Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Gerrit Cordless Vacuum Lifter and Tile Vibrator. Please read this manual thoroughly before first use and retain it for future reference.
Package Contents
Upon opening the package, please verify that all components listed below are present and undamaged:
- 1 x Cordless Tile Laying Machine (Main Unit)
- 1-2 x Lithium-ion Battery (depending on purchased variant)
- 1 x Battery Charger
- 1 x Storage Bag (as shown in product images)
- 1 x User Manual (this document)
Image: Complete package contents including the tile vibrator, two batteries, charger, and a blue storage bag.
Product Features
The Gerrit Cordless Vacuum Lifter and Tile Vibrator is designed to simplify and improve the efficiency of tile installation. Key features include:
- Adjustable Vibration Frequency: Features 5 adjustable speed settings, easily controlled via a rotary knob, allowing adaptation to different tile sizes and plaster thickness.
- One-Button Vibration: High-frequency vibration replaces manual hammering, significantly improving mosaic efficiency.
- Easy Tile Position Correction: Allows for quick adjustment of tile position by simply pulling the handle.
- Powerful Rubber Suction Plate: Equipped with a large suction cup for strong adsorption, capable of lifting up to 100 kg (220 lb), enabling one-handed operation.
- Self-Locking Handle: The handle automatically locks when fully pulled out, maintaining suction power for extended use.
- Integrated Level: An alcohol bladder (bubble level) is integrated for precise tile alignment.
Setup
1. Battery Charging
Before first use, fully charge the lithium-ion battery. A full charge typically takes approximately 6 hours.
- Connect the charger to a standard power outlet.
- Insert the battery into the charger. Ensure a secure connection.
- The charger's indicator light will show the charging status (refer to charger manual for specific light indications).
- Once fully charged, disconnect the battery from the charger and unplug the charger from the outlet.
Image: Illustration of the high-capacity lithium battery, indicating long endurance.
2. Attaching the Battery
Align the charged battery with the battery slot on the main unit and slide it in until it clicks securely into place.
Operation
This section details the steps for operating your Cordless Vacuum Lifter and Tile Vibrator for efficient tile installation.
1. Powering On and Off
Locate the power switch on the handle. Press to turn the device on or off.
2. Adjusting Vibration Frequency
The device features 5 levels of vibration adjustment. Use the rotary knob on the control panel to select the desired frequency based on the tile size and adhesive thickness.
Image: Close-up of the control panel with 5 levels of adjustment, gear display, and control buttons.
3. Tile Suction and Lifting
The large rubber suction cup allows for secure gripping of tiles up to 100 kg (220 lb).
- Ensure the tile surface is clean and dry.
- Place the suction cup firmly onto the tile.
- Engage the suction mechanism (if applicable, by pressing down or activating a lever). The self-locking handle will secure the suction.
- Carefully lift and position the tile.
Image: The enlarged suction cup demonstrating its strong adsorption capacity and suitability for various tile sizes.
4. Tile Vibration and Laying
After positioning the tile, use the vibration function to ensure proper adhesion and remove air bubbles.
- With the tile in place, press the vibration button (often labeled "Start" or with a vibration icon) on the control panel.
- Move the vibrator across the tile surface to distribute the adhesive evenly and settle the tile.
- Use the integrated alcohol bladder to check for levelness and adjust as needed.
- To correct tile position, slightly pull the handle to release suction and adjust the tile in all directions.
Image: Comparison illustrating the ease and efficiency of machine tile laying compared to manual methods.
5. Applicable Tile Sizes and Uses
The device is suitable for laying tiles ranging from 60 cm to 120 cm. It can be used for various applications including floor tiling, wall tiling, bathroom tiles, and TV background walls.
Image: Visual examples of where the tile vibrator can be effectively used, such as wall and floor tiling.
Maintenance
1. Cleaning
After each use, clean the suction cup and the main unit to remove any adhesive residue or dust. Use a damp cloth; do not immerse the device in water.
2. Battery Care
- Store batteries in a cool, dry place away from direct sunlight.
- Do not expose batteries to extreme temperatures.
- If storing for extended periods, charge the battery to approximately 50% capacity.
Troubleshooting
This section addresses common issues you might encounter. For problems not listed here, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Battery not charged or not properly inserted. | Ensure battery is fully charged and securely inserted into the device. |
| Weak suction. | Suction cup or tile surface is dirty/wet; suction cup is worn. | Clean the suction cup and tile surface. Ensure both are dry. Inspect suction cup for damage and replace if necessary. |
| Vibration is weak or inconsistent. | Low battery charge; incorrect vibration setting. | Recharge the battery. Adjust the vibration frequency using the rotary knob. |
Specifications
| Parameter | Value |
|---|---|
| Product Name | Cordless Tile Laying Machine |
| Brand | Gerrit |
| Model | B0CWXZ86ND (2xli ion variant) |
| Absorption Capacity | ≤100 kg (220 lb) |
| Battery Voltage | 21V |
| Battery Capacity | 8000mAh |
| Vibration Adjustment | 5-speed adjustment |
| Maximum Vibration Frequency | 19,000 rpm |
| Head Material | Thick Aluminum Alloy |
| Applicable Tile Sizes | 60-120 cm (0.6 to 1.2m) |
| Charging Time | Approx. 6 hours |
| Usage Time (per battery) | 6-8 hours (when fully charged) |
| Product Weight | 1.5 kg |
Safety Information
Always observe basic safety precautions when using this product to reduce the risk of injury or damage.
- Wear appropriate personal protective equipment (PPE), such as safety glasses and gloves.
- Keep the work area clean and well-lit.
- Do not operate the device in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Keep children and bystanders away while operating the device.
- Do not force the tool. Use the correct tool for your application.
- Disconnect the battery pack from the tool before making any adjustments, changing accessories, or storing the tool.
- Store idle tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
Warranty & Support
For any problems, suggestions, or support inquiries regarding your Gerrit Cordless Vacuum Lifter and Tile Vibrator, please feel free to contact us. We are committed to providing assistance within 24 hours.
Please refer to your purchase documentation or the seller's information for specific warranty terms and contact details.
