accelerometer, iBeacon/Eddystone compatibility, long battery life, and configurable parameters for IoT applications. Includes physical characteristics, FCC statement, and technical support.
Preview MOKO L03 Anchor Pro Bluetooth Beacon Product Specification
Comprehensive product specification for the MOKO L03 Anchor Pro Bluetooth beacon, detailing hardware, installation, operation, and package information for MOKO's IoT location tracking devices.
Preview LW008-MTE User Guide - MOKO TECHNOLOGY LTD.
Comprehensive user guide for the MOKO LW008-MTE LoRaWAN Tracker. Learn about product features, specifications, installation, app configuration, communication protocols, and troubleshooting.
Preview MOKO LW005-MP APP Configuration Guide
This guide provides detailed instructions on how to configure the MOKO LW005-MP LoRaWAN smart plug using the MKLoRa application. It covers installation, connection, LoRaWAN parameters, general settings, Bluetooth configuration, and device information.
Preview LW001-BGE LoRaWAN Tracker User Guide
This user guide provides comprehensive information on the MOKO LW001-BGE LoRaWAN Tracker, including its features, specifications, installation, configuration via the MKLoRa app, communication protocols, and regulatory compliance. It details uplink and downlink payloads, device parameters, and troubleshooting tips for asset tracking applications.
Preview LW013-SB Smart Button User Guide | MOKO TECHNOLOGY
Comprehensive user guide for the MOKO LW013-SB Smart Button, covering product introduction, specifications, features, setup, configuration, communication protocols, and troubleshooting.